ata-creativezen looks like a legit memory-trashing bug, the rtc fixes
are bitwise inversion of a bool, and the remaining are just unused
static variables.
Change-Id: I1a818d4839cd3a54ca6e85f26feb743a4a9d29dc
Commit 1fb906500a ("x1000: LCD DMA fix") caused a regression
on the Q1 by breaking the LCD_X1000_DMA_WAIT_FOR_FRAME logic,
since the wrong branch of lcd_wait_frame() was taken.
Change-Id: Icb44335f506a1a691280de8219188526bb11468f
All the X1000 targets use "fast" sleep, as opposed to the normal
HAVE_LCD_SLEEP define which creates a user-configurable option.
Remove the ifdefs to make the code a bit easier to read.
Change-Id: Ibb80c92a8e23191651fee61fc8cf6f4e4fac8750
when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
Use AXP2101's egauge battery percent level if available (hw4 units).
If not available (_battery_level() will return -1 on hw1-hw3 units),
fall back to voltage battery level.
Also fix logic in axp2101_battery_status()
Change-Id: Ic300418532dae6f7772fff8bf5e2b32516f3b973
Improve ADC behavior, add correct conversion
for die temperature, add readout of EGauge to debug screen.
Add delay to give ADC time to get a good reading. Initial reading
may still be 1-3% optimistic, which is probably ok.
EGauge appears to be pretty good, but no great need to convert
to using it either.
Change-Id: Iab9d50e2427f656ad0875f9a623b03545fc69881
Turns out they did not swap the stereo switch lines on us,
so this setting isn't really useful. Repurpose it to allow
the user to force the device into headphone or line output mode.
Note that settings other than "Automatic" will cause jack detection
to not work.
Default Automatic.
Change-Id: If94499fbb8f0d92111811fe51f6107ce213b66ad
Check for the ES9018K2M dac in the bootloader for
hw1/hw2 devices. Assume that all devices newer than
hw2 have ES9018K2M DAC unconditionally.
All devices will now report the correct hw revision
in the debug menu under Device Data.
Add devicedata.version field, current version 0.
Rename device_data.lcd_version to device_data.hw_rev.
hw2 devices with older bootloaders which ID as hw1 are special-
cased to keep using hwvol on them. They should still upgrade though.
Change-Id: If0fd5ce3bc6e85e511047721ec18e42fb89312e7
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
bootloader passes the player version to rockbox for LCD init changes
Credit ZappBranigan2972 on forums for original changes
Credit Bilgus for devicedata additions
Change-Id: Ia2ca493edef49b7457e84dc19b05397dc915fa5a
Set number of FSR edges required for DPLL/ASRC lock
Set DPLL bandwidth larger
Both should help prevent dropouts, especially with
sample rates >=96khz
Credit to ZappBranigan2972 on the forums
Change-Id: I55a90d44ac7fcec5894377e32cdadad66bb05610
* Create new 'sector_t' type alias:
* uint64_t for all targets with HAVE_LBA48 or HAVE_SDUC
* unsigned long for the everything else
* Alter all storage APIs to use sector_t instead of 'unsigned long'
* Alter Volume/Partition/storage info structures to use sector_t
* Disk cache converted to sector_t
* ATA Core:
* convert to using sector_t for sector addresses and drive sizes
* Always fill out upper 16 bits of LBA48 addresses
* IDENTIFY INFO is fixed at 512 bytes, not SECTOR_SIZE
* USB mass storage:
* convert to using sector_t for sector addesses and drive sizes
* Implement READ_16/WRITE_16 for LBA48 addresses
* Convert FAT code to use sector_t for all sector references
* output_dyn_value() now accepts int64_t instead of 'int'
* Corrected "rockbox info" to work for (MULTIVOLUME & !MULTIDRIVE)
* Better reporting of disk and (logical+physical) sector sizes in debug info
* Detect SDUC cards and report on storage debug_info screen
To-do: SDUC
* Refactor SD core to remove duplicate code in every driver
* Card probe and init state machine
* Implement core SDUC support
* SD2.0 needs to be 2.0+ (fixed for jz47xx and x1000)
* Host and Card ID (ACMD41)
* 32-bit addressing for all read/write/erase operations (CMD22)
* ADD SDUC to target device drivers, defining HAVE_SDUC as appropriate
Change-Id: Ib0138781a0081664d11511037685503df1b93608
Making line-out default output should allow detection to work
correctly. Headphone detection should work whether or not
headphone is currently the active output due to the
low impedance (relatively) of the headphones. Line-Out sinks
will likely be high impedance, so we need the output
as a pull-down for detection.
Debounce detection to prevent false triggers due to voltage swings
during playback.
Change-Id: If5e497d900330f64d0f49a135e953ee6b0499668
Add HW volume control via ES9018K2M, and reorganize
eros_qn_codec.c/.h, audiohw-erosqnative.c.
This automatically detects the presence of the new DAC and
uses its hardware volume scaling. If not present, use same
SWVOL we have been using so far.
Add debug menu readout of SWVOL/I2C result.
Break out es9018k2m stuff into its own file so that
maybe it can be useful to other ports.
Note that we may need to get smarter about detecting the DAC
type if/when another model emerges.
Change-Id: I586a1cf7f150dd6b4e221157859825952840af56
This is basically identical to the GD5F1GQ4xExx series, except for
the addition of double-data-rate transfer modes (which are useless
for us). These devices may be found in some Surfans F20s.
Change-Id: I2c04c86bd88f2e27d813de7fe01712ce365ba077
When data is not in packed-16-bit mode, flushing the fifo
may result in swapping left and right channels if there
happens to be an odd number of entries in the FIFO.
This is especially likely when switching sample frequencies
for some reason.
When stopping PCM DMA, disable DMA and Underrun Interrupts
and then wait for FIFO to be empty before stopping AIC's playback.
Change-Id: I45b6b022c9e3889627842663cd9b7d2e0affb7c6
The newer players have some changed hardware, but most importantly
the line out now appears to be routed through the stereo switch
instead of being hardwired directly off the DAC.
Disable muting the headphone amp, enable switching the stereo switch,
and rename some of the GPIOs to be more generic since the DAC,
headphone amp, and stereo switch all appear to have changed.
Change-Id: I220fe5e37bcbcd959b544183e1fcf70673a83c13
It's usually only called from init() in main.c, so this is safe.
There is one more call in system-dm320.c from system_init(), but
that's also "safe". I don't know if it's okay to call i2c_init()
twice, but presumably it works...
Change-Id: I9c1cd918d162d9955f7cf03209e836cbd5e30c57
Add INIT_ATTR to some low-hanging fruit in the X1000 code:
GPIO init, GPIO initial state tables, clock init, and DMA init.
Change-Id: Ia02b20945da1bbed103e2e01eaf60553eb5f72d4
Enable INIT_ATTR support in config.h. Load init code to the
codec buffer, following the convention used by other targets
that support INIT_ATTR.
Change-Id: I8935fbaa100f0013bb328d71c4a49ec2ffafd003
Avoid startup code clashing with the .init section, which is
by convention used for INIT_ATTR code that can be discarded
after app initialization.
Change-Id: Id59b7618ef41e65c33fc0f133644e07555a913eb
Get the linker to automatically assign load addresses for
the .iram and .tcsm sections. Taken from the i.MX31 linker
script.
Change-Id: Ic03d577d8690c777726daf373a3289316639bfb9
This flash chip is found on some Surfans F20 units. For our purposes
it's the same as the GD5F1GA4xExx so just #define an alias instead of
adding a whole new chip struct.
Change-Id: I2f4c4fbf1faf3a0c7a1503534430afacbddc426e
The bootloader backup is intentionally simple, but it's a little
*too* simple. Add a sanity check to make sure what we're backing
up or restoring contains the first 8 bytes of the SPL header.
This isn't going to catch all possible problems, but it'll stop
obviously non-functional backups from being restored.
Change-Id: I6e80351aeb96c467f0514bd0ecd77d94ff72a8f8
Merge the x1000 and jz47xx exception handling code since they use
the same exception vectors and handlers. The interrupt handler is
now called from the common exception vector, but remains separate
for each board since they have different IRQ layouts.
The new exception handler can provide a stack traceback from the
interrupted code, rather than the (uninteresting) caller traceback
displayed by panicf. This allows you to see what led up to a null
pointer deref or division by zero, which makes it _much_ easier to
track down errors that occur in common leaf functions like strcmp.
Change-Id: I59a0ebb5e40fcb36505c3bfdb47f8cac2f9936b1
allow buflib_free to check for invalid or already freed handles
within the function -- remove all the invalid handle guards thru core_free
Change-Id: Ibdcbc82760fc93b674c42283fca420d94907df8e
This is another chip used in newer Surfans F20 units. Like the
Winbond chip, it's a 1-gigabit chip with on-die ECC. Notably it
has an expanded 128-byte OOB area that is only accessible when
on-die ECC is disabled.
Change-Id: I2203918a15c914097f5a6bbe4afa2d3a60dc67f7
This chip is apparently used in some Surfans F20 units, and has
the same geometry as the ATO25D1GA. It has an on-die ECC engine.
Change-Id: I4d37a2455620ce43cec0a9bcbb32c776d1a8eba1
Decouple chip IDs from chips, and allow the chip ID table to list
which read ID method should be used. Use a safe controller setup
during identification instead of using the first chip's parameters.
Change-Id: Ia725959c31b2838f4a3a30e5bb7fa6652ef377ed
There is actually no need to parameterize most commands with row
or column cycles, usually the opcode and row/column address width
are linked. When this is not the case we can use raw SFC commands
or define new macros.
Change-Id: I22459d732dc01012e6a8ae026c4fb85495d372b4
Using predefined commands is too inflexible so allow the chip data
to specify I/O commands directly.
Change-Id: Ie8f943914da4b8299678a59b1063c4c6d226e83e
Use per-function sections to avoid linking in x1000_boot_linux()
on normal builds, which prevents link errors due to referencing
a non-existent usb_close().
Change-Id: Ied7b233603c49fc856db8445e368675b181e2f1f
