If the corrections file is not present on the target, then
fall back to the (probably outdated) compile-time builtin version.
Change-Id: I9904b81b2f3737149fc8a905ecd03ff54782bbdf
This keeps all the old descriptions etc that were there before.
Had to fix up the tools some more, honestly feels better to just
rewrite this crap in perl.
Change-Id: Ic15deae200c143ba5457423e12c81f871c0fef09
This is an internal macro which is only used if has_sct()
is set by the generator, so don't generate it if we don't
need to.
Change-Id: I7ad51ad34ecabd833b84a270b5046e77131dcb41
When registers have lot of 1- and 2-bit fields it's possible
to exceed the 13 argument limit. Usually this only shows up
when programming a configuration register, but it's annoying
to have to split up the write. 20 arguments should be enough
to avoid that.
Change-Id: I6240fae4a51ae14600afcfb8a4e3f1e983cbffa6
Add a relative version of the register/field read/write operations
which takes a base address (which may be a void pointer or integer)
and computes the register address using offsets.
Change-Id: I7c012192e67adcd675a0fc1975ca4b16ed87bcac
Floating instances don't have an address and will only generate
child nodes and registers with offsets. The 'nochild' flag will
disable generating the children for a node but will generate the
node's own address, which can be used to generate base addresses.
Change-Id: Ib1014de94531436d5708db46aa684741e7740ace
Register offsets are defined as the address of the register minus
the address of the parent node. If enabled by the generator, these
will be emitted alongside defines for the node base addresses.
This allows the base address to be stored in a variable, and the
offset can be used to access registers relative to the base.
Change-Id: I15576aeb2945293a259007da7f00a26055f4d0f0
Before we only fell back for manuals and fonts, whereas
we also needed to fall back for source and voices. Given that
dev builds only produce the actual binaries, just fall back for
everything else.
Change-Id: Ibd84a942d380f69c86ca2243cb2c192de7efd047
Comments and notes are converted to UTF-8. Already broken multibyte characters are fixed using common sense.
This patch contains no code changes.
Change-Id: Ia511ab84936cb2495ac17309493a9b98727a7902
allow the skin engine to read text files and return a particular line
you then can use ss on that string to allow display of strings from the file
(Playername comes to mind)
able to be used as conditional
%?ft(filename)<Found|Not Found>
if (selected) line of file is empty the tag is treated as #COMMENT
bugfix:
%t(n)%?x<text|text>
would ignore the specified timeout defaulting to 2 seconds
bugfix: cabbiev2.128x160x16.wps was missing %Sx()
for translation on 'Next Track:'
playername.txt generated at boot if it doesn't exist contents: 'Rockbox!'
Change-Id: I04ea4fd411f74c7c6e672657949aa520c2f86f95
allow the skin engine to read text files and return a particular line
you then can use ss on that string to allow display of strings from the file
(Playername comes to mind)
able to be used as conditional
%?ft(filename)<Found|Not Found>
if (selected) line of file is empty the tag is treated as #COMMENT
scroll timeouts now persist thru trackchange
bugfix:
%t(n)%?x<text|text>
would ignore the specified timeout defaulting to 2 seconds
playername.txt generated at boot if it doesn't exist contents: 'RockBox!'
Change-Id: I961910e01be052ef902f77e6d92fc3e367ffe9d0
Since the SPI NOR flash is only used for the bootloader, rename the files accordingly, This is a preparation for the nandboot driver will be introduced, since S5L8720+ don't have an SPI NOR flash anymore.
This is a part of the large iPod Nano 4G and iPod Touch 2G support patch.
Credit: Cástor Muñoz <cmvidal@gmail.com>
Change-Id: Iea835fd2029470bfe9f813631ad4f3db711facc3
This is part of the preparation to add support for iPod Nano 3G and Nano 4G. There are some optimisations left, like merging similar blocks of registers that share the same layout, but the base address have changed between SoC generations.
Change-Id: I4f06727b4061977141b65d39ae19591bd5b29680
Support hw4 units with AXP2101 PMU
Bootloader successfully compiles and loads onto device.
The LCD appears to be identical to hw3 units.
Scroll wheel and buttons work
Audio output works, including volume.
HP/LO detect works
Rockbox build is generic
GPIO gating logic seems to be working as intended now.
- Added new GPIO definitions - some significant overlaps with pins
from previous hardware revisions...
- Added some GPIO definitions for older players we didn't know about
- Add register definitions for AXP2101 from datasheet
(these are very different from AXP192!)
- Add AXP2101 regulator definitions, need to support multiple step
sizes per regulator.
- Verify AXP2101 voltage set multi-range logic
- Verify AXP2101 voltage get multi-range logic
- Make AXP2101 its own driver
- AXP2101 driver should be "minimally viable", though I think
there is some extra functionality that could be implemented.
- Disabling the coulomb counter stuff - we could maybe make
the E-Gauge work for the same purpose, but it only appears to
be used on the debug screen at the moment so it doesn't seem
like it's worth the effort.
- Found new button GPIOs
- Found error in my GPIO setting logic, blue light works now!
- Set LDO/DCDC output voltages to OF's settings, as far as
I can tell.
- Determined we probably want TCS1421_CFG1:0 to be 0x00,
for UFP behavior
- Tested this rb build with both old and new bootloaders on hw1.5,
hw2, hw4 in as many configurations as I can think of, works across
the board.
- Bootloader can install itself on hw4, so nand chip isn't novel
- Uninstallation file can be made by patcher script, works on hw4
- Installation file can be made by patcher script, works on hw4
- Added HW4 to rbutil, manual
Change-Id: I5b75782273e81c2c6f2b9c79501c8b7cbf88391f
sizeof(...) has type size_t which is long unsigned int on amd64, and so
the conversion specifier d without length modifier isn't suitable. There
is the length modifier 'z' for size_t arguments, but this is only
available on Linux. So casting to unsigned long and using 'lu' is the
portable fix.
This fixes:
rkboottool.c:215: warning: format ‘%d’ expects type ‘int’, but argument 4 has type ‘long unsigned int’
This requires a small change to support headers without supports macros. This
generates much simpler macros but disable more advanced macros such as BF_SET,
BF_WR and friends.
Change-Id: Icb5470c3f3e816e83335b4ecfa465be6c26be007
- Give each brand its own entry, and make ranges
of OF versions correspond to hardware changes.
- Temporarily disabled target aigoerosq.
- Post-install hint enabled.
- Added pre-install hint function
- Added optional parameter themename, in case
the target name does not match the themesite name.
- Made Port Status (statusAsString()) only care about platform
string prior to first '.'
- Manual: Remove note that rbutil does not support this model
Issues:
- Cannot uninstall the bootloader - manual instructions are available
Change-Id: I574aad7943ea3d1e543e9449f68240446fec0709
