Richard Barry
066e2bc7d2
Replace portasmHAS_CLINT with configMTIME_BASE_ADDRESS and configMTIMECMP_BASE_ADDRESS definitions in the IAR RISC-V port - portasmHAS_CLIT will still work by deriving the new definitions from the old.
2020-01-09 02:23:51 +00:00
Richard Barry
fbb23055cd
Replace portasmHAS_CLINT with configMTIME_BASE_ADDRESS and configMTIMECMP_BASE_ADDRESS definitions in the GCC RISC-V port - portasmHAS_CLIT will still work by deriving the new definitions from the old.
2020-01-07 01:14:36 +00:00
Richard Barry
eaf9318df8
Add Source/portable/ARMClang file that directs users to the GCC port if they which to use the ARMClang compiler.
2020-01-04 00:14:18 +00:00
Richard Barry
07622ed3ee
Remove driver files that generate compiler warnings from the RISC-V_Renode_Emulator_SoftConsole project.
...
Update RISC-V ports so the interrupt stack is set to a known value before the scheduler is started if the interrupt stack is statically defined rather than re-using the main.c() stack.
2019-11-18 17:23:14 +00:00
Richard Barry
16639d2d63
Update to the latest atomic.h.
...
Improve commenting in RISC-V GCC port.
Fix IAR RISC-V port so the first task starts with interrupts enabled.
Add references to third party page ref using newlib with FreeRTOS into the tasks.c file in each place newlib is referenced.
Move the position of the traceTASK_DELETE() trace macro in case of use with a memory allocator that writes over freed memory even when inside a critical section.
Efficiency improvement: Make sure xTaskIncrementTick() does not return pdTRUE when the scheduler is locked. This just prevents an unnecessary yield interrupt (unnecessary as it is ignored) when xYieldPending happens to be pdTRUE.
2019-11-18 16:28:03 +00:00
Richard Barry
61a003088d
Update RISK-V GCC port to ensure the first task starts with interrupts enabled - previously its interrupts were only enabled after it yielded for the first time.
2019-10-21 04:16:32 +00:00
Richard Barry
80c1cb5de1
Correct code comments that referred to taskYIELD_FROM_ISR to portYIELD_FROM_ISR.
...
Update RV32 port to use 16 byte-alignment all the time (only strictly necessary when using FLOP instructions).
2019-09-24 16:06:21 +00:00
Yuhui.Zheng
74df636c78
sync from github to svn: documentation for RISC-V. This may be a temporary parking location.
2019-09-20 20:47:29 +00:00
Richard Barry
da3d370ff7
RISC-V port updates: The machine timer compare register can now be for any HART, and correct the sequence used to update the 64-bit machine timer compare register on 32-bit cores.
2019-09-04 15:46:45 +00:00
Richard Barry
973a4f9869
Correct alignment of stack top in RISC-V port when configISR_STACK_SIZE_WORDS is defined to a non zero value.
2019-08-27 15:57:45 +00:00
Richard Barry
fb3eaeac40
Added additional xMessageBufferSpacesAvailable() (plural) to existing xMessageBufferSpaceAvailable() (singular) macro as the documentation muddled both.
...
Added #define portPOINTER_SIZE_TYPE uint64_t to the 64-bit RISC-V port layer.
2019-05-13 03:14:05 +00:00
Richard Barry
b51529a284
Update version number ready for next release.
2019-05-11 01:47:37 +00:00
Richard Barry
079d081346
Basic 64-bit RISC-V port now functional. RISC-V port layer automatically switches between 32-bit and 64-bit.
2019-04-29 00:57:14 +00:00
Richard Barry
84377442fc
Added portMEMORY_BARRIER() implemented as __asm volatile( "" ::: "memory" ) into ARM GCC ports to assist with link time optimisation.
2019-04-21 20:15:34 +00:00
Richard Barry
606845492b
Fix potential memory leak in the Win32 FreeRTOS+TCP network interface initialisation sequence.
...
Introduce portMEMORY_BARRIER() macro to assist with memory access ordering when suspending the scheduler if link time optimization is used.
2019-04-17 17:16:04 +00:00
Richard Barry
2265d70499
Correcting spelling mistakes in comments only.
2019-03-08 17:30:49 +00:00
Richard Barry
06596c3192
Prepare the RISC-V port layer for addition of 64-bit port.
2019-03-08 17:03:43 +00:00
Richard Barry
58ba10eee8
Update version number in readiness for V10.2.0 release.
2019-02-17 22:36:16 +00:00
Richard Barry
6844bef74f
Replace the pdf RISC-V documentation with links to the documentation web pages.
2019-02-16 01:15:33 +00:00
Richard Barry
b2b1b09ea5
Fix bug in core_cm3.c atomic macros.
...
Rename the portable/GCC/RISC-V-RV32 directory to just RISC-V as also adding support for 64-bit cores.
2019-02-16 01:08:38 +00:00
