Once all targets are converted we should probably remove all traces of it entirely.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26791 a1c6a512-1295-4272-9138-f99709370657
We can't pop into pc on ARMv4t when using thumb: the T bit won't be
modified if we are returning to a thumb function
Code running on ARMv4t should use the new ldrpc / ldmpc macros instead
of ldr pc, [sp], #4 and ldm(cond) sp!, {regs, pc}
No modification on pure ARM builds and ARMv5+
Note: USE_THUMB is currently never defined, no targets can currently be
built with -mthumb, see FS#6734
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26756 a1c6a512-1295-4272-9138-f99709370657
Enable support for the "force" mode of USB charging. This should work on Gigabeat S and Nano2g (and any other future target which has a RB usb stack and supports charging) - if a host connection is not detected within 10 seconds of USB insertion, assume that the connected device is an AC charger and charge anyway, if the user has specified "force" as the mode.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26594 a1c6a512-1295-4272-9138-f99709370657
tick_start, fmradio_i2c_init, pcm_init, pcm_postinit, pcm_play_dma_init
Also add some as3525 target specific functions
Make as3525v2 use this attribute
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26328 a1c6a512-1295-4272-9138-f99709370657
Doesn't make a binsize difference (the comment says the order should be optimized for size).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25659 a1c6a512-1295-4272-9138-f99709370657
Lots of the changes are due to changing storage_(read|write)sectors() from macros to wrapper functions. This means that they have to be called with IF_MD2(drive,) again.
Flyspray: FS#11167
Author: Frank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25459 a1c6a512-1295-4272-9138-f99709370657
Introduce STORAGE_ALIGN_DOWN, STORAGE_PAD (using new CACHE_PAD) and
STORAGE_OVERLAP (using new CACHE_OVERLAP), make them useful only when
PROC_NEEDS_CACHEALIGN and STORAGE_NEEDS_ALIGN are defined
Modify PP and nano2g system-target.h accordingly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25336 a1c6a512-1295-4272-9138-f99709370657
Introduce a new .init section for initialisation code, so that it can be copied to an area which is later overwritten before calling. The stack/bss can then overwrite that code, effectively freeing the code size that the initialisation routines need. Gives a few kB ram usage back.
Only implemented for PP and as3525 so far. More targets could be added, as well as more functions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25013 a1c6a512-1295-4272-9138-f99709370657
Compilation shows a warning for the first argument of the lcd_bitmap() call in show_logo().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24911 a1c6a512-1295-4272-9138-f99709370657
Now making the Fuzev2 bootloader build should be pretty easy
TODO:
- write button driver (FlynDice found all buttons already)
- find button light
- decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
- check if backlight code works (I copied Clipv2 code)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
The PP502x DMA controller can only deal with doing DMA to 16-byte-aligned
addresses because we have inadequate control over the cache to prevent
interference. Other targets may also *prefer* cacheline aligned DMAs to
reduce the number of cache operations required. Almost all disk reads in
buffering.c will now be suitably aligned, allowing DMA to be used on PP502x.
Original change from FS#9708 by Boris Gjenero (dreamlayers).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24440 a1c6a512-1295-4272-9138-f99709370657
Reuse some code from Clip (LCD) and a lot of code from AS3525
Add a new CPU type : AS3525v2, identical to AS3525 except it's an ARMv5 (arm926-ejs)
SD code still not working
For an unknown reason LCD doesn't work anymore (to be investigated)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24131 a1c6a512-1295-4272-9138-f99709370657
