| .. |
|
Bottom (extra 1mm for battery, battery tape guides).stl
|
case: adds baked beauty-pass version of case, and subsequent edits (eg. bezel, deeper case)
|
2023-11-06 15:36:17 +11:00 |
|
Bottom (extra 2mm for battery).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Bottom.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.2 (0.4mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.2b (0.5mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.3 (0.4mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.3b (0.5mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.4 (0.5mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.5 (0.5mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Inner) v1.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Outer) v1.4 (0.5mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Outer) v1.5 (0.5mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Button Spring (Outer) v1.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons For Daniel.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v0 (stem, no vertical retainer).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v0.1 (stem with 0.05mm increase, no vertical retainer).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v0.2 (stem with 0.05mm increase, little vertical retainer, no between-button ridge).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v2.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v3 (increased vert tolerance on stem).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v4 (shifted up button, diff retainers).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v5 (stem width reduced by another 1mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v6 (stem width reduced by another 1mm, retainers reduced 0.2mm top and 0.1mm bottom).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons v7 (stem width reduced by another 1mm, retainers reduced 0.2mm top and 0.1mm bottom, thinner retainer still).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Buttons.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
SD Caddy v2.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
SD Cap v1 (lowered height, rails).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
SD Cap v1.1 (lowered height, rails).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
SD Cap v1.2 (lowered height, rails).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
SD Cap v1.3 (lowered height, rails, pull bottom up a smidge, bevel bottom).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Switch (+0.5mm out, clipped) for Daniel.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Switch (+0.5mm out, clipped, bumpy based on 009c) for Daniel.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Switch (looser tolerances).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Switch v2.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Switch v3.stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (extra 0.25mm for trackpad, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (extra 1mm for trackpad, extra 1mm + 05mm-rhs for bezel, lower sd card top by 1mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (extra 2mm for trackpad).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (extra 2mm for trackpad, extra 1mm for bezel).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (extra 2mm for trackpad, extra 1mm for bezel, lower sd card top by 1mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (extra 2mm switch hole increase).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (tolerance of 0.175mm each side for trackpad, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (tolerance of 0.175mm each side for trackpad, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm, lower top of usb-c by 0.8, correct audio ref).stl
|
case: updates latest STL, updates case changes (tolerance of 0.175mm each side for trackpad, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm, lower top of usb-c by 0.8, correct audio ref).
|
2023-11-06 15:36:17 +11:00 |
|
Top (tolerance of 0.175mm each side for trackpad, trackpad cover ring diameter 40mm, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm, lower top of usb-c by 0.8, correct audio ref).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
|
Top (v chopped).stl
|
case: commit a bunch of historical export STLs
|
2023-11-06 15:36:17 +11:00 |
