case: commit a bunch of historical export STLs

Browse source

...

This commit is contained in:

Robin Howard 2023-11-02 16:44:48 +11:00

parent 44f9ae826b

commit 44a9c47830

70 changed files with 0 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download patch file Download diff file Expand all files Collapse all files

BIN

case/experiments/exports/Replimat Transparentish.3mf Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Bottom (extra 2mm for battery).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Bottom.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.2 (0.4mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.2b (0.5mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.3 (0.4mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.3b (0.5mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.4 (0.5mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.5 (0.5mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Inner) v1.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Outer) v1.4 (0.5mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Outer) v1.5 (0.5mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Button Spring (Outer) v1.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons For Daniel.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v0 (stem, no vertical retainer).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v0.1 (stem with 0.05mm increase, no vertical retainer).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v0.2 (stem with 0.05mm increase, little vertical retainer, no between-button ridge).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v2.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v3 (increased vert tolerance on stem).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v4 (shifted up button, diff retainers).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v5 (stem width reduced by another 1mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v6 (stem width reduced by another 1mm, retainers reduced 0.2mm top and 0.1mm bottom).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons v7 (stem width reduced by another 1mm, retainers reduced 0.2mm top and 0.1mm bottom, thinner retainer still).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Buttons.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/SD Caddy v2.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/SD Cap v1 (lowered height, rails).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/SD Cap v1.1 (lowered height, rails).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/SD Cap v1.2 (lowered height, rails).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/SD Cap v1.3 (lowered height, rails, pull bottom up a smidge, bevel bottom).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Switch (+0.5mm out, clipped) for Daniel.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Switch (+0.5mm out, clipped, bumpy based on 009c) for Daniel.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Switch (looser tolerances).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Switch v2.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Switch v3.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (extra 0.25mm for trackpad, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (extra 1mm for trackpad, extra 1mm + 05mm-rhs for bezel, lower sd card top by 1mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (extra 2mm for trackpad).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (extra 2mm for trackpad, extra 1mm for bezel).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (extra 2mm for trackpad, extra 1mm for bezel, lower sd card top by 1mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (extra 2mm switch hole increase).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (tolerance of 0.175mm each side for trackpad, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (tolerance of 0.175mm each side for trackpad, trackpad cover ring diameter 40mm, extra 1mm + 1mm-rhs for bezel, lower trackpad retainer by 0.2mm, lower sd card top by 1mm, lower top of usb-c by 0.8, correct audio ref).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v10/Top (v chopped).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v7 (switch exp)/Bottom (Chopped).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v7 (switch exp)/Bottom with cutouts.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v7 (switch exp)/Choppy Chop.3mf Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v7 (switch exp)/Top (Chopped).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v7 (switch exp)/Top with cutouts.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Bottom (Chopped) v2.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Bottom (Chopped) v3 Shadowline.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Bottom (Chopped) v4 Uncapped Troughs.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Bottom (Chopped).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Bottom v3 Shadowline.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button v1 (squared).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button v1b (buttons 0.2mm further out on stem).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button v1c (retainer 0.2mm thinner).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button v1d (both - buttons and retainer 0.2mm adj).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button v2 (thinner retainer, shorter, divot cut).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button v2b (thicker middle).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Button.3mf Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/SD Caddy.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Switch v2.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Switch v3.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Switch v4.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Switch v6e (deep curved griddle grip 2).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Switch v6f (deep curved griddle grip 2, lengthened).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Switchy Switch.3mf Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Top (Chopped) v4 Uncapped Troughs.stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Top (Chopped).stl Normal file

View file

Binary file not shown.

BIN

case/experiments/exports/print v8 (switch exp 2)/Top v3 Shadowline.stl Normal file

View file

Binary file not shown.