mirror of
https://git.sr.ht/~jacqueline/tangara-hw
synced 2025-11-09 13:12:38 -05:00
1.4 KiB
1.4 KiB
Bill of Materials
This is a list of every part needed to assemble one Tangara.
| Component | Manufacturer + part number |
|---|---|
| Mainboard PCB | See tangara-mainboard |
| Faceplate PCB | See tangara-faceplate |
| Touchwheel cover (0.6mm FR4) | See touchwheel-cover |
| 15 pos 0.5mm pitch FFC cable | Samtec FJH-15-R-03.00-4 |
| 4x 6mm M2 standoffs | Wurth 970060244 |
| 4x 14mm countersunk M2 screws | |
| 4x 8mm countersunk M2 screws | |
| Case top half | See case-v2 |
| Case bottom half | See case-v2 |
| Switch cover | See case-v2 |
| 2x Button covers | See case-v2 |
| SD card cover | TBD |
| 3-pin 2200mAh 604560 LiPo | EcoCell LIP2-001 |
We're currently finalising our production v2 case design, including the SD card cover. Full sources for these will be available once they're finished.
For the battery, note that a 2-pin cell may be compatible if R1 on the mainboard PCB is populated with a 10k 0603 resitor. We recommend sourcing a suitable battery locally, as international shipping of LiPo batteries can be difficult.