len0rd/tangara-hw
1
0
Fork 0
mirror of https://git.sr.ht/~jacqueline/tangara-hw synced 2025-11-09 13:12:38 -05:00
Code Issues Projects Releases Packages Wiki Activity Actions
119 commits 16 branches 0 tags 783 MiB
Commit graph

119 commits

This branch
This branch
All branches
Author SHA1 Message Date
jacqueline
6ca404233a 0 unrouted on r9, silkscreen positions mostly fixed 2024-02-26 16:48:15 +11:00
jacqueline
d70449d337 start on r9 routing 2024-02-25 09:44:33 +11:00
jacqueline
dda2ef0977 maybe the touchwheel cover should be checked in somewhere! 2024-02-23 15:02:09 +11:00
jacqueline
f084463c96 remove the australian rcm silkscreen 
will deal with australian certification later
 2024-02-07 13:52:13 +11:00
jacqueline
0fff350775 do not short both buttons to gnd :) 2024-01-19 09:39:17 +11:00
jacqueline
594f031785 Use mid-mount buttons with a better actuation point 2024-01-19 09:33:36 +11:00
jacqueline
dc65a9d72e add missing faceplate models 2024-01-03 13:23:46 +11:00
jacqueline
f18dd1b10f Add correct side button model 2024-01-02 15:43:17 +11:00
jacqueline
3dc9915b21 footprint and model tweaks 2024-01-02 15:31:56 +11:00
jacqueline
680880ca32 Remove SPI pullups, tweak routing 2024-01-02 08:59:39 +11:00
jacqueline
cf464c66a3 Add test points, improve ffc pinout 2023-12-21 14:56:57 +11:00
jacqueline
855e890d87 add test points for the analog power rails 2023-12-20 07:54:45 +11:00
jacqueline
4042714299 Invert amp mute gpio 2023-12-15 13:07:14 +11:00
jacqueline
329a9d4ff2 yo i finally fixed that click and pop thing 2023-12-14 21:04:39 +11:00
Robin Howard
02fcafc48e case: Makes the shell + shadow-line radii concentric, so we don't have a blobby/uneven wall-widths at the corners. 2023-12-08 22:25:33 +11:00
Robin Howard
5a7555deb2 case: Has the button face-piece sit out an additional 0.3mm from the case (ie. increase the stem length by 0.3mm) 2023-12-08 19:02:27 +11:00
Robin Howard
ab6a8e3c42 case: Switch to high-fidelity PCB references (sourced from kicad + manual measurements); move port locations and sizes to accomodate. 2023-11-30 16:31:41 +11:00
jacqueline
ab06d00697 correct some npth clearances for aisler 2023-11-25 10:08:52 +11:00
jacqueline
baa4c6dee3 Merge branch 'main' into r7 2023-11-25 07:12:37 +11:00
jacqueline
510134aa3c Add our oshw cert :) 2023-11-17 13:13:57 +11:00
Robin Howard
0c52de2496 case: removes old (Mk2, as opposed to the current "Mk3") case freecad file to uhhh avoid confusion. 2023-11-14 16:38:17 +11:00
Robin Howard
71054f7b7f case: Corrects position of USB cut-out (moves hole 0.15mm towards left side of case). 2023-11-14 03:00:04 +11:00
Robin Howard
3cbcfdb039 case: Corrects position of TRS hole after first test print. 
(Bottom-half of cut-out raised 0.3mm, both halves moved 0.2mm towards
the left side of the case.)
 2023-11-14 02:07:10 +11:00
Robin Howard
fb050f771e case: Fixes USB bottom dimple depth. 2023-11-13 17:06:13 +11:00
Robin Howard
05e3cb5b16 case: Moves USB + TRRS cutouts to match R7 PCB changes. 2023-11-13 05:31:57 +11:00
Robin Howard
e3ed7ead03 case: Correct placement of top+bottom reference PCBs. 2023-11-10 17:41:53 +11:00
Robin Howard
07d095e82d case: Neatened version of reference PCB (imported BREP for reduced lines-everywhere noise). 2023-11-10 17:14:24 +11:00
Robin Howard
df5283f7e2 case: updates the Main PCB reference with the new r7 board+components, and pulls it into the freecad file. 2023-11-09 16:57:29 +11:00
Robin Howard
501740f93b Case: Converts dogbone diameter to spreadsheet dogbone_diameter ref. 2023-11-03 11:39:58 +11:00
Robin Howard
6bee20e4da case: Adds 2mm dogbone to display retainer corners. 2023-11-03 10:31:21 +11:00
jacqueline
36ec79c593 Add models from erin 2023-11-02 10:11:48 +11:00
jacqueline
7d3ae80c0a footprint tweaks + make inner layers pwr/gnd instead of gnd/gnd 2023-11-02 09:33:08 +11:00
Robin Howard
d10456e572 case: Decreases trackpad retainer depth to 0.8mm (fr4_depth). 2023-10-31 13:56:31 +11:00
Robin Howard
cff3731310 case: SD card cutout (adds cuts into the lower case, sets top edge to now be at 13.5mm from the bottom of the base, total cutout is now 4.5mm in height) 2023-10-30 15:54:27 +11:00
Robin Howard
b7e9c846ad Case: adds internals-reference components. 2023-10-30 14:42:33 +11:00
ailurux
162af30f33 Added switch mesh 2023-10-27 17:12:33 +11:00
ailurux
1ef6baff9e Added usb inset and button separator 2023-10-27 16:49:04 +11:00
ailurux
6bf4a3ffb0 Adding Buttons 2023-10-24 17:53:34 +11:00
jacqueline
b3fe617231 Rename project files so apple doesnt get mad at me 2023-10-23 11:46:10 +11:00
jacqueline
ddf998f430 Replace TRS jack with something more durable 2023-10-23 11:43:23 +11:00
jacqueline
d1b34ce7bb r7 routing 
- deal with all the TODOs
 - reduce standby power draw by turning off the 3v3 regulator
 - isolate the esp32 from bat_level when power is off
 2023-10-21 09:40:19 +11:00
ailurux
f62de38dd8 Adjusted the port positions to account for higher lugs 2023-10-20 17:03:59 +11:00
jacqueline
68286afcfc Get more todos out of my head 2023-10-19 21:41:51 +11:00
ailurux
527997d675 Increased lug height, decreased touchpad retainer depth 2023-10-16 15:56:50 +11:00
ailurux
e836c610db Removed unneeded sketch 2023-10-16 14:48:54 +11:00
jacqueline
b1f04efc2f get todos out of my head 2023-10-12 15:48:24 +11:00
ailurux
36bd1ba6c1 Increased tolerance around touchpad 2023-10-10 11:57:26 +11:00
ailurux
f737b7d8f0 Increased wall thickness to 1 2023-10-08 12:08:07 +11:00
ailurux
cc90962eb4 Added button cutout 2023-10-05 13:31:54 +11:00
ailurux
589a0579b4 Resize switch cutout 2023-10-04 19:03:35 +11:00