Thomas Martitz dc07c79263 Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). ... Unify this optimized dbop transfer function and re-use it more often (it still handles 16bit transfers). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24198 a1c6a512-1295-4272-9138-f99709370657		2010-01-07 22:21:41 +00:00
..
sansa-c200v2	Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)	2010-01-06 23:41:36 +00:00
sansa-clip	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
sansa-clipv2	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
sansa-e200v2	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
sansa-fuze	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
sansa-m200v4	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
adc-target.h	Sansa AMS: use the AS3514 ADC driver	2008-11-10 20:55:56 +00:00
app.lds	FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up	2009-06-08 23:05:33 +00:00
ascodec-as3525.c	Sansa AMS : don't use the SHAREDBSS_ATTR since we don't have a coprocessor	2009-06-02 22:45:02 +00:00
ascodec-target.h	FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.	2009-06-30 17:56:21 +00:00
ata_sd_as3525.c	Simplify some expressions using the ? operator	2010-01-01 22:47:25 +00:00
audio-as3525.c	Sansa AMS recording support (Microphone and FM)	2009-11-01 22:51:31 +00:00
backlight-e200v2-fuze.c	FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)	2009-06-18 22:33:02 +00:00
boot.lds	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
button-e200v2-fuze.c	Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)	2010-01-06 23:41:36 +00:00
clock-target.h	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
dbop-as3525.c	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
dbop-as3525.h	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
debug-as3525.c	Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)	2010-01-06 23:41:36 +00:00
debug-target.h	Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver	2009-02-17 02:36:48 +00:00
dma-pl081.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
dma-target.h	Sansa AMS : use SD controller status to notify end of data transfer	2009-01-08 08:27:42 +00:00
fmradio-i2c-as3525.c	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
i2s-as3525.c	Fix Clip firmware building by adding missing symbols	2008-11-10 11:04:43 +00:00
kernel-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
lcd-as-e200v2-fuze.S	ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.	2009-07-11 23:43:44 +00:00
pcm-as3525.c	Sansa AMS : fix recording	2009-11-24 17:59:25 +00:00
power-as3525.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
powermgmt-as3525.c	Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.	2008-11-23 15:00:44 +00:00
powermgmt-target.h	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
system-as3525.c	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
system-target.h	ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.	2009-07-05 01:17:25 +00:00
timer-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
usb-as3525.c	Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader	2009-10-15 10:23:18 +00:00
usb-drv-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00