Thomas Martitz 7dd548c697 Speed up the Fuze's LCD by a factor of ~2.1 (lcd_update()) by using 32bit transfers when possible. ... Unaligned (to 4byte boundary) and odd (where the amount of data is not an integer multiple of 32bit) are still supported. Even those still have a speedup of >2. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22574 a1c6a512-1295-4272-9138-f99709370657		2009-08-31 15:54:25 +00:00
..
sansa-c200v2	Apply FS#10306 to Sansa c200v2 (fix build in the same time)	2009-06-18 22:45:30 +00:00
sansa-clip	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
sansa-e200v2	Apply FS#10447 - e200v2 lcd driver cleanup by Michael Chicoine	2009-08-08 14:37:42 +00:00
sansa-fuze	Speed up the Fuze's LCD by a factor of ~2.1 (lcd_update()) by using 32bit transfers when possible.	2009-08-31 15:54:25 +00:00
sansa-m200v4	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
adc-target.h	Sansa AMS: use the AS3514 ADC driver	2008-11-10 20:55:56 +00:00
app.lds	FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up	2009-06-08 23:05:33 +00:00
ascodec-as3525.c	Sansa AMS : don't use the SHAREDBSS_ATTR since we don't have a coprocessor	2009-06-02 22:45:02 +00:00
ascodec-target.h	FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.	2009-06-30 17:56:21 +00:00
ata_sd_as3525.c	Make sd_present() and mmc_present() look only at the actual presence of a card, not at initialisation state	2009-07-20 13:47:21 +00:00
audio-as3525.c	FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.	2009-02-05 19:57:18 +00:00
backlight-e200v2-fuze.c	FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)	2009-06-18 22:33:02 +00:00
boot.lds	FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up	2009-06-08 23:05:33 +00:00
button-e200v2-fuze.c	FS#10284 - "Sansa e200v2 & Fuze: Merge the button driver into 1 file" by Dustin Skoracki	2009-06-22 22:24:58 +00:00
clock-target.h	AMSSansa: Add AS3525_DRAM_FREQ as a configurable frequency. Attempts to use PCLK != DRAM still fail but a method is now in place. Default scheme remains 248/62/62.	2009-05-29 20:19:35 +00:00
debug-as3525.c	AMSSansa: Use single adc_read instead of multiple ascodec_reads to read voltage for display in View HW info.	2009-07-12 14:12:45 +00:00
debug-target.h	Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver	2009-02-17 02:36:48 +00:00
dma-pl081.c	Patch by Rafaël Carré - Sansa AMS: Fix a few mistakes in DMA code	2009-04-07 17:08:26 +00:00
dma-target.h	Sansa AMS : use SD controller status to notify end of data transfer	2009-01-08 08:27:42 +00:00
fmradio-i2c-as3525.c	Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).	2009-06-20 21:45:04 +00:00
i2s-as3525.c	Fix Clip firmware building by adding missing symbols	2008-11-10 11:04:43 +00:00
kernel-as3525.c	Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h	2009-06-29 14:30:12 +00:00
lcd-as-e200v2-fuze.S	ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.	2009-07-11 23:43:44 +00:00
pcm-as3525.c	FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up	2009-06-08 23:05:33 +00:00
power-as3525.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
powermgmt-as3525.c	Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.	2008-11-23 15:00:44 +00:00
powermgmt-target.h	Enable charging on the Sansa Fuze (charging/discharging curves are still uncalibrated)	2009-06-20 14:29:21 +00:00
system-as3525.c	Sansa AMS: identify interrupts with no source set	2009-08-11 13:20:55 +00:00
system-target.h	ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.	2009-07-05 01:17:25 +00:00
timer-as3525.c	Remove the TIMER_* macros and declare target-specific functions in timer.h	2009-06-29 14:29:57 +00:00
usb-as3525.c	Fix #includes in usb-as3525.c	2009-04-12 19:08:26 +00:00
usb-drv-as3525.c	Samsa AMS: start of an USB driver (nothing working atm)	2009-07-06 13:54:51 +00:00