Rafaël Carré 3520d8e90e Sansa c200v2 : lcd & backlight support, using the c200v1 lcd driver ... The LCD driver is unified and lcd_send_command now takes 2 arguments : the command and its argument. If there is no argument, it's set to 0 and a NOP command is issued If there is more than one argument (set X/Y address), the 2nd argument is sent as a 2nd command, and a NOP command is issued after it. Benefit : c200v2 transfers the command and the argument in one 16 bits transfer Performance should not be affected since commands without argument are only used in lcd_init() and lcd_enable() lcd_send_data() now transfers whole lines (or columns) instead of single pixels yuv is disabled for c200v2 for now Some buttons can be read, including left button (bit 6 of DBOP_DIN), but for some reason they have no effect in rockbox: to be investigated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21321 a1c6a512-1295-4272-9138-f99709370657		2009-06-17 19:55:27 +00:00
..
arm	Sansa c200v2 : lcd & backlight support, using the c200v1 lcd driver	2009-06-17 19:55:27 +00:00
coldfire	Add iAudio M5 FM radio mod to the advanced build options. * Unify iAudio audio driver, fmradio i2c driver, and power driver (M5 + X5 only).	2009-06-12 18:53:44 +00:00
mips	Make some asm() statements volatile	2009-06-16 18:35:57 +00:00
sh	Replace 1UL in BIT_N with 1U to avoid turning it into a 64-bit operation on 64-bit sim targets.	2009-06-06 00:58:57 +00:00