mirror of
https://github.com/Rockbox/rockbox.git
synced 2026-10-10 08:03:04 -04:00
3520d8e90e
The LCD driver is unified and lcd_send_command now takes 2 arguments : the command and its argument.
If there is no argument, it's set to 0 and a NOP command is issued
If there is more than one argument (set X/Y address), the 2nd argument is sent as a 2nd command, and a NOP command is issued after it.
Benefit : c200v2 transfers the command and the argument in one 16 bits transfer
Performance should not be affected since commands without argument are only used in lcd_init() and lcd_enable()
lcd_send_data() now transfers whole lines (or columns) instead of single pixels
yuv is disabled for c200v2 for now
Some buttons can be read, including left button (bit 6 of DBOP_DIN), but for some reason they have no effect in rockbox: to be investigated
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21321 a1c6a512-1295-4272-9138-f99709370657
|
||
|---|---|---|
| apps | ||
| backdrops | ||
| bootloader | ||
| docs | ||
| firmware | ||
| flash | ||
| fonts | ||
| gdb | ||
| icons | ||
| manual | ||
| rbutil | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Check out 'rockbox' from SVN (or extract a downloaded archive).
$ svn co svn://svn.rockbox.org/rockbox/trunk rockbox
or
$ tar xjf rockbox.tar.bz2
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be acquired with the rockboxdev.sh script in the /tools/ folder of the
source, or will have been included if you've installed one of the
toolchains or development environments provided at http://www.rockbox.org/
$ which sh-elf-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fmrecorder
$ cd build-fmrecorder
$ ../tools/configure
$ mkdir build-player
$ cd build-player
$ ../tools/configure
Questions anyone? Ask on the mailing list. We'll be happy to help you!