mirror of
https://github.com/Rockbox/rockbox.git
synced 2026-10-10 08:03:04 -04:00
2adcfa08cf
The S5L8702 has two flash memory controllers; the BootROM uses the first at 0x38a00000 and addresses the second at +0x400. FMC_BASE was defined for the S5L8700 and S5L8701 only. Also add the registers Apple's NANDReadPage (BootROM 0x20009910) uses that are not in the existing S5L8700 set, and three FMCSTAT bits. Their real names are unknown, so they are named for what they were observed to do and the comments say which are inferred rather than measured. No functional change: this header only adds definitions. AI provenance: developed with Claude Opus 5 (Anthropic), used through Claude Code. The model wrote most of the code and this message under Andrew Rice's direction. Any hardware testing described above was carried out by Andrew Rice, who is responsible for this change. Change-Id: Ib8c808128abc9a117cb811fe1fe47bffa4ec0abe |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| docs | ||
| firmware | ||
| fonts | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
| .gitreview | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xJf rockbox.tar.xz
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have mips/m68k/arm-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be generated using the rockboxdev.sh script in the /tools/ folder of the
source.
$ which arm-elf-eabi-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fuzeplus
$ cd build-fuzeplus
$ ../tools/configure
$ mkdir build-xduoox3
$ cd build-xduoox3
$ ../tools/configure
Questions anyone? Ask on the mailing list or on IRC. We'll be happy to help you!