mirror of
https://github.com/Rockbox/rockbox.git
synced 2026-10-10 08:03:04 -04:00
15eec82d8f
On ARMv4 the fixed-phase FIR cycles at 8, 12 and 16 kHz run as adds of shifted samples rather than multiplies: every coefficient is a constant, and a shifted add is one cycle where mla plus loading the coefficient is five or six. Each sample is loaded once per cycle and added into the two or three outputs it feeds, sharing partial products such as 31x between them, about 27 adds per output. The kernels are generated by silk/arm/gen_resampler_armv4.py. Bit-exact; OPUS_ARM_NO_SILK_ASM disables them. Measured on the e200v1, silk_5.opus (WB SILK), with the previous commit: 36.31 -> 28.85 MHz, -20.5%. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Change-Id: Ic1fd5777e91d182248f43954e4b6ae977309dc5d |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| docs | ||
| firmware | ||
| fonts | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
| .gitreview | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xJf rockbox.tar.xz
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have mips/m68k/arm-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be generated using the rockboxdev.sh script in the /tools/ folder of the
source.
$ which arm-elf-eabi-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fuzeplus
$ cd build-fuzeplus
$ ../tools/configure
$ mkdir build-xduoox3
$ cd build-xduoox3
$ ../tools/configure
Questions anyone? Ask on the mailing list or on IRC. We'll be happy to help you!