This prevents needlessly rebuilding the plugin whenever
RBVERSION changes. (This was introduced by the removal
of CVS $Revision$ tags.)
Change-Id: Ic981c86319edb9c7eb7f0c1de71d4fbaba8989ac
On large touchscreens the software keyboard can now run in "point mode". Keys are laid out finger-sized and tapped directly instead of being navigated with a cursor. Targets opt in with HAVE_KBD_POINT_MODE.
Key size is derived from LCD_DPI so a key is about 5mm across whatever the panel density, falling back to a fixed size where DPI is unknown.
A phone-style default layout in the UI font, across three flip pages of eight lines. Page two is page one shifted (i.e caps). Page three completes Latin-1 and adds additional accented letters common to the other European locales.
Space is drawn as an icon, since the UI font has no glyph for it.
Change-Id: Ibe2e305b3c22b1f9152358cf3864b9445b67b463
Co-Author: Claude Opus 4.8
Voices the index, performer, and title of each cuesheet entry. Uses
talkclips if any are available.
Change-Id: If54931cb5bbeb698f23146479192c1d6fe387657
The SCR register is needed for detecting if the card
supports certain commands like SET_BLOCK_COUNT.
Change-Id: I48cbf8fff497b71fb831ba546a462b27bb30851f
When an SBS uses the new %QT tag (added in 96f42a5)
to retrieve the name of the top Quickscreen setting
(thus likely wants to draw its own QS UI), we disable
the built-in interface until a new SBS file is applied.
Fixes lag encountered in Themify 2 due to invisible
built-in Quickscreen UI that kept being re-drawn.
Change-Id: Id4f295f959c2d16d1650f6fc066c3ceca6685405
Keep track of the type of skin file being parsed,
in case a tag needs this info.
E.g. %Lt should be ignored in any skin other than
SBS files.
Change-Id: Ib7e52c3e6810196cb566adb65619a1b847cf20ef
If volume was set as one of the Quickscreen items,
the value wasn't updated when pressing ACTION_QS_VOLUP
or -DOWN.
Change-Id: Ie6531535745592d7b53006560f1db8c5b7dbfb97
For each setting adjustment, the whole QS was
redrawn, including icons that never change at
all. Only redraw the viewports that contain a
setting that has been adjusted.
Change-Id: I74188fbf382a92c6e8bf517d9518c3a96bdd21ef
Reduces GNU Complexity score from 6 to 2.
Slightly adjusts behavior:
1) With TIMEOUT_NOBLOCK and peak meters enabled,
skin_wait_for_action always returned BUTTON_NONE,
and did nothing else. Presumably unintentional.
WPS was not affected, since it always uses HZ/5 for the
timeout. The FM screen uses TIMEOUT_NOBLOCK only when
fms_do_button_loop is called with update_screen == true.
skin_wait_for_action now returns the result of get_action
in any given scenario.
2) fixes incorrect next_refresh calculation when peak_meters
are enabled on multiple screens
3) button loop now refreshes peak meters when
current_tick >= next_refresh, instead of when
current_tick > next_refresh
Change-Id: Iaca37dbdde6057f593659b2feb97b61ac4cc4b02
The splash contrast workaround for the iPod reFresh themes compares
foreground and background colours against hard-coded RGB565 values.
This prevents the workaround from being applied on targets using other
pixel formats, such as XRGB8888 hosted targets.
Use LCD_RGBPACK() and SCREEN_COLOR_TO_NATIVE() to obtain the equivalent
colours for the active screen instead.
Code change and commit message generated by GPT-5.6 Sol. Compiled on
my hosted Eros Q build and confirmed working correctly.
Change-Id: Id15669bc7b8cec11bd4ee645c0b671db4499d2cd
Quickscreen will ignore update_delay so that the SBS
is updated after each button press, without any lag.
The SBS may display settings that are adjusted by the
Quickscreen (e.g. cabbiev2's Shuffle and Repeat icons,
or the brightness slider included in themes like
Adwaitapod and Themify).
Change-Id: I28716e81cb77e235eb009bff91c96f510365f435
Appears to be a regression introduced in e454a39, where
MIN_LINES was increased from 4 to 5, along with changing
nb_lines <= MIN_LINES to nb_lines < MIN_LINES
The top and bottom sections are supposed to switch
from 2 to 1 lines if there are fewer available lines
than MIN_LINES.
Each of the three vertical section uses two lines,
resulting in overlapping viewports, if there are exactly
5 available lines.
Icons mentioned in the comment don't really play into
that.
Change-Id: I3a0e921d9f53a490fece0ce59457feaf84a80d3b
HibyOS-based target: keymaps, LED, powermgmt, bootloader and sim support,
plus cabbiev2 for the new 360x640x16 screen. Opus 5 helped w/ debugging
and the initial scaffolding.
Updated name to FB_STRIDE_MISMATCH, added simulator bmp and specs.
Change-Id: If797ac6581cf75d9d1fcf36e615ee03cf6f905d6
Tune accel/decel/press coefficients and add a braking force which
kicks in when swiping in the opposite direction of scrolling. This
is instead of the usual acceleration force.
Change-Id: I2b220c98674933a6957d6982020406342cd019bd
Add configurable acceleration settings. There are 3 settings which
are applied at different times during scrolling. "accel" is used to
calculate the acceleration applied to the list based on the swipe
speed. "decel" determines the deceleration force applied based on
the list scroll speed, and "press" is an additional deceleration
force applied if you are pressing on the screen.
All settings have the general form:
kinetic scroll accel: <a0> <a1> <delay>
kinetic scroll decel: <a0> <a1> <delay>
kinetic scroll press: <a0> <a1> <delay>
where the formula for the acceleration is "accel = a0 + a1*vel" and
"vel" is the input velocity (swipe speed for accel, list scroll speed
for decel/press).
The delay parameter is a value in milliseconds which acts as a grace
period where the acceleration will *not* be applied. For example, if
you specify 250ms for decel, then deceleration will not kick in until
250ms after scrolling starts. For press, the delay is based on the
duration of the touchscreen press.
All settings have sane default values and don't need to be configured
to enable kinetic scrolling; it is always enabled. But the settings are
there for those who want to tweak the behavior.
Change-Id: I9723b496b2b5d3fb3643af60b169754fdba497f0
Add a low-overhead detector for flick gestures, which are quick
swiping motions from the screen edges.
Change-Id: I3ef2dad328fdf566923575d437376e100a2ab8df
Kinetic scrolling now accelerates when repeatedly swiping over
the screen, so you can scroll through large lists easily without
using the scrollbar. Press & hold to slow down and stop.
Menu items can no longer be selected during a kinetic scroll
event, to reduce the chance of accidental selections.
Change-Id: I05b7d5fe6681a9edf53096b1fa265442fb31bf33
Debug -> USB Serial calls usb_core_enable_driver(USB_DRIVER_SERIAL, ...), which sets a flag inside usb_core. usb_core_init() clears every driver's enabled flag on each connect and runs after the toggle, so the choice is gone before any descriptor is built: the menu reports the new state and nothing changes.
Hold the setting in firmware/usb.c and reapply it from usb_configure_drivers() on each connect, which is where the other drivers are already configured. usb_set_serial()/usb_get_serial() sit alongside usb_set_hid(), which works this way for the same reason.
toggle_usb_core_driver() goes with it: toggle_usb_serial() was its only
caller, and a generic wrapper around a call that cannot persist is not worth keeping.
Affects any target building USB_ENABLE_SERIAL.
Change-Id: I171a532d23cc9cf0efe0a01c2836b69846333a4d
Co-Authored-By: Claude Opus 4.8
- makes SOURCE_DATE_EPOCH affect BUILDDATE and version string
- makes wpsbuild.pl output deterministic
- omits unnecessary extended metadata from zip files
- runs strip-nondeterminism on zip files if REPRODUCIBLE_ZIP is set
Change-Id: I1617e3f5233b2bc356fcfa6457be1a7785c303f9
iap-serial was hardcoded to return "ROCKBOX", and it was
not implemented at all in iap-usb.
Extend the iap-serial implementation to return the contents of
<ROCKBOX_DIR>/playername.txt, or "Rockbox" if there is an error
opening/reading that file.
And cut-n-paste this into the iap-usb side of things
Change-Id: I9d328be390b4cc8bd92237f996c41ef1e5e19724
Decode the jack remote's play/pause and volume buttons via the
"Mikey" controller (I2C 0x72) and report them as multimedia keys so
they work on every screen, like the OF. Protocol reverse engineered
on-device, notes in mikey-6g.c.
Change-Id: If5f3d3abf043c0ce0d8ca7beb0f4b591e41c5c43
* Moldavian (Mihai Alexandru Vasiliu)
* Romanian (Mihai Alexandru Vasiliu)
* Simplified Chinese (Wang Ji)
Change-Id: I586102fc47999667dec959f9f846ddd10061ad5f
iAP accessories that query the track information via mode3/mode4 result
in a call to get_metatada(). This routinely overlows the current 6KB
thread stack into the iAP RX buffer, possibly corrupting the current iAP
packet being received/processed. Bumping this to 8K should yield over
1K of headroom.
(The tagcache scanning thread uses a 16KB stack in comparison)
Inspired by commit 99b21cd6c on the rockpod fork. (Nux Li)
Change-Id: Ibe997f3ae9dab2dcc2d9947f0b49d206a5b006b6
Allows any EQ band to be set to any of Low Shelf, Peak, or High Shelf, instead of hardcoding the types per band.
Change-Id: I470ab916359092ba465e7b6331baed3bf11b2fc9
use require "audio_status" to use the new AUDIO_STATUS_ defines
use require "file_attrs" to use the new FILE_ATTR_ defines
Change-Id: If0b3b612e92e9e5b361a9487ccca2d40f79a953e
Fixes possible crash during playback with
'Auto-Change Directory' setting enabled.
When the currently playing directory changes, the
skin may be updated on the main thread while the
playback thread is executing create_and_play_dir
and has yet to add any indices to the newly created
playlist.
Introduced in commit 41d5ca3.
Change-Id: I6e930f2db546c7690b362ba8c1a4907d0348ff52
Introduce the generic, target-agnostic pieces for a gadget-driven USB
Audio Class DAC, gated by the HAVE_HOST_USB_AUDIO target flag so they stay
inert unless a target opts in.
Rather than adding a new USB mode, reuse the existing usb_audio setting
(never / always / while charge-only / while mass-storage) with its
LANG_USB_DAC string, usb_set_audio() callback and the
PCM_MIXER_CHAN_USBAUDIO mixer channel. HAVE_HOST_USB_AUDIO becomes the
umbrella capability flag for this common code; USB_ENABLE_AUDIO stays the
native usbstack class-driver contract (which needs HAVE_USBSTACK and so
cannot be used by hosted ports whose kernel owns the USB controller).
usb_set_audio() is declared here and implemented by the target (natively
by the usbstack driver, or in the hosted port for gadget targets, as with
usb_audio_get_active()), and applied at settings load. The playback
interlock in wps.c/playback.c keeps local playback from mixing with host
audio while the DAC is active. Simulator stubs for usb_set_audio() and
usb_audio_get_active() keep sim builds linking.
Co-Authored-By: Claude Opus 4.8
Change-Id: I5b7738508c24721d91d4c32379102a1ac7c6228b
Wipe the PCM buffer when starting playback from a paused state.
This prevents unwanted crossfade when manually pausing and then
selecting a new track.
Change-Id: I55e21004c12a2cd67417b627d471e3da115b7077
when browsing the filename gets cut off due to the
length of the parent path
Instead strip the parent from the beginning for files
Change-Id: Ib9dadffabced89b5895420cb696227ca8cc444a2
get_files(path, recurse, finddir, findfile, sort_by, cancel_fn, f_t, d_t)
get_files returns a sorted tables of directories and (another) of files
path is the starting path; recurse == false.. only that path will be searched
findfile & finddir are definable search functions
if not defined all files/dirs are returned if false is passed.. none
or you can provide your own function
sort_by can be by "name" "size" "date" or "none" to perform no sorting
note: for "size" and "date" you may need to strip the attribute data to use
the returned filename
cancel_fn if not defined or not a function no user cancel otherwise supply
your own cancel function which returns true to cancel searching for files
f_t and d_t allow you to pass your own tables for re-use but isn't necessary
Change-Id: Ic4c2ad9c9b5abeeeeaf572880edbc8873d52066b
