len0rd/FreeRTOS-Kernel
1
0
Fork 0
mirror of https://github.com/FreeRTOS/FreeRTOS-Kernel.git synced 2025-10-17 18:27:47 -04:00
Code Issues Projects Releases Packages Wiki Activity
FreeRTOS-Kernel/FreeRTOS/Demo/RISC-V_RV64_PolarFire_SoftConsole/README.md
Gaurav-Aggarwal-AWS 008affa7bf
Add demo project for Polarfire board (#679) 
Add the demo project for PolarFire SoC

Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
2021-09-02 14:02:46 -07:00

750 B
Raw Blame History

UART configuration

On connecting Icicle kit J11 to the host PC, you should see four COM port interfaces connected. This example project uses MMUART0. To use this project the host PC must connect to the COM port interface0 using a terminal emulator such as HyperTerminal or PuTTY configured as follows:

  • 115200 baud.
  • 8 data bits.
  • 1 stop bit.
  • no parity.
  • no flow control.

Target hardware

This example project is targeted at the Icicle kit. Details are available at the following link: https://www.microsemi.com/existing-parts/parts/152514

SoftConsole details

SoftConsole version used to test this project is available at link below: https://www.microsemi.com/product-directory/design-tools/4879-softconsole#downloads