mirror of
https://github.com/FreeRTOS/FreeRTOS-Kernel.git
synced 2025-10-22 04:37:49 -04:00
008affa7bf
Add the demo project for PolarFire SoC Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
19 lines
750 B
Markdown
19 lines
750 B
Markdown
## UART configuration
|
|
On connecting Icicle kit J11 to the host PC, you should see four COM port
|
|
interfaces connected. This example project uses MMUART0. To use this
|
|
project the host PC must connect to the COM port interface0 using a terminal
|
|
emulator such as HyperTerminal or PuTTY configured as follows:
|
|
|
|
- 115200 baud.
|
|
- 8 data bits.
|
|
- 1 stop bit.
|
|
- no parity.
|
|
- no flow control.
|
|
|
|
## Target hardware
|
|
This example project is targeted at the Icicle kit.
|
|
Details are available at the following link: https://www.microsemi.com/existing-parts/parts/152514
|
|
|
|
## SoftConsole details
|
|
SoftConsole version used to test this project is available at link below:
|
|
https://www.microsemi.com/product-directory/design-tools/4879-softconsole#downloads
|