| .. |
|
adc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
as3514.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
as3525.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
ata.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata_idle_notify.h
|
Bootloaders don't need idle callbacks.
|
2008-09-23 22:12:21 +00:00 |
|
ata_mmc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio.h
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
audiohw.h
|
Use shorter fields in sound_settings_info struct to save some bytes
|
2008-08-11 13:01:01 +00:00 |
|
backlight.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bidi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bitswap.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
buffer.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button.h
|
Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN
|
2008-08-23 09:46:38 +00:00 |
|
config-c100.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-c200.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-clip.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
config-cowond2.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-creativezv.h
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
config-creativezvm.h
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
config-creativezvm60gb.h
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
config-e200.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-fmrecorder.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-gigabeat-s.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-gigabeat.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-h10.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-h10_5gb.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-h100.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-h120.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-h300.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-hdd1630.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-iaudio7.h
|
IAUDIO67_PAD: Add keymaps for most of the plugins, they are not all tested yet.
|
2008-10-07 16:38:28 +00:00 |
|
config-iaudiom3.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-iaudiom5.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-iaudiox5.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ifp7xx.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-ipod1g2g.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ipod3g.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ipod4g.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ipodcolor.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ipodmini.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ipodmini2g.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ipodnano.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-ipodvideo.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-logikdax.h
|
Change the MODEL_NUMBER for various new ports so that it is unique again.
|
2008-10-02 18:08:41 +00:00 |
|
config-m200.h
|
Fix a couple of factual inaccuracies in the M200 build.
|
2008-10-12 21:14:08 +00:00 |
|
config-meizu-m3.h
|
Change the MODEL_NUMBER for various new ports so that it is unique again.
|
2008-10-02 18:08:41 +00:00 |
|
config-meizu-m6sl.h
|
Change the MODEL_NUMBER for various new ports so that it is unique again.
|
2008-10-02 18:08:41 +00:00 |
|
config-meizu-m6sp.h
|
Change the MODEL_NUMBER for various new ports so that it is unique again.
|
2008-10-02 18:08:41 +00:00 |
|
config-mrobe100.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-mrobe500.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-ondavx747.h
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
config-ondavx767.h
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
config-ondiofm.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-ondiosp.h
|
WPS editor:
|
2008-09-04 14:49:53 +00:00 |
|
config-player.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-recorder.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-recorderv2.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config-sa9200.h
|
Change the MODEL_NUMBER for various new ports so that it is unique again.
|
2008-10-02 18:08:41 +00:00 |
|
config-tpj1022.h
|
add HAVE_DISK_STORAGE, and use that instead of HAVE_FLASH_STORAGE when checking for an actual disk (i.e. related to spindown, skipping,...)
|
2008-10-07 19:37:33 +00:00 |
|
config.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
config_caps.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
cpu.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
debug.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
disk.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
dm320.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ds2411.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_24cxx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.h
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
events.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fat.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fmradio.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fmradio_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
font.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gdb_api.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
generic_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hangul.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hd66789r.h
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
hotswap.h
|
Simplify & fix the MMC driver. After more than 3 years I found that the MMC specs were a bit misleading, and the 'large' MMC which state a block size of 1024 or 2048 bytes and no partial read and/or partial write capability are happily accepting a block size of 512 bytes. So go KISS and remove all the variable/partial block handling code. This fixes the driver for the Transcend 4GB MMCplus, which doesn't cope when we actually set the 2048 byte block size it states. It also makes write operations involving small blocks faster and more reliable. * Note: The 4GB Transcend still doesn't work when plugged at boot, but works when hotplugged.
|
2008-09-14 20:33:24 +00:00 |
|
hwcompat.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-coldfire.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
id3.h
|
FS#9139 - support for ver 1.1 scrobbler log files. Upload any old files first - uploading software may need updating, see the LastFMLog wiki page
|
2008-10-07 18:39:44 +00:00 |
|
ifp_usb_serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
imx31l.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
isp1362.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
isp1583.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
jz4740.h
|
Fix TABs and get rid of HAVE_BUTTON_HOLD
|
2008-10-07 20:23:56 +00:00 |
|
kernel.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-charcell.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-remote.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
led.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ltv350qv.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lv24020lp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
m5636.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mas.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mas35xx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mcf5249.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mcf5250.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mips-archdefs.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mips.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mipsregs.h
|
Onda VX747:
|
2008-08-26 21:48:49 +00:00 |
|
mp3_playback.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mp3data.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mpeg.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
nand_id.h
|
Onda VX747:
|
2008-07-15 17:17:01 +00:00 |
|
panic.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf5060x.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50605.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50606.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm_record.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm_sampr.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pnx0101.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
power.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
powermgmt.h
|
Add rough estimate for iPod 4G power consumption. Probably a little off, but better then using the Archos numbers.
|
2008-08-21 20:01:32 +00:00 |
|
pp5002.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp5020.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp5024.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
profile.h
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
qt1106.h
|
set svn properties
|
2008-09-17 18:50:34 +00:00 |
|
r61509.h
|
Fix the LCD bug!
|
2008-07-16 15:25:35 +00:00 |
|
replaygain.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rolo.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rtc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s1a0903x01.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s3c2440.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s5l8700.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
scroll_engine.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sh7034.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sound.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spdif.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
structec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sw_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
system.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tcc77x.h
|
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
|
2008-09-06 17:50:59 +00:00 |
|
tcc780x.h
|
Add some missed bits + change MODE to TMODE
|
2008-09-22 19:27:21 +00:00 |
|
tea5767.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
thread.h
|
Onda VX747:
|
2008-09-14 16:26:08 +00:00 |
|
timer.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
tlv320.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
tsc2100.h
|
Minor missing #include and static function fixes for mrobe
|
2008-09-10 20:14:22 +00:00 |
|
tuner.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
uda1380.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb-tcc7xx.h
|
Prepare for usb-telechips testing
|
2008-09-22 18:49:37 +00:00 |
|
usb.h
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
usb_ch9.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb_core.h
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
usb_drv.h
|
reorganise the USB stack a bit to allow for easier integration of non-ARC controller drivers
|
2008-10-03 22:43:16 +00:00 |
|
wm8721.h
|
Remove leftover cruft.
|
2008-09-07 18:00:00 +00:00 |
|
wm8731.h
|
Fix deemphasis control bit position.
|
2008-09-09 21:49:28 +00:00 |
|
wm8751.h
|
cleanup some audio driver headers
|
2008-07-02 23:01:21 +00:00 |
|
wm8758.h
|
iPod Video: Fix playback after recording (FS #7402). Implement recording gain adjustment. * Enable timeout for zero-crossing detection (SLOWCLK), avoids hanging volume/ gain due to DC offsets.
|
2008-09-13 19:34:16 +00:00 |
|
wm8975.h
|
iPod G4, Color/Photo and Nano audio driver rework: Fix playback after recording (FS #7402). Implement recording gain adjustment. * Fix slightly off Bass/Treble scale.
|
2008-09-10 23:50:26 +00:00 |
|
wm8978.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
wm8985.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
wmcodec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
142ac2a35a