1
0
Fork 0
forked from len0rd/rockbox
Commit graph

3844 commits

Author SHA1 Message Date
Michael Sevakis
6c8772d6db x5/M5: Finally get rid of filter selection aberrations when switching to 88.2kHz sampling rate which affected both the DAC and ADC. Turning off the DAC and ADC before changing the internal codec frequency seems to cure the remaining glitch of the filters not being correctly selected by the TLV320. Some FIFO reset changes that help keep it stable as well. Supporting 88.2KHz on iAudio has been a tricky ordeal. Also made sure to ok the HW tone controls on iRiver. :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12757 a1c6a512-1295-4272-9138-f99709370657
2007-03-14 10:06:57 +00:00
Michael Sevakis
abf41e3481 H100 Series: Fix FS#6810 - Distortion on Bass/Treble usage. Coldfire PCM needed a refinement in the init sequence for the UDA1380 after audio init changes. Apparently it doesn't like its registers altered before the Coldfire I2S is properly initialized.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12752 a1c6a512-1295-4272-9138-f99709370657
2007-03-13 15:05:46 +00:00
Barry Wardell
7f4f9aead7 Improved ADC driver for AS3514 (used in PP5024 - ie. Sansa e200) based off datasheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12745 a1c6a512-1295-4272-9138-f99709370657
2007-03-13 01:50:13 +00:00
Barry Wardell
9e56b15e80 Fix typo. We only need to keep bit 6 set on HPH_OUT_L. Setting it on HPH_OUT_R does something completely different and probably not wanted.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12743 a1c6a512-1295-4272-9138-f99709370657
2007-03-12 23:48:00 +00:00
Barry Wardell
2370998a87 Disable bootloader messages in the H10 and Sansa bootloaders unless the PLAY (on H10) or RIGHT (on Sansa) button is being held. Messages are still displayed if an error occurs. This has already been implemented for iPod bootloaders, but still needs implementing for the other bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12742 a1c6a512-1295-4272-9138-f99709370657
2007-03-12 22:12:20 +00:00
Nils Wallménius
62dbd97e90 Sorted and updated FILES for both apps and firmware, included features.txt preparing for the lang v2 cleanup, should fix FS# 6805 unless Lear's previous committ got it
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12741 a1c6a512-1295-4272-9138-f99709370657
2007-03-12 21:31:06 +00:00
Magnus Holmgren
9fe79f183f Add missing files (for Archos and iRiver M5) to the source archive.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12739 a1c6a512-1295-4272-9138-f99709370657
2007-03-12 17:42:12 +00:00
Jens Arnold
1b3fc39a65 Make private function static on variable CPU frequency targets. Kill it on fixed frequency targets, regaining 1/3 of the waste on archos...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12731 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 22:27:35 +00:00
Daniel Ankers
e814bb66b3 Enable balance control on Sansa
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12730 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 21:57:46 +00:00
Daniel Ankers
7293da9303 Oops, missed a file from r12727
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12728 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 17:58:14 +00:00
Daniel Ankers
dfad406aa1 Sound for Sansa E200 - based on work by myself, Rene Peinthor, Barry Wardell and Christian Gmeiner from the AS3514 datasheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12727 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 17:38:08 +00:00
Michael Sevakis
e21d217205 Squeeze the serial number code down a few more bytes and call it a day. Will try to reduce by a significant amount later.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12726 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 16:01:01 +00:00
Michael Sevakis
94c4724420 Fix a late error that only let it read at default CPU frequency. Disable interrupts during ds2411 read since it's timing sensitive.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12724 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 14:33:16 +00:00
Michael Sevakis
89a38d4273 iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12723 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 13:59:31 +00:00
Miika Pekkarinen
2eefb5acb8 Optimized the gui list code performance, including automatic frame dropping and cpu boosting when button events are getting queued. Improved scrollwheel acceleration code is needed to notice a real change.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12721 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 10:52:36 +00:00
Michael Sevakis
c2d2106fd7 Audio Init: Just can't stand that heirarchy. Add one level of abstraction. Might come in handy anyhow. Use sound.h instead of the conditional includes for audio hardware headers. If someone doesn't like that, yell at my evil twin. :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12718 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 06:21:43 +00:00
Michael Sevakis
c5cd27f5d1 Pop a stub in there for the e200 until playback is ready. Move it to the proper place at that time.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12717 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 05:48:58 +00:00
Michael Sevakis
5d63776a24 Reenable aynchronous audio init stage. Really just single stage with aynchronous enabling of outputs. Keeps audio_init last so prior init steps can use the audiobuffer in any desired way. Audio will be fully initialized by the time the UI is entered. Playback of voice or audio will be delayed properly until audio hardware is ready.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12714 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 05:04:48 +00:00
Barry Wardell
3631f11fea Fix red builds and make udelay actually work as it should again.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12703 a1c6a512-1295-4272-9138-f99709370657
2007-03-10 12:41:52 +00:00
Barry Wardell
de061e8a30 Make udelay() wrap-safe.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12702 a1c6a512-1295-4272-9138-f99709370657
2007-03-10 12:28:25 +00:00
Michael Sevakis
68f9e1ad57 Guess there were more changes to it.:) Odd that mine built until a make clean.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12694 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 12:51:25 +00:00
Michael Sevakis
98cd3e8868 Install the single stage synchronous audio initialization I cooked up awhile back.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12693 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 12:30:14 +00:00
Michael Sevakis
7e0201558b Back to green?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12690 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 08:17:05 +00:00
Michael Sevakis
178afc9caf As usual I left experimental stuff in a file. Forgot to add that set_irq_level_and_block thread is per core now too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12689 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 08:09:48 +00:00
Michael Sevakis
dee43ece20 Put an end to priority inversion in the ata driver. Gave up trying to have fully atomic dual use mutexes so just replaced the ata driver locking with spins. Maybe I'll have better luck later. Things should run smoothly with database updates and such happening in the background.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12688 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 08:03:18 +00:00
Thom Johansen
99b2742cd0 Use the new DSP callback functionality in firmware/sound.c to deal with SWCODEC stereo width and channel configuration instead of the old more spread out #ifdef based approach. Rename the DSP functions involved for more consistent naming.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12677 a1c6a512-1295-4272-9138-f99709370657
2007-03-07 19:11:16 +00:00
Thom Johansen
2d7bb99c52 Hack around the lack of a hardware prescaler on a number of WM codecs. Bass and treble controls should work on DAPs using these chips now, but will be prone to distort when boosting bass. Gut out UDA1380 code(!!) and switch to high bass cutoff and low treble cutoff in WM8975 driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12673 a1c6a512-1295-4272-9138-f99709370657
2007-03-07 15:00:29 +00:00
Michael Sevakis
633f388002 Coldfire targets: Shuffle IRQ levels around to have all interaction between low level audio function calls and DMA be atomic. Make recording and playback independently startable and stoppable so one can be running and not interfere with the other. All tests I can do at the moment check out ok (play, record, play+record, FM radio on iRivers, S/PDIF on H120 (w/running optical on/off), and on-the-fly samplerate changes). Recording tested for well over an hour run and no problems.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12658 a1c6a512-1295-4272-9138-f99709370657
2007-03-07 06:23:02 +00:00
Michael Sevakis
b425de71df Fix problem with recording screen creep and bag a bigfoot. Voice clips aren't long enough now to untrigger the thread boost that was supposed to be applied to the codec thread. The voice thread was needlessly boosting the codec thread and leaving it boosted which explains the encoders' ability to flood the output buffer when everything else was stopped in its tracks. Check which thread is calling pcmbuf_under_watermark and only initiate the boost when it's the codec thread. Always return the codec thread to its usual priority in pcmbuf_play_stop.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12649 a1c6a512-1295-4272-9138-f99709370657
2007-03-06 20:32:13 +00:00
Jens Arnold
611737bde8 Add extra filtering to the X5 and M5 button drivers to prevent erratic button events (ported from H300).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12627 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 20:14:41 +00:00
Michael Sevakis
3d4d5175b0 Forgot that too...hrmph.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12621 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 08:34:30 +00:00
Linus Nielsen Feltzing
e06faa0480 Use a larger font cache on the targets that can afford the (quite small) RAM usage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12620 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 08:32:35 +00:00
Michael Sevakis
8867d00141 More catching up on old work. Refine audio interface setup on Coldfire. Stop the funky glitching on the iAudio stuff when starting recording esp. at 88.2kHz. (probably due to the bidi interface). iRivers don't seem to care what you do. TLV320 still seems to have a little trouble selecting it's filters correctly for 88.2kHz or it could be some odd phasing effect. Get rid of the horrible reset parameter in pcm_apply_settings as it can decide for itself.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12618 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 08:14:27 +00:00
Jens Arnold
8d0cd9f303 Some more M5 adjustments.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12616 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 01:31:26 +00:00
Jens Arnold
1d232401fd Forget to commit this one deleted file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12611 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:13:46 +00:00
Jens Arnold
8876018d25 Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
Daniel Ankers
ee07215d50 Fix RoLo on PortalPlayer targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12609 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 23:53:38 +00:00
Michael Sevakis
198772a6b2 iRiver H100 series: Catching up on old work. Use a better way to keep playback going when switching optical output. Doesn't mess with the DMA peripheral requests to do it like before but just writes a sample to the FIFO. Would really like to reformulate interrupt scheme on Coldfire to allow DMA interrupts to be blocked specifically but not normally.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12605 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 21:43:35 +00:00
Daniel Ankers
82f9056988 Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12601 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 20:06:41 +00:00
Barry Wardell
38b64f7b4b Get rid of C99 style variable declaration. Also, add one more use of #define instead of inl/outl that I missed last time.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12591 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 16:06:54 +00:00
Jens Arnold
b4994a08ca Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
Barry Wardell
169ebdbda7 Some more replacing of inl/outl with register #define's (doesn't change end-result binary). Add lots more #define's based on the ipodlinux wiki and some extrapolation.
Also add PortalPlayer SoC version to the HW info debug screen.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12575 a1c6a512-1295-4272-9138-f99709370657
2007-03-03 23:37:17 +00:00
Barry Wardell
8b061252c4 Replace some inl/outl with register #define's instead. Also tidy up pp5020.h so that it's in increasing address order.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12574 a1c6a512-1295-4272-9138-f99709370657
2007-03-03 17:25:20 +00:00
Robert Kukla
ae08eeb4ff remove runtime detection of h1x0 series RTC MOD, but leave driver code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12554 a1c6a512-1295-4272-9138-f99709370657
2007-03-03 00:11:20 +00:00
Robert Kukla
79a2a936a2 remove numerical genre and use genre_string consistently:
- fix spurious display of "blues" genre for missing genre tag 
- simplify code/use less code
- numerical->string conversion only once instead of at every use

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12552 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 21:49:42 +00:00
Jens Arnold
2187e815e2 Fix SH1 debug builds.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12551 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 20:03:41 +00:00
Linus Nielsen Feltzing
8448d3b6be H300 bootloader: init the ISP1362 chip, and set the CPU to idle mode while charging, to save power
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12547 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 13:04:57 +00:00
Linus Nielsen Feltzing
ff17905d7c H300 bootloader: (Work in progress) Boot Rockbox on RTC alarm, add charging screen, move to a separate source file, backlight is on during USB mode (again)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12546 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 11:28:23 +00:00
Jonathan Gordon
9fae76d939 Use the browse button for A-B instead of quickscreen button. Files are
still accessable through the Rockbox Menu 


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12545 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 00:37:03 +00:00
Jonathan Gordon
3391ede940 enable A-B mode on the X5. Uses the quickscreen button to set points
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12543 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 00:16:41 +00:00