Rockbox Utility doesn't support "proxy auto-config" (aka PAC) for system proxy
settings. This can result in users selecting system proxy and expecting it to
work even if their system uses PAC. While the configuration dialog displays the
proxy setting values retrieved from the system this is not totally obvious. Add
a message telling if the retrieved system proxy values are not useable. For now
this only checks if a proxy host and port are set which should catch the usual
cases when PAC is used.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25435 a1c6a512-1295-4272-9138-f99709370657
Don't listen to requestFinished() signals for background downloads. The
only information needed is the done() signal. Fixes multiple error
messages popping up on unreachable network.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25430 a1c6a512-1295-4272-9138-f99709370657
Select (B)ootchart in advanced options in configure, and logf will record timings for various stages of boot, for performance comparisons. Format logged is:
BC:>function_name,123,80
where 123 is the line number, 80 is the number of ticks since boot. This can be loaded as CSV into a spreadsheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25426 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
the arm926-ejs doesn't have synchronous/asynchronous/fastbus modes, so
just change CGU_PROC directly
Note: we could use a lower unboosted frequency now
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25417 a1c6a512-1295-4272-9138-f99709370657
Write the setting before enabling the PLL
Fix booting problem (black screen) with Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25415 a1c6a512-1295-4272-9138-f99709370657
Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot
Tested on fuzev1/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
This adds the Beast as disabled target. Note that bootloader installation isn't
implemented yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25412 a1c6a512-1295-4272-9138-f99709370657
The keymap of recscreen needs serious work, and apparently there are
other bugs in the settings keymap.
See conversation at http://www.rockbox.org/irc/log-20100331#03:51:25
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25406 a1c6a512-1295-4272-9138-f99709370657
They're all the same when charger is unplugged, but when it's plugged:
- BVDD is way too high
- RTCSUP oscillates between 2 values
- CHG_IN acts like RTCSUP on some models but seems to works fine on my Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25405 a1c6a512-1295-4272-9138-f99709370657
Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517
Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only
Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
Create a svg version of the clef icon for Rockbox Utility and set it as window
icon on Linux; icon created from the svg logo in the manual. Addresses
FS#11094.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25385 a1c6a512-1295-4272-9138-f99709370657
