M-profile cores manage interrupts differently from classic cores
and lack the FIQ. Split the interrupt management parts out into
separate headers but keep the endian swapping routines (which are
not profile-dependent) in the common system-arm header.
The initial part of the vector table is common to all Cortex-M
CPUs and is intended to be included by the target linker script,
with the vendor-specific part of the vector table appended to it.
Change-Id: Ib2ad5b9dc41db27940e39033cfef4308923db66d
ARMv7-M has hardware division, so it doesn't require __div0
or any support functions for 32-bit division.
Change-Id: I840683a1a77d737f378899ca4bcf858216b81014
If I'm interpreting the git history correctly,
the config file for Zen Vision was at some point
inadvertently replaced with one for the
Zen Vision:M.
This deletes the currently unused creativezv.h,
and moves its contents into zenvision.h.
The config files appear to be identical except for
CREATIVE_ZV vs CREATIVE_ZVM define, different
keypads (CREATIVEZVM_PAD vs CREATIVEZV_PAD) and
BOOTFILE_EXT (zv vs zvm), a different model name
and number, as well as different LCD dimensions
and DPI.
The buttonmap still seems to require adjustment.
Change-Id: I9a5e65df750db21be5f5a1ed7a80a50706237781
Due to its similarity with S5L8702, clickwheel support and sleep can be used as-is on S5L8720. DRAM and IRAM are also configured.
Change-Id: I52f8a3417e6a25c7360b1cae2fb5eed621e2e0db
They were never finished, never saw any release ever, and haven't
compiled for the better part of a decade. Given their HW capabilities [1],
they are not worth trying to fix.
[1] 1-2MB RAM, ~256MB onboard flash, no expandability
Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
The right thing here probably to just not bother at all, as this
bootloader can't launch rockbox yet anyway.
Change-Id: I62bd22353b6adc9dbe35b94f3b60a6a67348356a
This dir is suitable for stuff that doesn't fit the target tree, e.g. because
it also builds on hosted or otherwise. It also has a generic subfolder for
fallback C implementations so that not all archs need to provide asm files.
SOURCES should only contain "foo.c" where foo.c includes the specific
<arch>/foo.c files from the subdirs using the preprocessor. This way automatic
selection of asm versions or generic C verion is possible.
For the start, the thread support files are moved, since ASM threads can
be used on hosted platforms as well. Since core_sleep() remains platform
specific it's moved to the corresponding system.h headers.
Change-Id: Iebff272f3407a6eaafeb7656ceb0ae9eca3f7cb9
Mostly for the sake of reducing latency for audio servicing where other service
routines can take a long time to complete, leading to occasional drops of a
few samples, especially in recording, where they are fairly frequent.
One mystery that remains is GPIOA IRQ being interrupted causes strange
undefined instruction exceptions, most easily produced on my Fuze V2 with a
scrollwheel. Making GPIOA the top ISR for now, thus not interruptible, cures it.
SVC mode is used during the actual calls. Hopefully the SVC stack size is
sufficient. Prologue and epilogue code only uses the IRQ stack and is large
enough.
Any routine code that should not be interrupted should disable IRQ itself from
here on in.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31642 a1c6a512-1295-4272-9138-f99709370657
- two essential parts of Sansa AMS drivers are optimzed away in newer gcc, so mark them volatile.
- use "r" instead of "i" (which is apparently invalid syntax) for the input list in some inline assembly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23634 a1c6a512-1295-4272-9138-f99709370657
