has made it more reliable. It seems to basically work now, but
somehow when Linux tries to read the partition table and it gets the
"scsi read10" command, the storage_read_sectors(drive=0, start=0, count=8)
call never returns...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26894 a1c6a512-1295-4272-9138-f99709370657
Gets a bit more battery life
Adjust current usage, it was a bit too low for Clipv2/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26866 a1c6a512-1295-4272-9138-f99709370657
This fix adds one nop instruction per loop (there were 3 before) and so i2c will be slightly slower, but this hardly a problem.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26850 a1c6a512-1295-4272-9138-f99709370657
Fix the asm constraints to mark the left output variable as earlyclobber
Thanks to amiconn
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26777 a1c6a512-1295-4272-9138-f99709370657
FIQ/IRQ handlers can't be built with -mthumb, and the thumb case was
buggy anyway (spotted by jhMikeS) : pc offset hadn't been adjusted
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26765 a1c6a512-1295-4272-9138-f99709370657
When building with eabi gcc, 2 variables are assigned the same register
This might be a bug in the constraints, but it's just simpler to use C,
even at the cost of 1 cycle per loop
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26761 a1c6a512-1295-4272-9138-f99709370657
We can't pop into pc on ARMv4t when using thumb: the T bit won't be
modified if we are returning to a thumb function
Code running on ARMv4t should use the new ldrpc / ldmpc macros instead
of ldr pc, [sp], #4 and ldm(cond) sp!, {regs, pc}
No modification on pure ARM builds and ARMv5+
Note: USE_THUMB is currently never defined, no targets can currently be
built with -mthumb, see FS#6734
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26756 a1c6a512-1295-4272-9138-f99709370657
preventing the DMA callback to advance in the recording buffer is not
enough in pcm_rec_dma_get_peak_buffer()
we need to prevent it interrupting us while we are copying the left
channel data into the right channel
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26663 a1c6a512-1295-4272-9138-f99709370657
Fix panics when deleting large files from µSD
Tested on problematic Transcend 4GB Class 6
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26631 a1c6a512-1295-4272-9138-f99709370657
This adds proper full speed charging support for iPod 4G, Color, Mini 1G, Mini 2G, Nano 1G, and Video. Nano 2G already has support, so now all ipods charge (except 1G-3G whose hardware doesn't support USB charging).
USB charging defaults to on, but will only charge at full speed from a USB host. To charge from an AC charger, you need to set the USB charging mode to "force". It may be possible to detect AC chargers in a future version, at least on some models.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26626 a1c6a512-1295-4272-9138-f99709370657
keypad.
Copyright is restored for each keymap according to git blame.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26615 a1c6a512-1295-4272-9138-f99709370657
1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.
2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.
3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.
4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.
No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
