This event is sent before the audio is routed back to the speaker so we
get the information about the unplugged headphone notably earlier.
Decrease the debouncing of the headphone status from 1s to 0.5s to work
around audio still getting played back via the speaker due to the pause
delay by debouncing. On Android we shouldn't need the debouncing at all.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29957 a1c6a512-1295-4272-9138-f99709370657
per seconds apparently don't very well.
Not sure if it's the hardware or our threading that doesn't play well enough
here (UI isn't less response despite of the audio drop outs).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28144 a1c6a512-1295-4272-9138-f99709370657
* Until BUTTON_REPEAT was started, coordinate changes were not exposed. Change
that (post on every coordinate change) so that wiping over the screen does actually
something between the first touch and BUTTON_REPEAT
* Once BUTTON_REPEAT is active, further repeats are posted in an acceleration
fashion (slow at the begginning), which smoothes list scrolling. But this has
the contrary effect on touchscreen, as it makes swiping appear very laggy. So,
remove that acceleration for touchscreen and make it equally fast at all times
so the scrollbar is better usable.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28143 a1c6a512-1295-4272-9138-f99709370657
This doesn't change the value with the current HZ=100,
but makes it easy to change HZ in custome builds and still have buttons be usable
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28086 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
- Revert renaming of button_set_flip()
- Moved rtl flipping logic to apps/actions.c as a static function
- Joined rtl_button_flip_needed() and button_flip_horizontally()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22962 a1c6a512-1295-4272-9138-f99709370657
Instead, implement it more as a target driver with button_read_device(), button_init_device() and button_hold(), then use the normal button driver from firmware/drivers/button.c.
Fixes FS#10451 ("backlight off on hold doesn't function properly").
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22799 a1c6a512-1295-4272-9138-f99709370657
%T|x|y|width|height|action| <- setup a region (relative to the current viewport) where if pressed the "action" will be done (currently play/stop/prev/next/menu/browse work, suggestions for others to add and better names welcome)
%Tl<timeout> <- used as a conditional to say if the touchscreen was touched in the last <timeout>, use this to enable/disable button viewports or something... same syntax as other timeout tags
cabbiev2 for the mr500 has been modified to demonstrate the new tags. press the pause/play button to pause playback. press the rockbox logo to get back to the menu. pretty icons needed to make this more usable :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20753 a1c6a512-1295-4272-9138-f99709370657
HAVE_SCROLLWHEEL plainly indicates the existence of a scrollwheel, thus all ipods define it now (in addition to the ones and some
sansas which did before). Same applies to the manual.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20177 a1c6a512-1295-4272-9138-f99709370657
viewport_Set_defaults() will setup the given viewport with the correct "full screen" dimensions (so start at 0,0 if statusbars are disabled or 0,8 if they are enabled.)
All screens should keep the statusbar enabled, but if you really want to ignore the user setting you can disbaled it with viewportmanager_set_statusbar(false).
This commit also includes some menu/list viewport cleanups from kugel in FS#9603
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19622 a1c6a512-1295-4272-9138-f99709370657
Changes to button driver: HAVE_BUTTON_DATA targets pass the button data straight back in the button_read_device() call
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15262 a1c6a512-1295-4272-9138-f99709370657
by John S. Gwynne & Brian J. Morey
This should stop the patch from breaking again and give them opportunity to improve it further.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15052 a1c6a512-1295-4272-9138-f99709370657
