Robin Howard
29c92b3997
case (drawing): Back dimensions for lip gaps; more Face dimensioning.
2024-05-27 03:20:07 +10:00
Robin Howard
286cfb1b6d
case (drawing): Pulls in Daniel's SD Caddy drawing, makes juliaaa suggested edits.
2024-05-26 01:45:24 +10:00
Robin Howard
7171716a9c
case (drawing): Dimensioning for the button+switch pockets on both Back and Face sides; more dimensioning for the front view, plus TRS detail views.
2024-05-26 00:28:03 +10:00
Robin Howard
c7be30e96a
case (model+drawing): Fix TRS cutout (slightly too high); further work on the Face drawing.
2024-05-24 22:36:43 +10:00
Robin Howard
80f18a62e9
case (drawing): Face sections, ahead of TRS fix and swapping section A + C directions.
2024-05-24 21:19:29 +10:00
Robin Howard
526b7f1c62
case: Adds the SD card blank so we can figure out if the SD Caddy ...
...
... is thick enough to sit flush with the case, and positions the Caddy
so it's on the end of said card.
2024-05-24 14:53:16 +10:00
Robin Howard
0b8d3341d4
case (drawing): Sets up techdraw pages w/ standard notes for us to add drawings to.
2024-05-24 13:04:36 +10:00
Robin Howard
bf7eddb599
case (drawing): Finish up with page 2 (case back), after redoing the left -hand side and following up on some feedback from Erin.
2024-05-23 16:13:18 +10:00
Robin Howard
d48a69605b
case (drawing): screwhole corner detail, tolerance adjustment.
2024-05-22 05:02:10 +10:00
Robin Howard
a308595801
case (drawing): Updates dimensions to match fillet changes, adds tolerance for lip rail, changes scale to 1:1 for ease, adds redone section + detail for USB.
2024-05-21 02:54:03 +10:00
Robin Howard
08198e636b
case: Organises sketches, and has USB and TRS fillets use round numbers for dimensions and angles (ie. going off-model compared to Fusion) for ease off machining etc.
2024-05-20 16:53:16 +10:00
Robin Howard
dd32931ff1
case (drawings): Switches overview arrows, adds USB profile section Detail.
2024-05-20 01:43:28 +10:00
Robin Howard
7840a977cf
case: Hasbutton pocket length+width, switch pocket length+width, switch cutout width, screen retainer length+width and touchpad retainer length+width respect Params.All_HoriClearance, to avoid another Chisel Incident.
2024-05-19 18:11:44 +10:00
Robin Howard
d7c5e5328a
case: Removes remaining dependencies on Fasteners workbench.
2024-05-18 01:54:25 +10:00
Robin Howard
51f1724298
case (drawings): Less confusing overview arrangement. Rearrangement of Back page. Detail for TRS profile.
2024-05-18 01:46:24 +10:00
Robin Howard
cb155b5a71
case: Corrects PCB clearance value. Puts techdraw objects into a state that doesn't break when you change anything. Starts the techdraw assembly line switchover.
2024-05-16 14:59:39 +10:00
Robin Howard
df2a752560
case: Corrects USB fillet (~2mm min raddius), updates tech drawing, re-exports STEP files.
2024-05-14 16:29:02 +10:00
Robin Howard
3dd3be5f10
case: Committing the (hopefully finalised) case model checkpoint, with a WIP drawing for CNC, and a few sample exports. I suspect we will be wanting to restart the versioning again shortly, eg. treat this as v0.4, or v1 if it goes to production.
2024-05-13 05:27:01 +10:00
Robin Howard
bc5c752f90
case: Increases touchpad cutout chamfer, decreases hole size by 0.1mm in an effort to avoid the screw ends colliding
2024-05-13 05:27:01 +10:00
Robin Howard
dae6dc9d64
case: Brings back-case rail into line with Fusion model.
2024-05-13 05:27:01 +10:00
Robin Howard
876a098c92
case: Adds missing extra chamfer on the lip of the TRS fillet.
2024-05-13 05:27:01 +10:00
Robin Howard
368acf72cd
case: Techdraw template. Bring rails into line with Fusion model.
2024-05-13 05:27:01 +10:00
Robin Howard
2644022622
case: Adds slot to switch, adds follow of Erin's initial tech drawing.
2024-05-13 05:27:01 +10:00
Robin Howard
2901ae2085
case: Adds case lip pocket, fixes USB fillet. (TODO: Remove UsbFilletOutlineSketch; it is no longer needed.)
2024-05-13 05:27:01 +10:00
Robin Howard
ca2e78a38e
case: Adds SD Card caddy and corresponding cutout.
2024-05-13 05:27:01 +10:00
Robin Howard
cdd9d16970
case: Adds example tech drawing, corrects face+back outer chamfer.
2024-05-13 05:27:01 +10:00
Robin Howard
984dbc0b22
case: Front-case pockets and cutouts (screen and touchpad).
2024-05-13 05:27:01 +10:00
Robin Howard
c334f67da0
case: USB, TRS, Button and Switch cutouts, fillets and pockets. USB needs a fix though.
2024-05-13 05:27:01 +10:00
Robin Howard
ad83ed83b8
case: Checkpoint before destructive cleanup of extra USB-related sketches.
2024-05-13 05:27:01 +10:00
Robin Howard
e54c5cd7d5
case: Completes case-face cutout and pocket sketches, and revisits the face-side inner switch pocket now that we have the screen retainer to reference from.
2024-05-13 05:27:01 +10:00
Robin Howard
ea81453305
case: Nudge the SD Card Reader component 0.1mm down / towards the USB port, to match IRL measurements.
2024-05-13 05:27:01 +10:00
Robin Howard
f130c4733b
case: Adds start of case-front screen cutout sketches.
2024-05-13 05:27:01 +10:00
Robin Howard
9ef607a958
case: Adds lip/rail to the case back; this still needs insetting by ~0.1mm
2024-05-13 05:27:01 +10:00
Robin Howard
2837fd93c4
case: Bring USB port cutout + fillet into line with Fusion model.
...
(A smidge downwards [0.2mm] compared to my initial guess.)
2024-05-13 05:27:01 +10:00
Robin Howard
abd669c220
case: Finished switch, cleaned up naming of in-freecad reference models to aid further debugging, eg. stopping me from accidentally relying on old case position for case fittings.
2024-05-13 05:27:01 +10:00
Robin Howard
d07400b301
case: Back switch pocket startings, switch sketches + base extrudes. (Pocket depends on switch sketches, hence the weird order.)
2024-05-13 05:27:01 +10:00
Robin Howard
7e3a8b2c85
case: Fixes the button pocket fillets so they're in parity with the Fusion model.
2024-05-13 05:27:01 +10:00
Robin Howard
a703b6b17d
case: Makes buttons + the button pocket match the new 5.6mm depth in the Fusion model.
...
(Still TODO: make the pocket fillet match; it extends a little further
downward than in this model.)
2024-05-13 05:27:01 +10:00
Robin Howard
7d12ab00cf
case: Minor tweak to make sure the travel offset for the button is applied properly.
2024-05-13 05:27:01 +10:00
Robin Howard
e788510b06
case: Adds the second button, switching to a different approach for positioning:
...
(ignoring sketch attachment, and having the body itself use DatumLine
Placement.Body.??? properties for its own placement. It means we can use
Clone for the second button and position it relative to the first (again
using the Placement properties for Button2's DatumLine to determine the
relative position), without having to try to figure out how to have
different sketch attachments, or needing to recreate the second button
entirely from cloned sketch upwards.
2024-05-13 05:27:01 +10:00
Robin Howard
991e0adeab
case: Adds a rudimentary battery cage / button jig, and scaled-for-the-old-pocket-depth Button.
2024-05-13 05:27:01 +10:00
Robin Howard
18443b8a6b
case: Checkpoint, foundation for battery cage work.
2024-05-13 05:27:00 +10:00
Robin Howard
e4fc35ce19
case: Porting the Fusion360 case back into FreeCAD, starting with the back/bottom half.
2024-05-13 05:26:45 +10:00
