Jack Halpin fefafebed6 SansaAMS: Disable voltage scaling. ... Voltage scaling seems to be causing various problems mostly related to issues with the uSD cards. The increased runtime benefit only amounts to ~30 minutes as currently implemented so it seems prudent to disable it once again at this time. We still don't understand why the core voltage being lowered would impact the uSD card but in fact it does. The internal cards do not seem to have problems. I have simply #ifdef'd the voltage scaling code with HAVE_ADJUSTABLE_CPU_VOLTAGE so if you want to use voltage scaling simply define that and the voltage scaling code should run. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24217 a1c6a512-1295-4272-9138-f99709370657		2010-01-12 23:56:59 +00:00
..
sansa-c200v2	Fix svn:keywords property in as3525 target tree	2010-01-10 14:53:53 +00:00
sansa-clip	Clivp2: Fix typo when applying FS#10047	2010-01-08 08:11:50 +00:00
sansa-clipv2	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
sansa-e200v2	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
sansa-fuze	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
sansa-m200v4	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
adc-target.h	Sansa AMS: use the AS3514 ADC driver	2008-11-10 20:55:56 +00:00
app.lds	FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up	2009-06-08 23:05:33 +00:00
ascodec-as3525.c	Sansa AMS : don't use the SHAREDBSS_ATTR since we don't have a coprocessor	2009-06-02 22:45:02 +00:00
ascodec-target.h	FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.	2009-06-30 17:56:21 +00:00
ata_sd_as3525.c	SansaAMS: Disable voltage scaling.	2010-01-12 23:56:59 +00:00
audio-as3525.c	Sansa AMS recording support (Microphone and FM)	2009-11-01 22:51:31 +00:00
backlight-e200v2-fuze.c	FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)	2009-06-18 22:33:02 +00:00
boot.lds	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
button-e200v2-fuze.c	Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)	2010-01-06 23:41:36 +00:00
clock-target.h	Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)	2010-01-10 14:24:45 +00:00
dbop-as3525.c	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
dbop-as3525.h	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
debug-as3525.c	Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)	2010-01-06 23:41:36 +00:00
debug-target.h	Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver	2009-02-17 02:36:48 +00:00
dma-pl081.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
dma-target.h	Sansa AMS : use SD controller status to notify end of data transfer	2009-01-08 08:27:42 +00:00
fmradio-i2c-as3525.c	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
i2s-as3525.c	Fix Clip firmware building by adding missing symbols	2008-11-10 11:04:43 +00:00
kernel-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
lcd-as-e200v2-fuze.S	Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%.	2010-01-08 16:41:36 +00:00
pcm-as3525.c	Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)	2010-01-10 14:24:45 +00:00
power-as3525.c	Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.	2008-12-27 19:18:50 +00:00
powermgmt-as3525.c	Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.	2008-11-23 15:00:44 +00:00
powermgmt-target.h	FS#10047 : Clipv2	2009-12-31 19:15:20 +00:00
system-as3525.c	SansaAMS: Disable voltage scaling.	2010-01-12 23:56:59 +00:00
system-target.h	ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.	2009-07-05 01:17:25 +00:00
timer-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
usb-as3525.c	Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader	2009-10-15 10:23:18 +00:00
usb-drv-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00