| .. |
|
sansa-c200v2
|
Implement software pwm to control c200v2 display brightness.
|
2010-03-23 05:27:32 +00:00 |
|
sansa-clip
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-clipplus
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-clipv2
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
sansa-e200v2
|
Update on even pixel boundaries on the e200v2 for best performance (was forgotten in r24198).
|
2010-01-26 21:31:53 +00:00 |
|
sansa-fuze
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
sansa-fuzev2
|
A tiny bit more Sansa Fuze v2 work.
|
2010-03-16 22:38:57 +00:00 |
|
sansa-m200v4
|
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
|
2009-08-15 15:02:51 +00:00 |
|
adc-target.h
|
Sansa AMS: use the AS3514 ADC driver
|
2008-11-10 20:55:56 +00:00 |
|
app.lds
|
Fix as3525 lowmem targets. They put the init code into the plugin buffer, but some init functions are grabbing it.
|
2010-03-04 12:32:12 +00:00 |
|
ascodec-as3525.c
|
Add handler for audio irq.
|
2010-03-23 05:02:37 +00:00 |
|
ascodec-target.h
|
fix r25297 : make ascodec-target.h empty when building sim
|
2010-03-23 07:52:55 +00:00 |
|
audio-as3525.c
|
as3525: do not assume we can record from microphone
|
2010-03-15 01:00:00 +00:00 |
|
backlight-e200v2-fuze.c
|
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
|
2009-06-18 22:33:02 +00:00 |
|
boot.lds
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
button-e200v2-fuze.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
clock-target.h
|
as3525v2: share more of system_init() between the 2 SoCs
|
2010-02-23 06:59:58 +00:00 |
|
dbop-as3525.c
|
Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.
|
2010-02-25 13:26:46 +00:00 |
|
dbop-as3525.h
|
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
|
2010-01-07 22:21:41 +00:00 |
|
debug-as3525.c
|
fix previous revision by using correct definition of i2c prescaler
|
2010-03-23 09:22:03 +00:00 |
|
debug-target.h
|
Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver
|
2009-02-17 02:36:48 +00:00 |
|
dma-pl081.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
dma-target.h
|
Add DMA line for SSP as used in Clip+
|
2010-02-08 08:13:52 +00:00 |
|
fmradio-i2c-as3525.c
|
Clip+: si4702 FM
|
2010-03-15 00:36:13 +00:00 |
|
i2s-as3525.c
|
Fix Clip firmware building by adding missing symbols
|
2008-11-10 11:04:43 +00:00 |
|
kernel-as3525.c
|
Implement software pwm to control c200v2 display brightness.
|
2010-03-23 05:27:32 +00:00 |
|
lcd-as-e200v2-fuze.S
|
Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%.
|
2010-01-08 16:41:36 +00:00 |
|
lcd-ssd1303.c
|
lcd-ssd1303 (all Clips) : move model specific code in their own files
|
2010-03-19 15:13:29 +00:00 |
|
pcm-as3525.c
|
Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)
|
2010-01-10 14:24:45 +00:00 |
|
power-as3525.c
|
Sansa AMS: do not pretend we can power off the tuner
|
2010-03-05 01:43:47 +00:00 |
|
powermgmt-as3525.c
|
Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.
|
2008-11-23 15:00:44 +00:00 |
|
powermgmt-target.h
|
Make Clip+ bootloader build
|
2010-02-05 12:40:25 +00:00 |
|
sd-as3525.c
|
sd-as3525: do not reverse 2 times long responses, read them directly in the needed order
|
2010-03-14 21:46:25 +00:00 |
|
sd-as3525v2.c
|
sd-as3525v2: read cid & csd in the correct order, fix disk info
|
2010-03-22 12:12:09 +00:00 |
|
system-as3525.c
|
Add handler for audio irq.
|
2010-03-23 05:02:37 +00:00 |
|
system-target.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
timer-as3525.c
|
Sansa AMS: VIC_INT_ENABLE register is not a mask
|
2009-11-24 12:05:53 +00:00 |
|
usb-as3525.c
|
Add handler for audio irq.
|
2010-03-23 05:02:37 +00:00 |
|
usb-drv-as3525.c
|
Clip+: enable sound on "as3514" (as3543 in fact)
|
2010-03-20 17:09:44 +00:00 |
|
usb-target.h
|
Add handler for audio irq.
|
2010-03-23 05:02:37 +00:00 |
f5988d4fbd