mirror of
https://github.com/Rockbox/rockbox.git
synced 2025-10-13 10:07:38 -04:00
e829ea9a5e
* FLUSH_EXT is used if featureflag is set and we are using LBA48 (unconditionally used for CE-ATA on ipod6g) * FLUSH is used if featureflag is set (ATA6+) or if device claims to be ATA5+ * Rename ata_disk_can_power_off() to ata_disk_can_sleep() as that is what it actually tests for. Only use it to gate issuing the STANDBY IMMEDIATE command. * Restore behavior of ata_disk_is_active() to return 1 if drive is "spinning" or powered up. * Allow poweroff if drive claims PM support OR we are able to issue FLUSH/FLUSH_EXT commands. * Added ata_flush() to explicitly trigger a flush operation, and hook it up to storage_flush() in the device shutdown path. (Flushes were only previously used in the storage device power management path) * After issuing all settings, re-issue IDENTIFY_DEVICE to make sure it reflects everything we've enabled. * Update manual section on Flash/SSD mods. Change-Id: I6770a54ef3a87f4c47120bcb96c944a6652f1bf4 |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| debian | ||
| docs | ||
| firmware | ||
| fonts | ||
| gdb | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| rbutil/rbutilqt/data | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
| .gitreview | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xJf rockbox.tar.xz
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have mips/m68k/arm-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be generated using the rockboxdev.sh script in the /tools/ folder of the
source.
$ which arm-elf-eabi-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fuzeplus
$ cd build-fuzeplus
$ ../tools/configure
$ mkdir build-xduoox3
$ cd build-xduoox3
$ ../tools/configure
Questions anyone? Ask on the mailing list or on IRC. We'll be happy to help you!