mirror of
https://github.com/Rockbox/rockbox.git
synced 2025-10-13 10:07:38 -04:00
d37bf24d90
Replaces the NATIVE_FREQUENCY constant with a configurable frequency. The user may select 48000Hz if the hardware supports it. The default is still 44100Hz and the minimum is 44100Hz. The setting is located in the playback settings, under "Frequency". "Frequency" was duplicated in english.lang for now to avoid having to fix every .lang file for the moment and throwing everything out of sync because of the new play_frequency feature in features.txt. The next cleanup should combine it with the one included for recording and generalize the ID label. If the hardware doesn't support 48000Hz, no setting will be available. On particular hardware where very high rates are practical and desireable, the upper bound can be extended by patching. The PCM mixer can be configured to play at the full hardware frequency range. The DSP core can configure to the hardware minimum up to the maximum playback setting (some buffers must be reserved according to the maximum rate). If only 44100Hz is supported or possible on a given target for playback, using the DSP and mixer at other samperates is possible if the hardware offers them. Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622 Reviewed-on: http://gerrit.rockbox.org/479 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org> |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| debian | ||
| docs | ||
| firmware | ||
| flash | ||
| fonts | ||
| gdb | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| rbutil | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xjf rockbox.tar.bz2
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be acquired with the rockboxdev.sh script in the /tools/ folder of the
source, or will have been included if you've installed one of the
toolchains or development environments provided at http://www.rockbox.org/
$ which sh-elf-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fmrecorder
$ cd build-fmrecorder
$ ../tools/configure
$ mkdir build-player
$ cd build-player
$ ../tools/configure
Questions anyone? Ask on the mailing list. We'll be happy to help you!