rockbox/firmware/target/hosted/agptek/powermgmt-agptek.c
Aidan MacDonald 806b71b2ed hosted: consolidate sysfs-based battery measurement code
Several hosted targets read their battery state from a fixed
sysfs path. Get rid of the duplicated code by handling this
common case in power-linux.c.

Some targets use non-standard units in sysfs instead of the
typical microvolts / microamps, so allow the scale factors
to be overridden by the target.

Change-Id: I31dc4ffc7a2d2c066d00a74070f9f9849c1663d0
2025-12-01 13:39:04 +00:00

38 lines
1.5 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
*
* Copyright (C) 2017 Marcin Bukat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "powermgmt.h"
#include "power.h"
unsigned short battery_level_disksafe = 3470;
/* the OF shuts down at this voltage */
unsigned short battery_level_shutoff = 3400;
/* voltages (millivolt) of 0%, 10%, ... 100% when charging disabled */
unsigned short percent_to_volt_discharge[11] =
{
3400, 3675, 3715, 3750, 3775, 3810, 3850, 3915, 3985, 4060, 4155
};
/* voltages (millivolt) of 0%, 10%, ... 100% when charging enabled */
unsigned short percent_to_volt_charge[11] =
{
3485, 3780, 3836, 3857, 3890, 3930, 3986, 4062, 4158, 4185, 4196
};