Thomas Martitz b7739fbf1c Rework lcd_enabled and lcd_set/call_enable hook ... a) lcd_enabled() is now lcd_active(), and is available for HAVE_LCD_SLEEP only targets (e.g. ipod video) too. It was depandent on HAVE_LCD_ENALE only before b) rename the hook accordingly, and implement the hook for other other targets too (e.g. the clip [the only mono target with lcd_enable/lcd_sleep yet, so the code is still in the lcd driver], ipod, fuze, c200) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20331 a1c6a512-1295-4272-9138-f99709370657		2009-03-17 02:43:47 +00:00
..
gigabeat-s	Rework lcd_enabled and lcd_set/call_enable hook	2009-03-17 02:43:47 +00:00
app.lds	Gigabeat S: Place SDMA code load address starting in uninitialized section address and copy it to the plugin buffer since it only needed very early in initialization. Will save about 6K in RAM.	2009-02-10 11:34:15 +00:00
boot.lds	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
crt0.S	Gigabeat S: Update some very stale comments about what's going on in the startup code.	2009-02-10 15:48:48 +00:00
debug-imx31.c	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00
debug-target.h	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
rolo_restart.S	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
sdma-imx31.c	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
sdma-imx31.h	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
sdma_script_code.h	Gigabeat S: Place SDMA code load address starting in uninitialized section address and copy it to the plugin buffer since it only needed very early in initialization. Will save about 6K in RAM.	2009-02-10 11:34:15 +00:00
sdma_struct.h	Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.	2009-02-08 22:32:41 +00:00