| .. |
|
adc-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
adc-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
ata-meg-fx.c
|
Gigabeat F/X: Correct the yielding in the ATA. Dump the unneeded DMA transfer complete interrupt in there too. Clean it out.
|
2007-04-30 12:54:05 +00:00 |
|
ata-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
backlight-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
backlight-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
button-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
button-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
dma_start.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
i2c-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
i2c-meg-fx.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
kernel-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
lcd-as-meg-fx.S
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
lcd-meg-fx.c
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
lcd-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
mmu-meg-fx.c
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
mmu-meg-fx.h
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
pcm-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
power-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
sc606-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
sc606-meg-fx.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
system-meg-fx.c
|
Gigabeat F/X: Correct the yielding in the ATA. Dump the unneeded DMA transfer complete interrupt in there too. Clean it out.
|
2007-04-30 12:54:05 +00:00 |
|
system-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
usb-meg-fx.c
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
usb-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
wmcodec-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
a05bb26233