| .. |
|
archos/av300
|
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
|
2010-04-07 20:01:21 +00:00 |
|
as3525
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
at91sam
|
|
|
|
imx31
|
New USB charging system, part 1 - API rework and user-visible setting update
|
2010-06-05 10:05:27 +00:00 |
|
ipod
|
USB charging support for iPods.
|
2010-06-06 13:01:19 +00:00 |
|
iriver
|
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
|
2010-05-15 20:25:56 +00:00 |
|
olympus
|
Port the greylib blitting optimisation to m:robe 100. It's even more efficient on monochrome LCDs - about 20% ISR speedup.
|
2010-05-31 20:13:27 +00:00 |
|
pbell
|
Vibe 500: fix the scrolling through the lists by implementing BUTTON_REPEAT for the scrollstrip.
|
2010-05-24 19:48:06 +00:00 |
|
philips
|
fix YUV Dither for the other targets too, like in r26064.
|
2010-05-24 18:57:11 +00:00 |
|
pnx0101
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
s3c2440
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
s5l8700
|
New USB charging system, part 1 - API rework and user-visible setting update
|
2010-06-05 10:05:27 +00:00 |
|
samsung
|
fix YUV Dither for the other targets too, like in r26064.
|
2010-05-24 18:57:11 +00:00 |
|
sandisk
|
fix YUV Dither for the other targets too, like in r26064.
|
2010-05-24 18:57:11 +00:00 |
|
tatung
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
tcc77x
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
tcc780x
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
tms320dm320
|
Cleanup r26253 red and yellow.
|
2010-05-24 16:57:48 +00:00 |
|
adc-as3514.c
|
adc-as3514.c: cosmetics
|
2010-05-15 19:44:54 +00:00 |
|
adc-pp5020.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
as3514/as3543 fixes
|
2010-05-17 20:53:25 +00:00 |
|
ata-as-arm.S
|
M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed.
|
2009-11-09 00:38:10 +00:00 |
|
ata-nand-telechips.c
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
Enable ATA DMA on pp5020 based players with ATA drives.
|
2010-01-31 11:07:29 +00:00 |
|
ata-sd-pp.c
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
ata-target.h
|
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
|
2010-04-07 20:01:21 +00:00 |
|
audio-pp.c
|
correction on DEFINE, thanks to Kugel who spotted it ;)
|
2009-12-01 18:11:06 +00:00 |
|
crt0-pp-bl.S
|
Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
|
2009-12-25 04:05:01 +00:00 |
|
crt0-pp.S
|
ARM: use BX when branch to an address in register
|
2010-05-31 15:14:26 +00:00 |
|
crt0.S
|
as3525: Fix previous commit, IRAM_ORIG can not be represented as an immediate value on targets with 2MB of ram
|
2010-03-17 05:10:41 +00:00 |
|
ffs-arm.S
|
ARM <= v5: Tiny optimisation exploiting the location of the table.
|
2009-12-26 13:22:51 +00:00 |
|
i2c-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
i2c-telechips.c
|
|
|
|
i2s-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
|
kernel-pp.c
|
|
|
|
lcd-as-memframe.S
|
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
|
2010-05-15 20:25:56 +00:00 |
|
lcd-c200_c200v2.c
|
Apply FS#9194 - LCD invert for Sansa c200/c200v2
|
2010-05-28 19:36:52 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
Remove tabs
|
2010-02-07 17:50:24 +00:00 |
|
memmove-arm.S
|
Remove tabs
|
2010-02-07 17:50:24 +00:00 |
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
|
|
|
mmu-arm.S
|
Update Samsung YP-S3 bootloader demo
|
2010-05-30 21:43:14 +00:00 |
|
mmu-armv6.S
|
mmu-armv6: comment out invalidate_dcache_range()
|
2010-04-13 15:25:11 +00:00 |
|
pcm-pp.c
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
pcm-telechips.c
|
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
|
2010-05-24 16:42:32 +00:00 |
|
powermgmt-ascodec.c
|
as3525v2: fix end of charge detection
|
2010-05-19 14:06:08 +00:00 |
|
sd-pp-target.h
|
|
|
|
support-arm.S
|
Clarify comments in ARMv6 divider regarding special-case handling of large (high bit set) numerators.
|
2010-02-20 06:29:23 +00:00 |
|
system-arm.c
|
Display Fault status address register on data/prefetch aborts
|
2010-03-09 16:19:50 +00:00 |
|
system-arm.h
|
Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining.
|
2009-11-15 22:29:22 +00:00 |
|
system-pp502x.c
|
Packard Bell Vibe 500: reset all allowed devices like in the OF.
|
2010-03-09 19:09:17 +00:00 |
|
system-pp5002.c
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
|
system-target.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
thread-arm.c
|
Threading: Split processor support code into respective target files. C files from /target/xxx are included into thread.c because of essential inlining and files are code, not declarations. Copyrights in each new file go to whoever implemented the first functional support.
|
2010-06-02 12:45:36 +00:00 |
|
thread-pp.c
|
Fix PP5002 builds. Somehow an #else went missing along the line.
|
2010-06-02 12:56:05 +00:00 |
|
timer-pp.c
|
|
|
|
usb-drv-arc.c
|
Fix usb-arc driver: the driver would prematurely mark a transfer as complete whereas only a part of it actually is, check the active of the TDs to avoid that. This should fix some HID+UMS bugs.
|
2010-03-25 13:45:19 +00:00 |
|
usb-fw-pp502x.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-s3c6400x.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
usb-target.h
|
|
|
|
usb-tcc.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
wmcodec-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
wmcodec-telechips.c
|
|
|
9c43b2ce17