mirror of
https://github.com/Rockbox/rockbox.git
synced 2026-10-10 08:03:04 -04:00
98f162b212
Scaffolding for a port, starting from the rk27xx generic target: configure
entry 146 (target id 117, model number 132), config/samsungypcp3.h, and
firmware/target/arm/rk27xx/ypcp3/.
- LCD: the rk27xx LCD interface (lcdif-rk27xx.c) with this panel's init
sequence, from RE. See g#1050. Looks like SPFD5420A 18-bit bus,
400x240 landscape. It differs from the generic panel's sequence in the
gamma curve and in not writing VCOM_HV1.
- Backlight: PD4 / PWM0 with the generic board's timing, which the hwstub
work found to be the same.
- Storage: the microSD slot. Card detect is PC7, active low,
as on the generic board.
- Keys: the YP-R0's key set - five-way yog, Back, Menu, Rec/User, Power -
so the target uses SAMSUNG_YPR0_PAD and its keymaps. Eight keys sit on
two resistor ladders on the LSADC, found in the original firmware and
measured on a unit:
channel 1 up 158, down 295, select 435, left 561, right 687
channel 2 menu 155, back 292, user 431
each key owning half a step either side of its reading;
power is GPIO C1, active high.
Builds as firmware and as bootloader. Status 3 (unusable) in builds.pm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Change-Id: Iff4984023415f341ca7507af6b5b2b551201e953
|
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| docs | ||
| firmware | ||
| fonts | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
| .gitreview | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Clone 'rockbox' from git (or extract a downloaded archive).
$ git clone git://git.rockbox.org/rockbox
or
$ tar xJf rockbox.tar.xz
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have mips/m68k/arm-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be generated using the rockboxdev.sh script in the /tools/ folder of the
source.
$ which arm-elf-eabi-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fuzeplus
$ cd build-fuzeplus
$ ../tools/configure
$ mkdir build-xduoox3
$ cd build-xduoox3
$ ../tools/configure
Questions anyone? Ask on the mailing list or on IRC. We'll be happy to help you!