Boris Gjenero ff1c567417 Remove USB time sync code when there's no RTC. ... Without an RTC, Rockbox doesn't keep time. In that situation, USB time sync previously did nothing but reported success. After this change, the USB time sync request won't be recognized on those targets. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31319 a1c6a512-1295-4272-9138-f99709370657		2011-12-16 00:09:28 +00:00
..
usb_charging_only.c	Comment out LOGF_ENABLE defines everywhere, replace evil comments	2009-11-03 16:25:03 +00:00
usb_charging_only.h	USB retweaking: Take out the USB_REQUEST/RELEASE_DISK scheme and simply ask the USB core whether or not any drivers require exclusive access at the moment of connect. Doing anthing else just produces nasty effects on Windows because it expects some communication just for enabling the PHY and not allowing it to mount volumes if a thread doesn't ack causes annoying error message boxes. Make behavior of each USB type identical from the system perspective. Some miscellaneous changes (simplify, ata->storage naming, define only used USB_* enums values were possible).	2009-01-13 16:27:35 +00:00
usb_class_driver.h	Fix even more tabs	2010-01-03 10:35:31 +00:00
usb_core.c	Fix tabs in .c and .h files in firmware/	2011-05-08 11:37:18 +00:00
usb_hid.c	Commit a HID fix by gevaerts that prevent the HID driver to call usb_drv_send_nonblocking while the previous transfer has not finished because the current stack doesn't support transfer queueing.	2010-03-25 13:50:26 +00:00
usb_hid.h	Flyspray: FS#10326	2009-07-18 12:58:29 +00:00
usb_hid_usage_tables.h	Commit "FS#10468 - USB HID: Show keypad mode on screen"	2009-09-30 10:06:04 +00:00
usb_serial.c	Fix a bug in usbserial that would allow to send messages on EP_CONTROL between usb init and endpoints allocation via logf.	2010-01-11 21:03:48 +00:00
usb_serial.h	Add const to usb_serial_send() buffer.	2009-08-19 05:30:40 +00:00
usb_storage.c	Remove USB time sync code when there's no RTC.	2011-12-16 00:09:28 +00:00
usb_storage.h	Allow class drivers to reuse the core data buffer for control transfers. This doesn't make much difference right now, but it should keep HID memory usage lower (once HID is ready) (FS#10146 by Tomer Shalev)	2009-04-18 20:40:50 +00:00