rockbox/firmware/target/arm/as3525
Amaury Pouly 8ac77fe466 as3525v2-usb: fix bug in ep listing macro, rewrite EP0 handling using a state
There was a stupid bug in endpoint listing which caused random cancelling of EP0 transfers. The new scheme to handle EP0 transfers should avoid an unexpected setup packet which might cause a deadlock or confuse the core.
There is still an issue with the cancel_transfers function is still.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27178 a1c6a512-1295-4272-9138-f99709370657
2010-06-29 18:58:09 +00:00
..
sansa-c200v2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-clip Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-clipplus Fix wrong comments in tuner-clipplus.c 2010-06-22 16:13:16 +00:00
sansa-clipv2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-e200v2 Revert r26350 - fixes FS#11421 2010-06-20 18:10:15 +00:00
sansa-fuze Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-fuzev2 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
sansa-m200v4 Enable display and backlight on panic. 2010-06-18 13:45:24 +00:00
adc-target.h Sansa AMS: use the AS3514 ADC driver 2008-11-10 20:55:56 +00:00
app.lds Revert unrelated part of r25491 : fuzev1 init code works again 2010-04-06 10:21:58 +00:00
ascodec-as3525.c as3525: cache first read of enrd0 register 2010-06-18 19:47:58 +00:00
ascodec-target.h as3525 ascodec: make internal functions statics and remove some details for ascodec-target.h header 2010-06-01 10:16:10 +00:00
audio-as3525.c as3525: fix r26308 2010-05-26 22:58:55 +00:00
backlight-e200v2-fuze.c FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2) 2009-06-18 22:33:02 +00:00
boot.lds as3525*: enable MMU in bootloader 2010-06-18 17:33:51 +00:00
button-e200v2-fuze.c Fuzev2: Scrollwheel works like a charm :) 2010-04-01 16:07:56 +00:00
clock-target.h Revert r26937 (as3525v2: use 248MHz PLL) 2010-06-20 02:01:03 +00:00
dbop-as3525.c DBOP noise on C200v2 goes away if we precharge long enough. 2010-06-27 02:50:24 +00:00
dbop-as3525.h Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now). 2010-01-07 22:21:41 +00:00
debug-as3525.c DBOP noise on C200v2 goes away if we precharge long enough. 2010-06-27 02:50:24 +00:00
debug-target.h Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver 2009-02-17 02:36:48 +00:00
dma-pl081.c sd-as3525 was calling dma_release() without calling dma_retain() first, if 2010-06-17 19:14:42 +00:00
dma-target.h mark some functions as init functions (discarded after init() has run) 2010-05-27 12:00:29 +00:00
fmradio-i2c-as3525.c Apply FS #11423 - Use udelay in AMS driver for FM radio I2C 2010-06-21 21:41:07 +00:00
i2s-as3525.c Fix Clip firmware building by adding missing symbols 2008-11-10 11:04:43 +00:00
kernel-as3525.c Restore return statement in kernel-as3525.c that was accidentally removed in r26330. This fixes c200v2 black screen. 2010-05-28 19:04:30 +00:00
lcd-as-e200v2-fuze-fuzev2.S FS#11335 by me: make ARM assembly functions thumb-friendly 2010-06-11 04:41:36 +00:00
lcd-fuze.c Fuze: don't change gate scan position if lcd_set_flip() is not used 2010-05-29 17:40:37 +00:00
lcd-fuze.h Fuzev1/v2 : lcd_set_flip() 2010-05-29 13:43:18 +00:00
lcd-ssd1303.c as2525(v2): We don't need yuv blitting/greylib support in the bootloader so don't compile it. 2010-04-05 12:17:11 +00:00
memory-init.S as3525*: enable MMU in bootloader 2010-06-18 17:33:51 +00:00
pcm-as3525.c pcm as3525v1: revert 26761 to use faster ASM code 2010-06-11 14:04:48 +00:00
power-as3525.c as3525v2: RTC alarm 2010-05-22 00:28:03 +00:00
powermgmt-target.h Clip+: add charging curve 2010-05-21 12:48:15 +00:00
scrollwheel-as3525.c Fix someone elses yellow and red 2010-04-02 01:41:51 +00:00
sd-as3525.c Fix sd-as3525.c build for non-multidrive targets 2010-06-24 19:12:14 +00:00
sd-as3525v2.c revert r27044 (which was a revert of r26953 & r26954) 2010-06-23 04:34:23 +00:00
system-as3525.c as3525*: initialize cpu_frequency correctly 2010-06-23 07:06:06 +00:00
system-target.h revert r27044 (which was a revert of r26953 & r26954) 2010-06-23 04:34:23 +00:00
timer-as3525.c Sansa AMS: VIC_INT_ENABLE register is not a mask 2009-11-24 12:05:53 +00:00
usb-as3525.c as3525: don't export empty usb_init_device(), declare it as empty inline 2010-05-27 12:00:18 +00:00
usb-drv-as3525.c Enable HID support, clean up usb-drv-as3525.c a bit, add a workaround for weird Linux behaviour (don't have Windows to test with), we don't need to set up USB_PHY_EPx_INFO (OF doesn't bother either). 2010-06-28 09:46:13 +00:00
usb-drv-as3525.h Enable HID support, clean up usb-drv-as3525.c a bit, add a workaround for weird Linux behaviour (don't have Windows to test with), we don't need to set up USB_PHY_EPx_INFO (OF doesn't bother either). 2010-06-28 09:46:13 +00:00
usb-drv-as3525v2.c as3525v2-usb: fix bug in ep listing macro, rewrite EP0 handling using a state 2010-06-29 18:58:09 +00:00
usb-drv-as3525v2.h as3525v2-usb: beginning of a real driver. Setup packet and control transfers work. There is still a problem with the set address request. Still much work to be done. 2010-06-23 22:04:04 +00:00
usb-target.h as3525: don't export empty usb_init_device(), declare it as empty inline 2010-05-27 12:00:18 +00:00