mirror of
https://github.com/Rockbox/rockbox.git
synced 2026-01-22 09:40:35 -05:00
6aeecf5e2c
SAPI only allowed values from 1.0 to 10.0, making it impossible to turn down the volume of the voice. Increasing the volume by a factor of 10.0 is nothing that is likely to be useful, so change the upper limit to 2.0 and decrease the lower limit to 0.0. Lame allowed values from 0.0 to 1.0, making it impossible to increase the volume of the voice. Change the upper limit to 2.0 as well. Change-Id: I8add103f6e4b3c8f1b11ee2c0ea478727bdc99c1 |
||
|---|---|---|
| android | ||
| apps | ||
| backdrops | ||
| bootloader | ||
| debian | ||
| docs | ||
| firmware | ||
| flash | ||
| fonts | ||
| gdb | ||
| icons | ||
| lib | ||
| manual | ||
| packaging | ||
| rbutil | ||
| tools | ||
| uisimulator | ||
| utils | ||
| wps | ||
| .gitattributes | ||
| .gitignore | ||
__________ __ ___.
Open \______ \ ____ ____ | | _\_ |__ _______ ___
Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
\/ \/ \/ \/ \/
Build Your Own Rockbox
1. Check out 'rockbox' from SVN (or extract a downloaded archive).
$ svn co svn://svn.rockbox.org/rockbox/trunk rockbox
or
$ tar xjf rockbox.tar.bz2
2. Create a build directory, preferably in the same directory as the firmware/
and apps/ directories. This is where all generated files will be written.
$ cd rockbox
$ mkdir build
$ cd build
3. Make sure you have sh/arm/m68k-elf-gcc and siblings in the PATH. Make sure
that you have 'perl' in your PATH too. Your gcc cross compiler needs to be
a particular version depending on what player you are compiling for. These
can be acquired with the rockboxdev.sh script in the /tools/ folder of the
source, or will have been included if you've installed one of the
toolchains or development environments provided at http://www.rockbox.org/
$ which sh-elf-gcc
$ which perl
4. In your build directory, run the 'tools/configure' script and enter what
target you want to build for and if you want a debug version or not (and a
few more questions). It'll prompt you. The debug version is for making a
gdb version out of it. It is only useful if you run gdb towards your target
Archos.
$ ../tools/configure
5. *ploink*. Now you have got a Makefile generated for you.
6. Run 'make' and soon the necessary pieces from the firmware and the apps
directories have been compiled, linked and scrambled for you.
$ make
$ make zip
7. unzip the rockbox.zip on your music player, reboot it and
*smile*.
If you want to build for more than one target, just create several build
directories and create a setup for each target:
$ mkdir build-fmrecorder
$ cd build-fmrecorder
$ ../tools/configure
$ mkdir build-player
$ cd build-player
$ ../tools/configure
Questions anyone? Ask on the mailing list. We'll be happy to help you!