..
sansa-c200v2
Enable display and backlight on panic.
2010-06-18 13:45:24 +00:00
sansa-clip
Sansa clip+: fix display brightness for players with newer OLED controller type (and reorganise the variant detection a bit in the process)
2010-07-22 15:31:24 +00:00
sansa-clipplus
Sansa clip+: fix display brightness for players with newer OLED controller type (and reorganise the variant detection a bit in the process)
2010-07-22 15:31:24 +00:00
sansa-clipv2
Sansa clip+: fix display brightness for players with newer OLED controller type (and reorganise the variant detection a bit in the process)
2010-07-22 15:31:24 +00:00
sansa-e200v2
Fuze*/e200v2: remove unused lcd_set_contrast()
2010-07-14 06:48:36 +00:00
sansa-fuze
Enable display and backlight on panic.
2010-06-18 13:45:24 +00:00
sansa-fuzev2
Sansa Clip+: detect AMSv2 variant (just like was already done for fuze v2), this makes SD transfers work for newer clip+ players ("COMBO4E" type). Variable fuzev2_variant has been renamed to amsv2_variant.
2010-07-22 13:47:09 +00:00
sansa-m200v4
Enable display and backlight on panic.
2010-06-18 13:45:24 +00:00
adc-target.h
Sansa AMS: use the AS3514 ADC driver
2008-11-10 20:55:56 +00:00
app.lds
Revert unrelated part of r25491 : fuzev1 init code works again
2010-04-06 10:21:58 +00:00
ascodec-as3525.c
AMS SoC's: Some register bit changes need interrupt protection: timer API and CGU_PERI.
2010-07-02 06:00:00 +00:00
ascodec-target.h
as3525 ascodec: make internal functions statics and remove some details for ascodec-target.h header
2010-06-01 10:16:10 +00:00
audio-as3525.c
AMS SoC's: Some register bit changes need interrupt protection: timer API and CGU_PERI.
2010-07-02 06:00:00 +00:00
backlight-e200v2-fuze.c
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
2009-06-18 22:33:02 +00:00
boot.lds
as3525*: enable MMU in bootloader
2010-06-18 17:33:51 +00:00
button-e200v2-fuze.c
Fuzev2: Scrollwheel works like a charm :)
2010-04-01 16:07:56 +00:00
clock-target.h
Sansa AMSv2: enable PLLB and use it to generate a more accurate PCM frequency (playback rate error improves from 1.1% to 0.04%) - FS #10906 by me.
2010-08-18 21:42:03 +00:00
dbop-as3525.c
DBOP noise on C200v2 goes away if we precharge long enough.
2010-06-27 02:50:24 +00:00
dbop-as3525.h
Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).
2010-01-07 22:21:41 +00:00
debug-as3525.c
Sansa Clip+: detect AMSv2 variant (just like was already done for fuze v2), this makes SD transfers work for newer clip+ players ("COMBO4E" type). Variable fuzev2_variant has been renamed to amsv2_variant.
2010-07-22 13:47:09 +00:00
debug-target.h
Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver
2009-02-17 02:36:48 +00:00
dma-pl081.c
pl081: Fix r27236 warnings. Need system.h.
2010-07-02 06:07:42 +00:00
dma-target.h
mark some functions as init functions (discarded after init() has run)
2010-05-27 12:00:29 +00:00
fmradio-i2c-as3525.c
as3525*: use atomic bit manipulation for CCU_IO
2010-07-19 15:56:15 +00:00
i2s-as3525.c
Fix Clip firmware building by adding missing symbols
2008-11-10 11:04:43 +00:00
kernel-as3525.c
AMS SoC's: Some register bit changes need interrupt protection: timer API and CGU_PERI.
2010-07-02 06:00:00 +00:00
lcd-as-e200v2-fuze-fuzev2.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
lcd-clip.h
lcd-clip.h: mentions clipv2
2010-07-22 17:17:31 +00:00
lcd-fuze.c
Fuze*/e200v2: remove unused lcd_set_contrast()
2010-07-14 06:48:36 +00:00
lcd-fuze.h
Fuzev1/v2 : lcd_set_flip()
2010-05-29 13:43:18 +00:00
lcd-ssd1303.c
Sansa clip+: fix display brightness for players with newer OLED controller type (and reorganise the variant detection a bit in the process)
2010-07-22 15:31:24 +00:00
memory-init.S
as3525*: enable MMU in bootloader
2010-06-18 17:33:51 +00:00
pcm-as3525.c
AMS SoC's: Some register bit changes need interrupt protection: timer API and CGU_PERI.
2010-07-02 06:00:00 +00:00
power-as3525.c
as3525v2: RTC alarm
2010-05-22 00:28:03 +00:00
powermgmt-target.h
Clip+: add charging curve
2010-05-21 12:48:15 +00:00
scrollwheel-as3525.c
Fix someone elses yellow and red
2010-04-02 01:41:51 +00:00
sd-as3525.c
sd-as3525*: use AS3525_PHYSICAL_ADDR
2010-08-25 11:10:40 +00:00
sd-as3525v2.c
AMSv2: remove a bunch of panicf() in SD driver
2010-08-28 11:22:58 +00:00
system-as3525.c
AMS: update the LCD on system exception to be sure the content is up to date
2010-08-31 06:49:08 +00:00
system-target.h
Sansa Clip+: detect AMSv2 variant (just like was already done for fuze v2), this makes SD transfers work for newer clip+ players ("COMBO4E" type). Variable fuzev2_variant has been renamed to amsv2_variant.
2010-07-22 13:47:09 +00:00
timer-as3525.c
AMS SoC's: Some register bit changes need interrupt protection: timer API and CGU_PERI.
2010-07-02 06:00:00 +00:00
tuner-as3525v2.c
The new Fuzev2 use the same FM chip than some Clip+
2010-07-20 06:26:39 +00:00
usb-as3525.c
Sansa AMSv2: don't prevent USB detection to work when rockbox USB stack is used
2010-08-19 16:52:08 +00:00
usb-drv-as3525.c
usb-drv-as3525: only give physical addresses to USB HW
2010-08-25 11:10:48 +00:00
usb-drv-as3525.h
Enable HID support, clean up usb-drv-as3525.c a bit, add a workaround for weird Linux behaviour (don't have Windows to test with), we don't need to set up USB_PHY_EPx_INFO (OF doesn't bother either).
2010-06-28 09:46:13 +00:00
usb-drv-as3525v2.c
Make some global function/variables local (by making them static)
2010-07-30 23:47:49 +00:00
usb-drv-as3525v2.h
as3525v2-usb: beginning of a real driver. Setup packet and control transfers work. There is still a problem with the set address request. Still much work to be done.
2010-06-23 22:04:04 +00:00
usb-target.h
as3525: don't export empty usb_init_device(), declare it as empty inline
2010-05-27 12:00:18 +00:00