mirror of
https://github.com/Rockbox/rockbox.git
synced 2026-10-10 08:03:04 -04:00
98f162b212
Scaffolding for a port, starting from the rk27xx generic target: configure
entry 146 (target id 117, model number 132), config/samsungypcp3.h, and
firmware/target/arm/rk27xx/ypcp3/.
- LCD: the rk27xx LCD interface (lcdif-rk27xx.c) with this panel's init
sequence, from RE. See g#1050. Looks like SPFD5420A 18-bit bus,
400x240 landscape. It differs from the generic panel's sequence in the
gamma curve and in not writing VCOM_HV1.
- Backlight: PD4 / PWM0 with the generic board's timing, which the hwstub
work found to be the same.
- Storage: the microSD slot. Card detect is PC7, active low,
as on the generic board.
- Keys: the YP-R0's key set - five-way yog, Back, Menu, Rec/User, Power -
so the target uses SAMSUNG_YPR0_PAD and its keymaps. Eight keys sit on
two resistor ladders on the LSADC, found in the original firmware and
measured on a unit:
channel 1 up 158, down 295, select 435, left 561, right 687
channel 2 menu 155, back 292, user 431
each key owning half a step either side of its reading;
power is GPIO C1, active high.
Builds as firmware and as bootloader. Status 3 (unusable) in builds.pm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Change-Id: Iff4984023415f341ca7507af6b5b2b551201e953
81 lines
2.1 KiB
Text
81 lines
2.1 KiB
Text
common.c
|
|
format.c
|
|
snprintf.c
|
|
|
|
#if defined(IPOD_NANO2G)
|
|
ipodnano2g.c
|
|
#elif defined(IPOD_6G) || defined(IPOD_NANO3G) || defined(IPOD_NANO4G)
|
|
ipod-s5l87xx.c
|
|
#elif defined(IPOD_ARCH)
|
|
ipod.c
|
|
#elif defined(GIGABEAT_F)
|
|
gigabeat.c
|
|
#elif defined(GIGABEAT_S)
|
|
gigabeat-s.c
|
|
show_logo.c
|
|
../firmware/target/arm/imx31/mmu-imx31.c
|
|
#elif defined(IRIVER_H10) || defined(IRIVER_H10_5GB) || \
|
|
defined(SANSA_E200) || defined(SANSA_C200) || \
|
|
defined(MROBE_100) || defined(PHILIPS_SA9200) || \
|
|
defined(PHILIPS_HDD1630) || defined(PHILIPS_HDD6330) || \
|
|
defined(SAMSUNG_YH820) || defined(SAMSUNG_YH920) || \
|
|
defined(SAMSUNG_YH925)
|
|
#ifdef E200R_INSTALLER
|
|
main-e200r-installer.c
|
|
#elif defined(SANSA_PP_ERASE)
|
|
main-ppsansawipe.c
|
|
fat32format.c
|
|
#else
|
|
show_logo.c
|
|
main-pp.c
|
|
#endif
|
|
#elif defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(IAUDIO_M3)
|
|
iaudio_coldfire.c
|
|
#elif defined(IRIVER_H100_SERIES)
|
|
iriver_h1x0.c
|
|
#elif defined(IRIVER_H300_SERIES)
|
|
iriver_h300.c
|
|
#elif defined(MROBE_500)
|
|
mrobe500.c
|
|
#elif defined(CPU_TCC780X)
|
|
telechips.c
|
|
show_logo.c
|
|
#elif defined(ONDA_VX747) || defined(ONDA_VX747P) || defined(ONDA_VX767) || defined(ONDA_VX777)
|
|
ondavx747.c
|
|
show_logo.c
|
|
#elif defined(XDUOO_X3)
|
|
xduoox3.c
|
|
show_logo.c
|
|
#elif CONFIG_CPU==AS3525 || CONFIG_CPU==AS3525v2
|
|
sansa_as3525.c
|
|
show_logo.c
|
|
#elif CONFIG_CPU==IMX233
|
|
imx233.c
|
|
#elif defined(PBELL_VIBE500)
|
|
main-pp.c
|
|
show_logo.c
|
|
#elif defined(MPIO_HD200) || defined(MPIO_HD300)
|
|
mpio_hd200_hd300.c
|
|
#elif defined(SONY_NWZ_LINUX)
|
|
nwz_linux.c
|
|
#elif defined(HIBY_LINUX) || defined(FIIO_M3K_LINUX)
|
|
hibyos_linux.c
|
|
#elif defined(RK27_GENERIC) || defined(SAMSUNG_YPCP3) || defined(HM60X) || defined(HM801) \
|
|
|| defined(MA9) || defined(MA9C) || defined(MA8) || defined(MA8C) \
|
|
|| defined(IHIFI760) || defined(IHIFI960) || defined(IHIFI800) \
|
|
|| defined(IHIFI770) || defined(IHIFI770C)
|
|
rk27xx.c
|
|
show_logo.c
|
|
#elif defined(SANSA_CONNECT)
|
|
sansaconnect.c
|
|
show_logo.c
|
|
#elif defined(FIIO_M3K) || defined(SHANLING_Q1) || defined(EROS_QN)
|
|
x1000/boot.c
|
|
x1000/gui.c
|
|
x1000/install.c
|
|
x1000/main.c
|
|
x1000/recovery.c
|
|
x1000/utils.c
|
|
#elif defined(ECHO_R1)
|
|
echoplayer.c
|
|
#endif
|