rockbox/firmware/target/mips/ingenic_jz47xx
Solomon Peachy 39285d06d5 xduoox3: Rework how we detect "charging" state
The "charging" status is apparently "charging needed" as it
is asserted even when power is not being supplied.  So first check
to see if USB is connected, and if so, then check the "charging" status.

Change-Id: I3050f187e0b6c9d97d25d80015b413cd02e5c3b2
2025-02-10 09:47:48 -05:00
..
onda_vx747 mips: Convert 'nop' to 'ssnop' -- for future-proofing 2020-09-05 22:18:26 +00:00
onda_vx767 Undo the hacks that allowed targets without LEFT/RIGHT (UP/DN) to build. 2020-10-08 20:30:08 -04:00
xduoo_x3 xduoox3: Rework how we detect "charging" state 2025-02-10 09:47:48 -05:00
app.lds Revert "jx47xx: Rename crt0 'init' sections to 'startup'" 2024-07-03 16:51:58 -04:00
ata-nand-jz4740.c storage: 64-bit sector offsets 2024-08-12 14:23:44 -04:00
ata-nand-jz4760.c storage: 64-bit sector offsets 2024-08-12 14:23:44 -04:00
ata-sd-jz4740.c storage: 64-bit sector offsets 2024-08-12 14:23:44 -04:00
ata-sd-jz4760.c storage: 64-bit sector offsets 2024-08-12 14:23:44 -04:00
backlight-target.h Add cleaned-up xDuoo X3 support 2018-07-28 10:56:31 -04:00
boot.lds mips: consolidate exception handling, add exception backtraces 2022-10-17 09:04:18 -04:00
codec-jz4740.c jz47xx: Audio path tweaks: 2020-09-04 15:57:00 -04:00
codec-jz4760.c xduoox3: Global volume_limit now applies to the line output as well 2021-04-09 15:54:04 -04:00
crt0.S Revert "jx47xx: Rename crt0 'init' sections to 'startup'" 2024-07-03 16:51:58 -04:00
debug-jz4740.c remove debug-target.h 2012-05-07 00:55:59 -04:00
debug-jz4760.c mips: consolidate exception handling, add exception backtraces 2022-10-17 09:04:18 -04:00
dma-target.h Add cleaned-up xDuoo X3 support 2018-07-28 10:56:31 -04:00
dma_acc-jz4740.c mips: Heavily rework DMA & caching code 2020-09-03 15:34:28 -04:00
dma_acc-jz4760.c mips: Heavily rework DMA & caching code 2020-09-03 15:34:28 -04:00
fmradio-i2c-jz4740.c Onda VX747: try at implementing FM tuner support 2009-06-01 21:00:31 +00:00
i2c-jz4740.c Fix red. 2011-12-21 18:08:26 +00:00
i2c-jz4760.c jz4760: Greatly enhance debug code and silence some compilation warnings. 2018-09-20 18:59:19 -04:00
kernel-jz4740.c Onda VX747: 2009-01-27 00:38:58 +00:00
kernel-jz4760.c Add cleaned-up xDuoo X3 support 2018-07-28 10:56:31 -04:00
lcd-jz4740.c Revert "Remove YUV blitting functions and LCD modes" 2022-10-13 11:08:06 -04:00
lcd-jz4760.c Add cleaned-up xDuoo X3 support 2018-07-28 10:56:31 -04:00
lcd-target.h lcd-target.h: remove some duplicate declarations 2012-01-08 00:52:55 +00:00
pcm-jz4740.c Fix yellow from e532714d1f 2021-07-25 15:22:33 +01:00
pcm-jz4760.c Fix remaining yellow from e532714d1f 2021-07-25 14:36:47 +00:00
system-jz4740.c jz47xx: Add support for INIT region 2023-01-13 16:14:42 -05:00
system-jz4760.c fix red from #641e91aa2f 2023-01-13 17:02:23 -05:00
system-target.h mips: consolidate exception handling, add exception backtraces 2022-10-17 09:04:18 -04:00
timer-jz4740.c jz4740: Timer not re-enabled properly 2020-08-28 15:19:07 +00:00
timer-jz4760.c jz4760: Use a #define for the timer id, not a raw number 2020-09-06 00:27:07 +00:00
usb-jz4740.c jz47x0: Minor code quality improvements in the jz47xx USB drivers 2021-11-22 08:08:12 -05:00
usb-jz4760.c jz4760: Reformat USB driver a little. Prep work for later changes. 2022-06-12 17:09:32 -04:00
xdebug.h Add cleaned-up xDuoo X3 support 2018-07-28 10:56:31 -04:00