Michael Sevakis 36bc6a1fd5 Gigabeat S: Revert removal of usb_plugged in r31489 ... Synchronous cable read is still required because the timing of the receipt of the cable event cannot be known for sure-- basically it introduced a thread race between main and pmic. If a keypress is desired instead to enter BL USB mode a la AS3525, then it's possible to remove that. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31510 a1c6a512-1295-4272-9138-f99709370657		2012-01-01 03:19:52 +00:00
..
adc-gigabeat-s.c	Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.	2011-03-02 08:49:38 +00:00
adc-target.h	Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.	2008-12-21 18:10:36 +00:00
audio-gigabeat-s.c	Gigabeat S: Turn off hardware effects (tone and 3d) when doing digital loopback for FM recording otherwise the signal and levels are poorly represented in monitoring (can't just do ADC->DAC for general FM and get voice too). Some tweaking to input setup to improve gain a tiny bit. A little bit quieter startup too.	2010-05-26 05:13:45 +00:00
backlight-gigabeat-s.c	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
backlight-target.h	Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).	2008-12-04 04:16:53 +00:00
button-gigabeat-s.c	Gigabeat S: Do simple direct keypad scanning rather than triggering a separate scan interrupt and it all does the same thing but with 1 tick less latency.	2010-12-29 18:20:31 +00:00
button-target.h	Remove some unused declarations	2009-05-21 12:32:26 +00:00
dvfs_dptc_tables-target.h	i.MX31: Add a debug menu to play around with DVFS/DPTC settings for fun, testing or benchmarking purposes. Can set the CPU frequency working point, whether DPTC voltage scaling is enabled and change the software-programmable load tracking weights.	2011-01-22 16:58:17 +00:00
fmradio-i2c-gigabeat-s.c	Forgot a "static" in r31462.	2011-12-29 13:16:54 +00:00
gpio-gigabeat-s.c	Try to fix r31346	2011-12-17 20:34:27 +00:00
gpio-target.h	FS#12370: Initial RDS support for Si4701/Si4703 tuner (beast and clip zip)	2011-12-17 20:24:19 +00:00
headphone-gigabeat-s.c	Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.	2011-03-02 08:49:38 +00:00
i2s-gigabeat-s.c	Gigabeat S/i.MX31/wm8978: Clean up clocking information in the general wmcodec/pcm drivers and move it to the target's wmcodec/i2s files.	2011-10-17 15:37:14 +00:00
kernel-gigabeat-s.c	i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.	2011-01-23 20:21:35 +00:00
lcd-gigabeat-s.c	i.MX31: Rename something	2011-12-26 15:43:11 +00:00
lcd-target.h	Collect some of the memory frame LCD C code.	2011-12-15 23:07:11 +00:00
mc13783-gigabeat-s.c	usb-target.h: remove	2011-12-31 18:44:55 +00:00
mc13783-target.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
pcm-gigabeat-s.c	Commit to certain names for cache coherency APIs and discard the aliases.	2011-12-17 07:27:24 +00:00
power-gigabeat-s.c	i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.	2011-01-23 20:21:35 +00:00
power-gigabeat-s.h	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
powermgmt-gigabeat-s.c	Gigabeat S: Maintain power thread at realtime priority at all times so it may always service the watchdog on time regardless of playback priority.	2011-10-30 14:32:42 +00:00
powermgmt-target.h	Gigabeat S: Use longer battery filter; lag is not a problem with voltage for charging since it's I-controlled. Initialize local copy of last_inputs for the power routines in target init otherwise the battery filter is reinitialized too soon.	2010-05-19 23:39:59 +00:00
system-gigabeat-s.c	i.MX31: Now that it matters because there's a debug screeen that allows changing things while running, some DVFS/DPTC stuff has to be done more carefully. Trim out some stuff and group functions better as well.	2011-01-23 20:21:35 +00:00
system-target.h	Gigabeat S: Revert removal of usb_plugged in r31489	2012-01-01 03:19:52 +00:00
timer-gigabeat-s.c	Gigabeat S/i.MX31: Sort files in the /target tree into things that are SoC-generic (into /imx31) and player-specific (into /gigabeat-s, based upon current appearances). Move i2s clock init into the appropriate file. Housekeeping only-- no functional changes.	2010-04-09 01:21:53 +00:00
usb-gigabeat-s.c	Gigabeat S: Revert removal of usb_plugged in r31489	2012-01-01 03:19:52 +00:00
wmcodec-gigabeat-s.c	Gigabeat S/i.MX31/wm8978: Clean up clocking information in the general wmcodec/pcm drivers and move it to the target's wmcodec/i2s files.	2011-10-17 15:37:14 +00:00