Cástor Muñoz 32b4558511 iPod Classic: initialize USB power configuration ... This patch limits the drawn USB current to 100/500mA, instead of the actual 200/1000mA settings. It also initializes other USB power related GPIOs. Solves some USB disconnect issues: FS#12990, FS#12956. I am using a powered USB HUB with no problems (Vusb=5.05V unloaded), but there are lots of USB disconnects when using the motherboard USB ports (Vusb=4.91V), this patch solves all my issues. Actually, it seems that the USB current drain is limited to 1000mA, when a load peak occurs most USB2 ports deliver more than 500mA, as current consumption increases the USB voltage decreases, an excesive voltage drop produces USB disconnections. Limiting USB current drain to 500mA also limits the voltage drop, preventing subsequent USB failures. Anyway, to minimize voltage drop, it is recommended to use quality cables and preferably connect to USB ports with higher Vusb. Change-Id: I1b931aa18ec93bfd1214e475a72e42893eff52f6		2015-10-07 06:15:04 +02:00
..
ipod6g	iPod Classic: initialize USB power configuration	2015-10-07 06:15:04 +02:00
app.lds	Get the linker files that slipped through in r31337.	2011-12-17 02:00:59 +00:00
boot.lds	Get the linker files that slipped through in r31337.	2011-12-17 02:00:59 +00:00
crt0.S	arm: factor all exception handlers out of the crt0.S files	2012-04-06 13:46:32 +02:00
debug-s5l8702.c	iPod Classic: implement HAVE_SERIAL	2015-10-07 06:15:03 +02:00
dma-s5l8702.c	iPod Classic: use new PL080 DMA driver	2015-10-07 06:15:03 +02:00
dma-s5l8702.h	iPod Classic: use new PL080 DMA driver	2015-10-07 06:15:03 +02:00
gpio-s5l8702.c	ipod Classic: implement HAVE_RECORDING	2015-10-07 06:15:03 +02:00
gpio-s5l8702.h	iPod Classic: s5l8702 GPIO interrupt controller.	2015-10-07 06:15:03 +02:00
i2c-s5l8702.c	Bulk convert all DOS line endings to UNIX.	2011-11-06 22:44:25 +00:00
kernel-s5l8702.c	iPod Classic: minor modifications in TIMER	2014-12-08 03:07:44 +01:00
pcm-s5l8702.c	ipod Classic: implement HAVE_RECORDING	2015-10-07 06:15:03 +02:00
pcm-target.h	iPod Classic: use new PL080 DMA driver	2015-10-07 06:15:03 +02:00
pl080.c	iPod Classic: introduce PL080 DMA controller driver	2015-10-07 06:15:03 +02:00
system-s5l8702.c	iPod Classic: implement HAVE_SERIAL	2015-10-07 06:15:03 +02:00
system-target.h	Fix last warnings.	2014-03-03 20:34:46 +01:00
timer-s5l8702.c	iPod Classic: minor modifications in TIMER	2014-12-08 03:07:44 +01:00
uart-s5l8702.c	iPod Classic: implement HAVE_SERIAL	2015-10-07 06:15:03 +02:00
uart-s5l8702.h	iPod Classic: implement HAVE_SERIAL	2015-10-07 06:15:03 +02:00
uc8702.c	iPod Classic: introduce s5l8702 UART driver	2015-10-07 06:15:03 +02:00
uc8702.h	iPod Classic: introduce s5l8702 UART driver	2015-10-07 06:15:03 +02:00