| .. |
|
adc-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
adc-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
ata-meg-fx.c
|
Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.
|
2007-05-07 19:34:34 +00:00 |
|
ata-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
backlight-meg-fx.c
|
More Gigabeat button light fixes. Settings now work properly, startup does not cause the button lights to flash when disabled. Buttonlights are now shutdown on power off.
|
2007-05-10 03:08:47 +00:00 |
|
backlight-target.h
|
More Gigabeat button light fixes. Settings now work properly, startup does not cause the button lights to flash when disabled. Buttonlights are now shutdown on power off.
|
2007-05-10 03:08:47 +00:00 |
|
button-meg-fx.c
|
Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.
|
2007-05-07 19:34:34 +00:00 |
|
button-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
dma_start.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
i2c-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
i2c-meg-fx.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
kernel-meg-fx.c
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
lcd-as-meg-fx.S
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
lcd-meg-fx.c
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
lcd-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
mmu-meg-fx.c
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
mmu-meg-fx.h
|
Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds.
|
2007-04-21 04:48:20 +00:00 |
|
pcm-meg-fx.c
|
Gigabeat: Remove the 8kHz for now because it doesn't seem to work too well. Also, HW_SAMPR_CAPS should always be defined for sim and target.
|
2007-05-04 15:21:24 +00:00 |
|
power-meg-fx.c
|
More Gigabeat button light fixes. Settings now work properly, startup does not cause the button lights to flash when disabled. Buttonlights are now shutdown on power off.
|
2007-05-10 03:08:47 +00:00 |
|
sc606-meg-fx.c
|
Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.
|
2007-05-07 19:34:34 +00:00 |
|
sc606-meg-fx.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
system-meg-fx.c
|
Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.
|
2007-05-07 19:34:34 +00:00 |
|
system-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
usb-meg-fx.c
|
Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized.
|
2007-05-07 19:34:34 +00:00 |
|
usb-target.h
|
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
|
2007-04-18 12:22:27 +00:00 |
|
wmcodec-meg-fx.c
|
No more ear doctor visits after powering/unpowering the Gigabeat. Cleanup a little too.
|
2007-05-03 18:08:00 +00:00 |
1fc2d91a83