Torne Wuff 62321ed0bd Make ATA code not bother to retry requests that return IDNF (specified sector not valid). ... There's no point retrying these requests for five seconds, the sector number isn't going to get any more valid. It interferes with being able to detect broken drives like the 5.5G 80GB iPod's. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25525 a1c6a512-1295-4272-9138-f99709370657		2010-04-07 20:01:21 +00:00
..
gigabeat-s	Make ATA code not bother to retry requests that return IDNF (specified sector not valid).	2010-04-07 20:01:21 +00:00
app.lds	Gigabeat S: Place SDMA code load address starting in uninitialized section address and copy it to the plugin buffer since it only needed very early in initialization. Will save about 6K in RAM.	2009-02-10 11:34:15 +00:00
boot.lds	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
ccm-imx31.c	imx31: Rename clkctl-imx31.* to ccm-imx31.* and move up from ...imx31/gigabeat-s to .../imx31. A bunch more should probably go up a level too.	2009-03-22 02:13:27 +00:00
ccm-imx31.h	imx31: Rename clkctl-imx31.* to ccm-imx31.* and move up from ...imx31/gigabeat-s to .../imx31. A bunch more should probably go up a level too.	2009-03-22 02:13:27 +00:00
crt0.S	ARM: lr addresses the next instruction after the failing one in undefined instruction vector	2010-01-24 15:04:21 +00:00
debug-imx31.c	Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places	2009-10-17 18:02:48 +00:00
debug-target.h	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
dvfs_dptc-imx31.c	Gigabeat S (imx31): Begin voltage and frequency scaling code. For now, to avoid overdrive voltage, just lower core voltage to 1.35V since voltage scaling shouldn't be required for frequencies lower than 399 MHz (according to Freescale BSP, which set all working points to 1.35V for those frequencies). Perhaps battery life will improve as well (cross fingers :).	2010-04-07 03:43:48 +00:00
dvfs_dptc-imx31.h	Gigabeat S (imx31): Begin voltage and frequency scaling code. For now, to avoid overdrive voltage, just lower core voltage to 1.35V since voltage scaling shouldn't be required for frequencies lower than 399 MHz (according to Freescale BSP, which set all working points to 1.35V for those frequencies). Perhaps battery life will improve as well (cross fingers :).	2010-04-07 03:43:48 +00:00
rolo_restart.S	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
sdma-imx31.c	imx31: Rename clkctl-imx31.* to ccm-imx31.* and move up from ...imx31/gigabeat-s to .../imx31. A bunch more should probably go up a level too.	2009-03-22 02:13:27 +00:00
sdma-imx31.h	Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB.	2009-03-12 06:31:40 +00:00
sdma_script_code.h	Fix tabs	2010-01-03 10:19:43 +00:00
sdma_struct.h	Fix tabs	2010-01-03 10:19:43 +00:00