Jack Halpin 0466a11028 sd-as3525v2.c Don't reset controller on every pass through the transfer loop. ... The controller only needs to be reset if we had an error to clean up any leftover trash... Move comment pertaining to retry variable so it's actually nearby. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25315 a1c6a512-1295-4272-9138-f99709370657		2010-03-24 05:41:25 +00:00
..
sansa-c200v2	Implement software pwm to control c200v2 display brightness.	2010-03-23 05:27:32 +00:00
sansa-clip	lcd-ssd1303 (all Clips) : move model specific code in their own files	2010-03-19 15:13:29 +00:00
sansa-clipplus	lcd-ssd1303 (all Clips) : move model specific code in their own files	2010-03-19 15:13:29 +00:00
sansa-clipv2	lcd-ssd1303 (all Clips) : move model specific code in their own files	2010-03-19 15:13:29 +00:00
sansa-e200v2	Update on even pixel boundaries on the e200v2 for best performance (was forgotten in r24198).	2010-01-26 21:31:53 +00:00
sansa-fuze	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
sansa-fuzev2	A tiny bit more Sansa Fuze v2 work.	2010-03-16 22:38:57 +00:00
sansa-m200v4	Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled	2009-08-15 15:02:51 +00:00
adc-target.h	Sansa AMS: use the AS3514 ADC driver	2008-11-10 20:55:56 +00:00
app.lds	Fix as3525 lowmem targets. They put the init code into the plugin buffer, but some init functions are grabbing it.	2010-03-04 12:32:12 +00:00
ascodec-as3525.c	Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.	2010-03-23 11:13:17 +00:00
ascodec-target.h	Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.	2010-03-23 11:13:17 +00:00
audio-as3525.c	as3525: do not assume we can record from microphone	2010-03-15 01:00:00 +00:00
backlight-e200v2-fuze.c	FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)	2009-06-18 22:33:02 +00:00
boot.lds	Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.	2010-03-08 23:16:57 +00:00
button-e200v2-fuze.c	Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.	2010-02-25 13:26:46 +00:00
clock-target.h	SansaAMSv2: Give register CGU_BASE + 0x3C the name CGU_SDSLOT.	2010-03-23 17:00:59 +00:00
dbop-as3525.c	Add Sansa Fuzev2 to the target tree. Bootloader builds, but is completely untested.	2010-02-25 13:26:46 +00:00
dbop-as3525.h	Sansa AMS: Time has shown that switching between 16 and 32bit mode costs much time (due to the micro delay needed), so do 32bit transfers unconditionally for lcd updates at the cost of updating slightly larger rectangles (gives upto 15% speed up, nearly at maximum now).	2010-01-07 22:21:41 +00:00
debug-as3525.c	SansaAMSv2: Give register CGU_BASE + 0x3C the name CGU_SDSLOT.	2010-03-23 17:00:59 +00:00
debug-target.h	Some Sansa Fuze work: Get Home button working (no keymap changes yet, so it's not very noticeable) and "fix" debug menu from not showing the dbop data (see FIXME), some cleanup in the fuze's button driver	2009-02-17 02:36:48 +00:00
dma-pl081.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
dma-target.h	Add DMA line for SSP as used in Clip+	2010-02-08 08:13:52 +00:00
fmradio-i2c-as3525.c	Clip+: si4702 FM	2010-03-15 00:36:13 +00:00
i2s-as3525.c	Fix Clip firmware building by adding missing symbols	2008-11-10 11:04:43 +00:00
kernel-as3525.c	Implement software pwm to control c200v2 display brightness.	2010-03-23 05:27:32 +00:00
lcd-as-e200v2-fuze.S	Sansa e200v2/Fuze: Optimize YUV blitting by writing 2 pixel at once to the DBOP and removing a few unneeded busy polling status register for fifo empty. Speed up between 50% and 80%.	2010-01-08 16:41:36 +00:00
lcd-ssd1303.c	lcd-ssd1303 (all Clips) : move model specific code in their own files	2010-03-19 15:13:29 +00:00
pcm-as3525.c	Sansa AMS: allow use of PLL B for more accurate audio sample rate (0.04% instead 0.15% error)	2010-01-10 14:24:45 +00:00
power-as3525.c	Sansa AMS: do not pretend we can power off the tuner	2010-03-05 01:43:47 +00:00
powermgmt-as3525.c	Implement a basic uncalibrated battery reading for all as3525 targets with a lithium battery.	2008-11-23 15:00:44 +00:00
powermgmt-target.h	Make Clip+ bootloader build	2010-02-05 12:40:25 +00:00
sd-as3525.c	sd-as3525: do not reverse 2 times long responses, read them directly in the needed order	2010-03-14 21:46:25 +00:00
sd-as3525v2.c	sd-as3525v2.c Don't reset controller on every pass through the transfer loop.	2010-03-24 05:41:25 +00:00
system-as3525.c	Add handler for audio irq.	2010-03-23 05:02:37 +00:00
system-target.h	ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.	2009-07-05 01:17:25 +00:00
timer-as3525.c	Sansa AMS: VIC_INT_ENABLE register is not a mask	2009-11-24 12:05:53 +00:00
usb-as3525.c	No intentional warnings.	2010-03-23 13:21:19 +00:00
usb-drv-as3525.c	Clip+: enable sound on "as3514" (as3543 in fact)	2010-03-20 17:09:44 +00:00
usb-target.h	Limit AUDIO_IRQ handling to AS3525, since it doesn't work on the newer SoC in SANSA_CLIPPLUS yet.	2010-03-23 11:13:17 +00:00