len0rd/rockbox
1
0
Fork 1
mirror of https://github.com/Rockbox/rockbox.git synced 2025-10-13 10:07:38 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
rockbox/firmware/drivers/ata.c
Solomon Peachy 4960a3b753 ipod: Turn on SMART support for all PP502x-based iPods 
Unless you've modded the device with modern CF or mSATA storage, it's
not likely to achieve anything.  the original hard drives (supposedly)
lack SMART support, and none of the SD adapters bother to emulate it.

Change-Id: Id3cbe717c64947faf4b23d8c84a04b822cfb35da
2025-09-16 10:59:57 -04:00

1338 lines
34 KiB
C
Raw Permalink Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2002 by Alan Korr
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
//#define LOGF_ENABLE
#include <stdbool.h>
#include <inttypes.h>
#include "led.h"
#include "cpu.h"
#include "system.h"
#include "debug.h"
#include "panic.h"
#include "power.h"
#include "string.h"
#include "ata-driver.h"
#include "ata-defines.h"
#include "fs_defines.h"
#include "storage.h"
#include "logf.h"
#define SELECT_DEVICE1 0x10
#define SELECT_LBA 0x40
#define CONTROL_nIEN 0x02
#define CONTROL_SRST 0x04
#define CMD_READ_SECTORS 0x20
#define CMD_WRITE_SECTORS 0x30
#define CMD_WRITE_SECTORS_EXT 0x34
#define CMD_READ_MULTIPLE 0xC4
#define CMD_READ_MULTIPLE_EXT 0x29
#define CMD_WRITE_MULTIPLE 0xC5
#define CMD_WRITE_MULTIPLE_EXT 0x39
#define CMD_SET_MULTIPLE_MODE 0xC6
#ifdef HAVE_ATA_SMART
#define CMD_SMART 0xB0
#endif
#define CMD_STANDBY_IMMEDIATE 0xE0
#define CMD_STANDBY 0xE2
#define CMD_IDENTIFY 0xEC
#define CMD_SLEEP 0xE6
#define CMD_FLUSH_CACHE 0xE7
#define CMD_FLUSH_CACHE_EXT 0xEA
#define CMD_SET_FEATURES 0xEF
#define CMD_SECURITY_FREEZE_LOCK 0xF5
#ifdef HAVE_ATA_DMA
#define CMD_READ_DMA 0xC8
#define CMD_READ_DMA_EXT 0x25
#define CMD_WRITE_DMA 0xCA
#define CMD_WRITE_DMA_EXT 0x35
#endif
#define READWRITE_TIMEOUT 5*HZ
#ifdef HAVE_ATA_POWER_OFF
#define ATA_POWER_OFF_TIMEOUT 2*HZ
#endif
#if defined(HAVE_USBSTACK)
#define ATA_ACTIVE_IN_USB 1
#else
#define ATA_ACTIVE_IN_USB 0
#endif
enum {
ATA_BOOT = -1,
ATA_OFF,
ATA_SLEEPING,
ATA_SPINUP,
ATA_ON,
};
static int ata_state = ATA_BOOT;
static struct mutex ata_mutex SHAREDBSS_ATTR;
static int ata_device; /* device 0 (master) or 1 (slave) */
static int spinup_time = 0;
#if (CONFIG_LED == LED_REAL)
static bool ata_led_enabled = true;
static bool ata_led_on = false;
#endif
static long sleep_timeout = 5*HZ;
#ifdef HAVE_LBA48
static bool ata_lba48 = false; /* set for 48 bit addressing */
#endif
static bool canflush = true;
static long last_disk_activity = -1;
#ifdef HAVE_ATA_POWER_OFF
static long power_off_tick = 0;
#endif
static sector_t total_sectors;
static uint32_t log_sector_size;
static uint8_t multisectors; /* number of supported multisectors */
static unsigned short identify_info[ATA_IDENTIFY_WORDS] STORAGE_ALIGN_ATTR;
#ifdef HAVE_ATA_DMA
static int dma_mode = 0;
#endif
#ifdef HAVE_ATA_POWER_OFF
static int ata_power_on(void);
#endif
static int perform_soft_reset(void);
static int set_multiple_mode(int sectors);
static int set_features(void);
static inline void keep_ata_active(void)
{
last_disk_activity = current_tick;
}
static inline bool ata_sleep_timed_out(void)
{
return sleep_timeout &&
TIME_AFTER(current_tick, last_disk_activity + sleep_timeout);
}
static inline bool ata_power_off_timed_out(void)
{
#ifdef HAVE_ATA_POWER_OFF
return power_off_tick && TIME_AFTER(current_tick, power_off_tick);
#else
return false;
#endif
}
#ifndef ATA_TARGET_POLLING
static ICODE_ATTR int wait_for_bsy(void)
{
long timeout = current_tick + HZ*30;
do
{
if (!(ATA_IN8(ATA_STATUS) & STATUS_BSY))
return 1;
keep_ata_active();
yield();
} while (TIME_BEFORE(current_tick, timeout));
return 0; /* timeout */
}
static ICODE_ATTR int wait_for_rdy(void)
{
long timeout;
if (!wait_for_bsy())
return 0;
timeout = current_tick + HZ*10;
do
{
if (ATA_IN8(ATA_ALT_STATUS) & STATUS_RDY)
return 1;
keep_ata_active();
yield();
} while (TIME_BEFORE(current_tick, timeout));
return 0; /* timeout */
}
#else
#define wait_for_bsy ata_wait_for_bsy
#define wait_for_rdy ata_wait_for_rdy
#endif
static int ata_perform_wakeup(int state)
{
logf("ata WAKE %ld", current_tick);
if (state > ATA_OFF) {
if (perform_soft_reset()) {
return -1;
}
}
#ifdef HAVE_ATA_POWER_OFF
else {
if (ata_power_on()) {
return -2;
}
}
#endif
return 0;
}
static int ata_perform_sleep(void)
{
/* If device doesn't support PM features, don't try to sleep. */
if (!ata_disk_can_sleep())
return 0; // XXX or return a failure?
logf("ata SLEEP %ld", current_tick);
ATA_OUT8(ATA_SELECT, ata_device);
if(!wait_for_rdy()) {
DEBUGF("ata_perform_sleep() - not RDY\n");
return -1;
}
/* STANDBY IMMEDIATE
- writes all cached data
- transitions to PM2:Standby
- enters Standby_z power condition
This places the device into a state where power-off is safe. We
will cut power at a later time.
*/
ATA_OUT8(ATA_COMMAND, CMD_STANDBY_IMMEDIATE);
if (!wait_for_rdy()) {
DEBUGF("ata_perform_sleep() - CMD failed\n");
return -2;
}
return 0;
}
static int ata_perform_flush_cache(void)
{
uint8_t cmd;
if (!canflush) {
return 0;
#ifdef HAVE_LBA48
} else if (ata_lba48 && identify_info[83] & (1 << 13)) {
cmd = CMD_FLUSH_CACHE_EXT; /* Flag, optional, ATA-6 and up, for use with LBA48 devices */
#endif
} else if (identify_info[83] & (1 << 12)) {
cmd = CMD_FLUSH_CACHE; /* Flag, mandatory, ATA-6 and up */
} else if (identify_info[80] >= (1 << 5)) { /* Use >= instead of '&' because bits lower than the latest standard we support don't have to be set */
cmd = CMD_FLUSH_CACHE; /* No flag, mandatory, ATA-5 (Optional for ATA-4) */
} else {
/* If neither (mandatory!) command is supported
then don't issue it. */
canflush = 0;
return 0;
}
logf("ata FLUSH CACHE %ld", current_tick);
ATA_OUT8(ATA_SELECT, ata_device);
if(!wait_for_rdy()) {
DEBUGF("ata_perform_flush_cache() - not RDY\n");
return -1;
}
ATA_OUT8(ATA_COMMAND, cmd);
if (!wait_for_rdy()) {
DEBUGF("ata_perform_flush_cache() - CMD failed\n");
return -2;
}
return 0;
}
int ata_flush(void)
{
if (ata_state >= ATA_SPINUP) {
mutex_lock(&ata_mutex);
ata_perform_flush_cache();
mutex_unlock(&ata_mutex);
}
return 0;
}
static ICODE_ATTR int wait_for_start_of_transfer(void)
{
if (!wait_for_bsy())
return 0;
return (ATA_IN8(ATA_ALT_STATUS) & (STATUS_BSY|STATUS_DRQ)) == STATUS_DRQ;
}
static ICODE_ATTR int wait_for_end_of_transfer(void)
{
if (!wait_for_bsy())
return 0;
return (ATA_IN8(ATA_ALT_STATUS) &
(STATUS_BSY|STATUS_RDY|STATUS_DF|STATUS_DRQ|STATUS_ERR))
== STATUS_RDY;
}
#if (CONFIG_LED == LED_REAL)
/* Conditionally block LED access for the ATA driver, so the LED can be
* (mis)used for other purposes */
static void ata_led(bool on)
{
ata_led_on = on;
if (ata_led_enabled)
led(ata_led_on);
}
#else
#define ata_led(on) led(on)
#endif
#ifndef ATA_OPTIMIZED_READING
static ICODE_ATTR void copy_read_sectors(unsigned char* buf, int wordcount)
{
unsigned short tmp = 0;
if ( (unsigned long)buf & 1)
{ /* not 16-bit aligned, copy byte by byte */
unsigned char* bufend = buf + wordcount*2;
do
{
tmp = ATA_IN16(ATA_DATA);
#if defined(ROCKBOX_LITTLE_ENDIAN)
*buf++ = tmp & 0xff; /* I assume big endian */
*buf++ = tmp >> 8; /* and don't use the SWAB16 macro */
#else
*buf++ = tmp >> 8;
*buf++ = tmp & 0xff;
#endif
} while (buf < bufend); /* tail loop is faster */
}
else
{ /* 16-bit aligned, can do faster copy */
unsigned short* wbuf = (unsigned short*)buf;
unsigned short* wbufend = wbuf + wordcount;
do
{
*wbuf = ATA_IN16(ATA_DATA);
} while (++wbuf < wbufend); /* tail loop is faster */
}
}
#endif /* !ATA_OPTIMIZED_READING */
#ifndef ATA_OPTIMIZED_WRITING
static ICODE_ATTR void copy_write_sectors(const unsigned char* buf,
int wordcount)
{
if ( (unsigned long)buf & 1)
{ /* not 16-bit aligned, copy byte by byte */
unsigned short tmp = 0;
const unsigned char* bufend = buf + wordcount*2;
do
{
#if defined(ROCKBOX_LITTLE_ENDIAN)
tmp = (unsigned short) *buf++;
tmp |= (unsigned short) *buf++ << 8;
#else
tmp = (unsigned short) *buf++ << 8;
tmp |= (unsigned short) *buf++;
#endif
ATA_OUT16(ATA_DATA, tmp);
} while (buf < bufend); /* tail loop is faster */
}
else
{ /* 16-bit aligned, can do faster copy */
unsigned short* wbuf = (unsigned short*)buf;
unsigned short* wbufend = wbuf + wordcount;
do
{
ATA_OUT16(ATA_DATA, *wbuf);
} while (++wbuf < wbufend); /* tail loop is faster */
}
}
#endif /* !ATA_OPTIMIZED_WRITING */
static int ata_transfer_sectors(uint64_t start,
int incount,
void* inbuf,
int write)
{
int ret = 0;
long timeout;
int count;
void* buf;
long spinup_start = spinup_start;
#ifdef HAVE_ATA_DMA
bool usedma = false;
#endif
if (start + incount > total_sectors) {
ret = -1;
goto error;
}
keep_ata_active();
ata_led(true);
if (ata_state < ATA_ON) {
spinup_start = current_tick;
int state = ata_state;
ata_state = ATA_SPINUP;
if (ata_perform_wakeup(state)) {
ret = -2;
goto error;
}
}
logf("ata XFER (%d) %d @ %llu", write, incount, start);
timeout = current_tick + READWRITE_TIMEOUT;
ATA_OUT8(ATA_SELECT, ata_device);
if (!wait_for_rdy())
{
ret = -3;
goto error;
}
retry:
buf = inbuf;
count = incount;
while (TIME_BEFORE(current_tick, timeout)) {
ret = 0;
keep_ata_active();
#ifdef HAVE_ATA_DMA
/* If DMA is supported and parameters are ok for DMA, use it */
if (dma_mode && ata_dma_setup(inbuf, incount * log_sector_size, write))
usedma = true;
#endif
#ifdef HAVE_LBA48
if (ata_lba48)
{
ATA_OUT8(ATA_NSECTOR, count >> 8);
ATA_OUT8(ATA_NSECTOR, count & 0xff);
ATA_OUT8(ATA_SECTOR, (start >> 24) & 0xff); /* 31:24 */
ATA_OUT8(ATA_SECTOR, start & 0xff); /* 7:0 */
ATA_OUT8(ATA_LCYL, (start >> 32) & 0xff); /* 39:32 */
ATA_OUT8(ATA_LCYL, (start >> 8) & 0xff); /* 15:8 */
ATA_OUT8(ATA_HCYL, (start >> 40) & 0xff); /* 47:40 */
ATA_OUT8(ATA_HCYL, (start >> 16) & 0xff); /* 23:16 */
ATA_OUT8(ATA_SELECT, SELECT_LBA | ata_device);
#ifdef HAVE_ATA_DMA
if (write)
ATA_OUT8(ATA_COMMAND, usedma ? CMD_WRITE_DMA_EXT : CMD_WRITE_MULTIPLE_EXT);
else
ATA_OUT8(ATA_COMMAND, usedma ? CMD_READ_DMA_EXT : CMD_READ_MULTIPLE_EXT);
#else
ATA_OUT8(ATA_COMMAND, write ? CMD_WRITE_MULTIPLE_EXT : CMD_READ_MULTIPLE_EXT);
#endif
}
else
#endif
{
ATA_OUT8(ATA_NSECTOR, count & 0xff); /* 0 means 256 sectors */
ATA_OUT8(ATA_SECTOR, start & 0xff);
ATA_OUT8(ATA_LCYL, (start >> 8) & 0xff);
ATA_OUT8(ATA_HCYL, (start >> 16) & 0xff);
ATA_OUT8(ATA_SELECT, ((start >> 24) & 0xf) | SELECT_LBA | ata_device); /* LBA28, mask off upper 4 bits of 32-bit sector address */
#ifdef HAVE_ATA_DMA
if (write)
ATA_OUT8(ATA_COMMAND, usedma ? CMD_WRITE_DMA : CMD_WRITE_MULTIPLE);
else
ATA_OUT8(ATA_COMMAND, usedma ? CMD_READ_DMA : CMD_READ_MULTIPLE);
#else
ATA_OUT8(ATA_COMMAND, write ? CMD_WRITE_MULTIPLE : CMD_READ_MULTIPLE);
#endif
}
/* wait at least 400ns between writing command and reading status */
__asm__ volatile ("nop");
__asm__ volatile ("nop");
__asm__ volatile ("nop");
__asm__ volatile ("nop");
__asm__ volatile ("nop");
#ifdef HAVE_ATA_DMA
if (usedma) {
if (!ata_dma_finish())
ret = -7;
if (ret != 0) {
perform_soft_reset();
goto retry;
}
if (ata_state == ATA_SPINUP) {
ata_state = ATA_ON;
spinup_time = current_tick - spinup_start;
}
}
else
#endif /* HAVE_ATA_DMA */
{
while (count) {
int sectors;
int wordcount;
int status;
int error;
if (!wait_for_start_of_transfer()) {
/* We have timed out waiting for RDY and/or DRQ, possibly
because the hard drive is shaking and has problems
reading the data. We have two options:
1) Wait some more
2) Perform a soft reset and try again.
We choose alternative 2.
*/
perform_soft_reset();
ret = -5;
goto retry;
}
if (ata_state == ATA_SPINUP) {
ata_state = ATA_ON;
spinup_time = current_tick - spinup_start;
}
/* read the status register exactly once per loop */
status = ATA_IN8(ATA_STATUS);
error = ATA_IN8(ATA_ERROR);
if (count >= multisectors)
sectors = multisectors;
else
sectors = count;
wordcount = sectors * log_sector_size / 2;
if (write)
copy_write_sectors(buf, wordcount);
else
copy_read_sectors(buf, wordcount);
/*
"Device errors encountered during READ MULTIPLE commands
are posted at the beginning of the block or partial block
transfer, but the DRQ bit is still set to one and the data
transfer shall take place, including transfer of corrupted
data, if any."
-- ATA specification
*/
if ( status & (STATUS_BSY | STATUS_ERR | STATUS_DF) ) {
perform_soft_reset();
ret = -6;
/* no point retrying IDNF, sector no. was invalid */
if (error & ERROR_IDNF)
break;
goto retry;
}
buf += sectors * log_sector_size; /* Advance one chunk of sectors */
count -= sectors;
keep_ata_active();
}
}
if(!ret && !wait_for_end_of_transfer()) {
int error;
error = ATA_IN8(ATA_ERROR);
perform_soft_reset();
ret = -4;
/* no point retrying IDNF, sector no. was invalid */
if (error & ERROR_IDNF)
break;
goto retry;
}
break;
}
error:
ata_led(false);
if (ret < 0 && ata_state == ATA_SPINUP) {
/* bailed out before updating */
ata_state = ATA_ON;
}
return ret;
}
#include "ata-common.c"
#ifndef MAX_PHYS_SECTOR_SIZE
int ata_read_sectors(IF_MD(int drive,)
sector_t start,
int incount,
void* inbuf)
{
#ifdef HAVE_MULTIDRIVE
(void)drive; /* unused for now */
#endif
mutex_lock(&ata_mutex);
int rc = ata_transfer_sectors(start, incount, inbuf, false);
mutex_unlock(&ata_mutex);
return rc;
}
int ata_write_sectors(IF_MD(int drive,)
sector_t start,
int count,
const void* buf)
{
#ifdef HAVE_MULTIDRIVE
(void)drive; /* unused for now */
#endif
mutex_lock(&ata_mutex);
int rc = ata_transfer_sectors(start, count, (void*)buf, true);
mutex_unlock(&ata_mutex);
return rc;
}
#endif /* ndef MAX_PHYS_SECTOR_SIZE */
static int STORAGE_INIT_ATTR check_registers(void)
{
int i;
wait_for_bsy();
if (ATA_IN8(ATA_STATUS) & STATUS_BSY)
return -1;
for (i = 0; i<64; i++) {
ATA_OUT8(ATA_NSECTOR, TEST_PATTERN1);
ATA_OUT8(ATA_SECTOR, TEST_PATTERN2);
ATA_OUT8(ATA_LCYL, TEST_PATTERN3);
ATA_OUT8(ATA_HCYL, TEST_PATTERN4);
if (((ATA_IN8(ATA_NSECTOR) & 0xff) == TEST_PATTERN1) &&
((ATA_IN8(ATA_SECTOR) & 0xff) == TEST_PATTERN2) &&
((ATA_IN8(ATA_LCYL) & 0xff) == TEST_PATTERN3) &&
((ATA_IN8(ATA_HCYL) & 0xff) == TEST_PATTERN4))
return 0;
sleep(1);
}
return -2;
}
static int freeze_lock(void)
{
/* does the disk support Security Mode feature set? */
if (identify_info[82] & 2)
{
ATA_OUT8(ATA_SELECT, ata_device);
if (!wait_for_rdy())
return -1;
ATA_OUT8(ATA_COMMAND, CMD_SECURITY_FREEZE_LOCK);
if (!wait_for_rdy())
return -2;
}
return 0;
}
void ata_spindown(int seconds)
{
sleep_timeout = seconds * HZ;
}
bool ata_disk_is_active(void)
{
return (ata_state >= ATA_SPINUP);
}
void ata_sleepnow(void)
{
if (ata_state >= ATA_SPINUP) {
logf("ata SLEEPNOW %ld", current_tick);
mutex_lock(&ata_mutex);
if (ata_state == ATA_ON) {
if (!ata_perform_flush_cache() && !ata_perform_sleep()) {
ata_state = ATA_SLEEPING;
#ifdef HAVE_ATA_POWER_OFF
if (ata_disk_can_sleep() || canflush) {
power_off_tick = current_tick + ATA_POWER_OFF_TIMEOUT;
}
#endif
}
}
mutex_unlock(&ata_mutex);
}
}
void ata_spin(void)
{
keep_ata_active();
}
/* Hardware reset protocol as specified in chapter 9.1, ATA spec draft v5 */
#ifdef HAVE_ATA_POWER_OFF
static int ata_hard_reset(void)
#else
static int STORAGE_INIT_ATTR ata_hard_reset(void)
#endif
{
int ret;
mutex_lock(&ata_mutex);
ata_reset();
/* state HRR2 */
ATA_OUT8(ATA_SELECT, ata_device); /* select the right device */
ret = wait_for_bsy();
/* Massage the return code so it is 0 on success and -1 on failure */
ret = ret?0:-1;
mutex_unlock(&ata_mutex);
return ret;
}
#ifdef HAVE_ATA_SMART
static int ata_smart(uint16_t *buf, uint8_t cmd)
{
int i;
ATA_OUT8(ATA_SELECT, ata_device);
if(!wait_for_rdy()) {
DEBUGF("identify() - not RDY\n");
return -1;
}
ATA_OUT8(ATA_FEATURE, cmd);
ATA_OUT8(ATA_HCYL, 0xc2);
ATA_OUT8(ATA_LCYL, 0x4f);
ATA_OUT8(ATA_SELECT, SELECT_LBA | ata_device);
ATA_OUT8(ATA_COMMAND, CMD_SMART);
if (!wait_for_start_of_transfer())
{
DEBUGF("identify() - CMD failed\n");
return -2;
}
for (i = 0 ; i < 256 ; i++) {
/* The SMART words are already swapped, so we need to treat
this info differently that normal sector data */
buf[i] = ATA_SWAP_IDENTIFY(ATA_IN16(ATA_DATA));
}
return 0;
}
int ata_read_smart(struct ata_smart_values* smart_data, uint8_t cmd)
{
mutex_lock(&ata_mutex);
int rc = ata_smart((uint16_t*)smart_data, cmd);
mutex_unlock(&ata_mutex);
return rc;
}
#endif /* HAVE_ATA_SMART */
// not putting this into STORAGE_INIT_ATTR, as ATA spec recommends to
// re-read identify_info after soft reset. So we'll do that.
static int identify(void)
{
int i;
ATA_OUT8(ATA_SELECT, ata_device);
if(!wait_for_rdy()) {
DEBUGF("identify() - not RDY\n");
return -1;
}
ATA_OUT8(ATA_COMMAND, CMD_IDENTIFY);
if (!wait_for_start_of_transfer())
{
DEBUGF("identify() - CMD failed\n");
return -2;
}
for (i=0; i<ATA_IDENTIFY_WORDS; i++) {
/* the IDENTIFY words are already swapped, so we need to treat
this info differently that normal sector data */
identify_info[i] = ATA_SWAP_IDENTIFY(ATA_IN16(ATA_DATA));
}
return 0;
}
static int perform_soft_reset(void)
{
/* If this code is allowed to run on a Nano, the next reads from the flash will
* time out, so we disable it. It shouldn't be necessary anyway, since the
* ATA -> Flash interface automatically sleeps almost immediately after the
* last command.
*/
int ret;
int retry_count;
logf("ata SOFT RESET %ld", current_tick);
ATA_OUT8(ATA_SELECT, SELECT_LBA | ata_device );
ATA_OUT8(ATA_CONTROL, CONTROL_nIEN|CONTROL_SRST );
sleep(1); /* >= 5us */
#ifdef HAVE_ATA_DMA
/* DMA requires INTRQ be enabled */
ATA_OUT8(ATA_CONTROL, 0);
#else
ATA_OUT8(ATA_CONTROL, CONTROL_nIEN);
#endif
sleep(1); /* >2ms */
/* This little sucker can take up to 30 seconds */
retry_count = 8;
do
{
ret = wait_for_rdy();
} while(!ret && retry_count--);
if (!ret)
return -1;
if (identify())
return -5;
if ((ret = set_features()))
return -60 + ret;
if (set_multiple_mode(multisectors))
return -3;
if (identify())
return -2;
if (freeze_lock())
return -4;
return 0;
}
int ata_soft_reset(void)
{
int ret = -6;
mutex_lock(&ata_mutex);
if (ata_state > ATA_OFF) {
ret = perform_soft_reset();
}
mutex_unlock(&ata_mutex);
return ret;
}
#ifdef HAVE_ATA_POWER_OFF
static int ata_power_on(void)
{
int rc;
logf("ata ON %ld", current_tick);
ide_power_enable(true);
sleep(HZ/4); /* allow voltage to build up */
/* Accessing the PP IDE controller too early after powering up the disk
* makes the core hang for a short time, causing an audio dropout. This
* also depends on the disk; iPod Mini G2 needs at least HZ/5 to get rid
* of the dropout. Since this time isn't additive (the wait_for_bsy() in
* ata_hard_reset() will shortened by the same amount), it's a good idea
* to do this on all HDD based targets. */
if( ata_hard_reset() )
return -1;
if (identify())
return -5;
rc = set_features();
if (rc)
return -60 + rc;
if (set_multiple_mode(multisectors))
return -3;
if (identify())
return -2;
if (freeze_lock())
return -4;
return 0;
}
#endif /* HAVE_ATA_POWER_OFF */
static int STORAGE_INIT_ATTR master_slave_detect(void)
{
/* master? */
ATA_OUT8(ATA_SELECT, 0);
if (ATA_IN8(ATA_STATUS) & (STATUS_RDY|STATUS_BSY)) {
ata_device = 0;
DEBUGF("Found master harddisk\n");
}
else {
/* slave? */
ATA_OUT8(ATA_SELECT, SELECT_DEVICE1);
if (ATA_IN8(ATA_STATUS) & (STATUS_RDY|STATUS_BSY)) {
ata_device = SELECT_DEVICE1;
DEBUGF("Found slave harddisk\n");
}
else
return -1;
}
return 0;
}
static int set_multiple_mode(int sectors)
{
ATA_OUT8(ATA_SELECT, ata_device);
if(!wait_for_rdy()) {
DEBUGF("set_multiple_mode() - not RDY\n");
return -1;
}
ATA_OUT8(ATA_NSECTOR, sectors);
ATA_OUT8(ATA_COMMAND, CMD_SET_MULTIPLE_MODE);
if (!wait_for_rdy())
{
DEBUGF("set_multiple_mode() - CMD failed\n");
return -2;
}
return 0;
}
#ifdef HAVE_ATA_DMA
static int ata_get_best_mode(unsigned short identword, int max, int modetype)
{
unsigned short testbit = BIT_N(max);
while (1) {
if (identword & testbit)
return max | modetype;
testbit >>= 1;
if (!testbit)
return 0;
max--;
}
}
#endif
static int set_features(void)
{
static struct {
unsigned char id_word;
unsigned char id_bit;
unsigned char subcommand;
unsigned char parameter;
} features[] = {
{ 83, 14, 0x03, 0 }, /* force PIO mode by default */
#ifdef HAVE_ATA_DMA
{ 0, 0, 0x03, 0 }, /* DMA mode */
#endif
/* NOTE: Above two MUST come first! */
{ 83, 3, 0x05, 0x80 }, /* adv. power management: lowest w/o standby */
{ 83, 9, 0x42, 0x80 }, /* acoustic management: lowest noise */
{ 82, 5, 0x02, 0 }, /* enable volatile write cache */
{ 82, 6, 0xaa, 0 }, /* enable read look-ahead */
};
int i;
int pio_mode = 2; /* Lowest */
/* Find out the highest supported PIO mode */
if (identify_info[53] & (1<<1)) { /* Is word 64 valid? */
if (identify_info[64] & 2)
pio_mode = 4;
else if(identify_info[64] & 1)
pio_mode = 3;
}
/* Update the table: set highest supported pio mode that we also support */
features[0].parameter = 8 + pio_mode;
#ifdef HAVE_ATA_DMA
if (identify_info[53] & (1<<2)) {
int max_udma = ATA_MAX_UDMA;
#if ATA_MAX_UDMA > 2
if (!identify_info[76] && !(identify_info[93] & (1<<13))) /* w93b13 is only valid for PATA, w76 is 0 PATA */
max_udma = 2;
#endif
/* Ultra DMA mode info present, find a mode */
dma_mode = ata_get_best_mode(identify_info[88], max_udma, 0x40);
}
if (!dma_mode) {
/* No UDMA mode found, try to find a multi-word DMA mode */
dma_mode = ata_get_best_mode(identify_info[63], ATA_MAX_MWDMA, 0x20);
features[1].id_word = 63;
} else {
features[1].id_word = 88;
}
features[1].id_bit = dma_mode & 7;
features[1].parameter = dma_mode;
#endif /* HAVE_ATA_DMA */
ATA_OUT8(ATA_SELECT, ata_device);
if (!wait_for_rdy()) {
DEBUGF("set_features() - not RDY\n");
return -1;
}
for (i=0; i < (int)(sizeof(features)/sizeof(features[0])); i++) {
if (identify_info[features[i].id_word] & BIT_N(features[i].id_bit)) {
ATA_OUT8(ATA_FEATURE, features[i].subcommand);
ATA_OUT8(ATA_NSECTOR, features[i].parameter);
ATA_OUT8(ATA_COMMAND, CMD_SET_FEATURES);
if (!wait_for_rdy()) {
DEBUGF("set_features() - CMD failed\n");
return -10 - i;
}
if((ATA_IN8(ATA_ALT_STATUS) & STATUS_ERR) && (features[i].subcommand != 0x05)) {
/* some CF cards don't like advanced powermanagement
even if they mark it as supported - go figure... */
if(ATA_IN8(ATA_ERROR) & ERROR_ABRT) {
return -20 - i;
}
}
}
}
#ifdef ATA_SET_PIO_TIMING
ata_set_pio_timings(pio_mode);
#endif
#ifdef HAVE_ATA_DMA
ata_dma_set_mode(dma_mode);
#endif
return 0;
}
unsigned short* ata_get_identify(void)
{
return identify_info;
}
static int STORAGE_INIT_ATTR init_and_check(bool hard_reset)
{
int rc;
if (hard_reset)
{
/* This should reset both master and slave, we don't yet know what's in */
ata_device = 0;
if (ata_hard_reset())
return -1;
}
rc = master_slave_detect();
if (rc)
return -10 + rc;
/* symptom fix: else check_registers() below may fail */
if (hard_reset && !wait_for_bsy())
return -20;
rc = check_registers();
if (rc)
return -30 + rc;
return 0;
}
int STORAGE_INIT_ATTR ata_init(void)
{
int rc = 0;
bool coldstart;
if (ata_state == ATA_BOOT) {
mutex_init(&ata_mutex);
}
mutex_lock(&ata_mutex);
/* must be called before ata_device_init() */
coldstart = ata_is_coldstart();
ata_led(false);
ata_device_init();
ata_enable(true);
if (ata_state == ATA_BOOT) {
ata_state = ATA_OFF;
if (!ide_powered()) /* somebody has switched it off */
{
ide_power_enable(true);
sleep(HZ/4); /* allow voltage to build up */
}
#ifdef HAVE_ATA_DMA
/* DMA requires INTRQ be enabled */
ATA_OUT8(ATA_CONTROL, 0);
#endif
/* first try, hard reset at cold start only */
rc = init_and_check(coldstart);
if (rc)
{ /* failed? -> second try, always with hard reset */
DEBUGF("ata: init failed, retrying...\n");
rc = init_and_check(true);
if (rc) {
goto error;
}
}
rc = identify();
if (rc) {
rc = -40 + rc;
goto error;
}
multisectors = identify_info[47] & 0xff;
if (!multisectors && (identify_info[59] & 0x100) == 0x100)
multisectors = identify_info[59] & 0xff;
if (!multisectors)
multisectors = 1; /* One transfer per REQ */
DEBUGF("ata: max %d sectors per DRQ\n", multisectors);
total_sectors = (identify_info[61] << 16) | identify_info[60];
#ifdef HAVE_LBA48
if (identify_info[83] & 0x0400 && total_sectors == 0x0FFFFFFF) {
total_sectors = ((uint64_t)identify_info[103] << 48) |
((uint64_t)identify_info[102] << 32) |
((uint64_t)identify_info[101] << 16) |
identify_info[100];
ata_lba48 = true; /* use BigLBA */
}
#endif /* HAVE_LBA48 */
/* Logical sector size > 512B ? */
if ((identify_info[106] & 0xd000) == 0x5000) /* B14, B12 */
log_sector_size = (identify_info[117] | (identify_info[118] << 16)) * 2;
else
log_sector_size = 512;
rc = freeze_lock();
if (rc) {
rc = -50 + rc;
goto error;
}
rc = set_features(); // error codes are between -1 and -49
if (rc) {
rc = -60 + rc;
goto error;
}
#ifdef MAX_PHYS_SECTOR_SIZE
rc = ata_get_phys_sector_mult();
if (rc) {
rc = -70 + rc;
goto error;
}
#endif
ata_state = ATA_ON;
keep_ata_active();
}
rc = set_multiple_mode(multisectors);
if (rc)
rc = -100 + rc;
rc = identify();
if (rc) {
rc = -40 + rc;
goto error;
}
error:
mutex_unlock(&ata_mutex);
return rc;
}
#if (CONFIG_LED == LED_REAL)
void ata_set_led_enabled(bool enabled)
{
ata_led_enabled = enabled;
if (ata_led_enabled)
led(ata_led_on);
else
led(false);
}
#endif
long ata_last_disk_activity(void)
{
return last_disk_activity;
}
int ata_spinup_time(void)
{
return spinup_time;
}
#ifdef STORAGE_GET_INFO
void ata_get_info(IF_MD(int drive,)struct storage_info *info)
{
unsigned short *src,*dest;
static char vendor[8];
static char product[16];
static char revision[4];
#ifdef HAVE_MULTIDRIVE
(void)drive; /* unused for now */
#endif
int i;
info->sector_size = log_sector_size;
info->num_sectors = total_sectors;
src = (unsigned short*)&identify_info[27];
dest = (unsigned short*)vendor;
for (i=0;i<4;i++)
dest[i] = htobe16(src[i]);
info->vendor=vendor;
src = (unsigned short*)&identify_info[31];
dest = (unsigned short*)product;
for (i=0;i<8;i++)
dest[i] = htobe16(src[i]);
info->product=product;
src = (unsigned short*)&identify_info[23];
dest = (unsigned short*)revision;
for (i=0;i<2;i++)
dest[i] = htobe16(src[i]);
info->revision=revision;
}
#endif
#ifdef HAVE_ATA_DMA
/* Returns last DMA mode as set by set_features() */
int ata_get_dma_mode(void)
{
return dma_mode;
}
/* Needed to allow updating while waiting for DMA to complete */
void ata_keep_active(void)
__attribute__((alias("ata_spin")));
#endif
#ifdef CONFIG_STORAGE_MULTI
int ata_num_drives(int first_drive)
{
/* We don't care which logical drive number(s) we have been assigned */
(void)first_drive;
return 1;
}
#endif
int ata_event(long id, intptr_t data)
{
int rc = 0;
/* GCC does a lousy job culling unreachable cases in the default handler
if statements are in a switch statement, so we'll do it this way. Only
the first case is frequently hit anyway. */
if (LIKELY(id == Q_STORAGE_TICK)) {
/* won't see ATA_BOOT in here */
if (ata_state != ATA_ON || !ata_sleep_timed_out()) {
#ifdef HAVE_ATA_POWER_OFF
if (ata_state == ATA_SLEEPING && ata_power_off_timed_out()) {
power_off_tick = 0;
mutex_lock(&ata_mutex);
logf("ata OFF %ld", current_tick);
ide_power_enable(false);
ata_state = ATA_OFF;
mutex_unlock(&ata_mutex);
}
#endif
STG_EVENT_ASSERT_ACTIVE(STORAGE_ATA);
}
}
else if (id == Q_STORAGE_SLEEPNOW) {
ata_sleepnow();
}
else if (id == Q_STORAGE_SLEEP) {
last_disk_activity = current_tick - sleep_timeout + HZ / 5;
}
#ifndef USB_NONE
else if (id == SYS_USB_CONNECTED) {
logf("deq USB %ld", current_tick);
if (ATA_ACTIVE_IN_USB) {
/* There is no need to force ATA power on */
STG_EVENT_ASSERT_ACTIVE(STORAGE_ATA);
}
else {
mutex_lock(&ata_mutex);
if (ata_state < ATA_ON) {
ata_led(true);
if (!(rc = ata_perform_wakeup(ata_state))) {
ata_state = ATA_ON;
}
ata_led(false);
}
mutex_unlock(&ata_mutex);
}
}
#endif /* ndef USB_NONE */
else {
rc = storage_event_default_handler(id, data, last_disk_activity,
STORAGE_ATA);
}
return rc;
}
Reference in a new issue View git blame Copy permalink