when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
Mostly for the sake of reducing latency for audio servicing where other service
routines can take a long time to complete, leading to occasional drops of a
few samples, especially in recording, where they are fairly frequent.
One mystery that remains is GPIOA IRQ being interrupted causes strange
undefined instruction exceptions, most easily produced on my Fuze V2 with a
scrollwheel. Making GPIOA the top ISR for now, thus not interruptible, cures it.
SVC mode is used during the actual calls. Hopefully the SVC stack size is
sufficient. Prologue and epilogue code only uses the IRQ stack and is large
enough.
Any routine code that should not be interrupted should disable IRQ itself from
here on in.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31642 a1c6a512-1295-4272-9138-f99709370657
move prototypes to ascodec.h
move code to ascodec*.c
YPR0: use adc-as3514.c instead of duplicating it
TODO: merge as3514.h and ascodec.h ?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31626 a1c6a512-1295-4272-9138-f99709370657
playing from µSD now works to some degree
database update or copy between the 2 drives lock up
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27496 a1c6a512-1295-4272-9138-f99709370657
fuzev2 button_read_device() runs in interrupt context so writes are atomic
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27494 a1c6a512-1295-4272-9138-f99709370657
- Revert BUTTON_HOME
- Modifications to SD driver (µSD not working yet)
TODO: µSD and FM radio
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27492 a1c6a512-1295-4272-9138-f99709370657
it would still flash when the light was off
it turns out that if B5 is set to input the light can't be turned on
but we can still select between µSD slot and internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26059 a1c6a512-1295-4272-9138-f99709370657
- remove udelay(1) and use the previous busy loop : the delay was too
long for proper hold detection
- remove the 2nd delay (unneeded)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25741 a1c6a512-1295-4272-9138-f99709370657
Use it in fuzev2 to improve some big delays (correct the biggest one to actually wait for the fifo to empty), and use it in the sd drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25734 a1c6a512-1295-4272-9138-f99709370657
Revive the delay removed by r25636 (and make it longer so it works when
boosted)
Also read GPIOA pins 7 & 6 in one load
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25722 a1c6a512-1295-4272-9138-f99709370657
It is equally fast and doesn't need an additional mask
Thanks to amiconn for pointing to it
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25477 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
