iap_reset_state() and iap_getc() are now passed the logical IAP port
(0 is dock/only connector, 1 is headphone connector)
Change-Id: I97421146a8cab032b90c9b4eb55b50aa00d73312
Cortex-M processors don't have an MMU, but can still have caches
that need software management, so on those platforms we don't want
to include the MMU related functions.
While here, remove an outdated section of a comment referring to
deprecated cache maintenance functions which no longer exist.
Change-Id: I6f0fe694560bdee25ed7c69a846bf46e3e544cb1
Looks like they were always off-by-one, so the wrong functions have been used to rectify this bug. This is now properly fixed.
No changes to the ipodnano2g binaries (bootloader, rockbox)
Change-Id: I19fe1b89f9e5d722f7e877d60f68fc3275c3642a
when battery_bench is run
exports a file in the rockbox directory called 'battery_levels.default'
if the user wants their own levels they can rename the file battery_levels.cfg
and it will be loaded at boot
some minimal error checking is performed prior to using the values
added manual entry
Change-Id: Ia0126faced0c7229fcf8385a1bcb584b5a9dc378
Comments and notes are converted to UTF-8. Already broken multibyte characters are fixed using common sense.
This patch contains no code changes.
Change-Id: Ia511ab84936cb2495ac17309493a9b98727a7902
This is part of the preparation to add support for iPod Nano 3G and Nano 4G. There are some optimisations left, like merging similar blocks of registers that share the same layout, but the base address have changed between SoC generations.
Change-Id: I4f06727b4061977141b65d39ae19591bd5b29680
This is a driver for the UART controller on the S5L87xx series of SoCs, which is named after the SoC family.
Since S5L8720 is confirmed to have the same interface and the newer models probably also have it, the driver is renamed to reflect this.
Change-Id: I974c002924372e860db0e49235d108dab87f8831
* Create new 'sector_t' type alias:
* uint64_t for all targets with HAVE_LBA48 or HAVE_SDUC
* unsigned long for the everything else
* Alter all storage APIs to use sector_t instead of 'unsigned long'
* Alter Volume/Partition/storage info structures to use sector_t
* Disk cache converted to sector_t
* ATA Core:
* convert to using sector_t for sector addresses and drive sizes
* Always fill out upper 16 bits of LBA48 addresses
* IDENTIFY INFO is fixed at 512 bytes, not SECTOR_SIZE
* USB mass storage:
* convert to using sector_t for sector addesses and drive sizes
* Implement READ_16/WRITE_16 for LBA48 addresses
* Convert FAT code to use sector_t for all sector references
* output_dyn_value() now accepts int64_t instead of 'int'
* Corrected "rockbox info" to work for (MULTIVOLUME & !MULTIDRIVE)
* Better reporting of disk and (logical+physical) sector sizes in debug info
* Detect SDUC cards and report on storage debug_info screen
To-do: SDUC
* Refactor SD core to remove duplicate code in every driver
* Card probe and init state machine
* Implement core SDUC support
* SD2.0 needs to be 2.0+ (fixed for jz47xx and x1000)
* Host and Card ID (ACMD41)
* 32-bit addressing for all read/write/erase operations (CMD22)
* ADD SDUC to target device drivers, defining HAVE_SDUC as appropriate
Change-Id: Ib0138781a0081664d11511037685503df1b93608
Only the primary contexts (standard, wps, quckscreen, tree, radio)
handle the new keys so far.
Todo contexts: Settings, keyboard, pitchscreen, bookmark, & recording.
Available docs for MODE4 don't list anything other than playback
controls, so it's not clear if there is a path forward here.
Change-Id: I91908092f75d96813e2e155e447129ba15f58051
Calling multiple levels of indirection in a loop slows things down
Really these need to be rewritten to take a start and end address
like most of the rest of the codebase
But this is safer without having test hardware in hand
Change-Id: Idae7b92ee779d020ed7fcc9334e2d5a9c710e64d
* pcm_get_bytes_remaining()
* pcm_calculate_peaks()
* pcm_get_peak_buffer()
Nothing in-tree uses these at all (except for the lua plugin wrapper)
Change-Id: I971b7beed6760250c8b1ce58f401a601e1e2d585
Nothing in the core has used it for some time. It's exported to the
plugin API but the last plugins to use it were switched to the mixer API
back in 2011.
This allows us to get rid of pcm_play_dma_pause() from all audio drivers
Change-Id: Ic3fa02592316f84963e41d792d1cabb436d1ff6b
* Editing a bunch of drivers' thread routines in order to
implement a new feature is tedious.
* No matter the number of storage drivers, they share one thread.
No extra threads needed for CONFIG_STORAGE_MULTI.
* Each has an event callback called by the storage thread.
* A default callback is provided to fake sleeping in order to
trigger idle callbacks. It could also do other default processing.
Changes to it will be part of driver code without editing each
one.
* Drivers may sleep and wake as they please as long as they give
a low pulse on their storage bit to ask to go into sleep mode.
Idle callback is called on its behalf and driver immediately put
into sleep mode.
* Drivers may indicate they are to continue receiving events in
USB mode, otherwise they receve nothing until disconnect (they
do receive SYS_USB_DISCONNECTED no matter what).
* Rework a few things to keep the callback implementation sane
and maintainable. ata.c was dreadful with all those bools; make
it a state machine and easier to follow. Remove last_user_activity;
it has no purpose that isn't served by keeping the disk active
through last_disk_activity instead.
* Even-out stack sizes partly because of a lack of a decent place
to define them by driver or SoC or whatever; it doesn't seem too
critical to do that anyway. Many are simply too large while at
least one isn't really adequate. They may be individually
overridden if necessary (figure out where). The thread uses the
greatest size demanded. Newer file code is much more frugal with
stack space. I barely see use crack 50% after idle callbacks
(usually mid-40s). Card insert/eject doesn't demand much.
* No forcing of idle callbacks. If it isn't necessary for one or
more non-disk storage types, it really isn't any more necessary for
disk storage. Besides, it makes the whole thing easier to implement.
Change-Id: Id30c284d82a8af66e47f2cfe104c52cbd8aa7215
Some drivers set tm_wday just fine and do not need it coerced to
be correct. Others set tm_yday, so don't overwrite what the driver
sets; just zero it inside if it can't fill the field. Move calls
to set_day_of_week() to the sorts of drivers that presumably
required the hammer (FS#11814) in get_time() where the weekday
isn't locked to the date.
Change-Id: Idd0ded6bfc9d9f48fcc1a6074068164c42fcf24a
Add UART support for s5l8700/1 using the UC870X UART controller,
actually the functionallity is disabled and must be enabled for
each individual target. Tested on iPod Nano 2G (s5l8701), not
tested on s5l8700.
Change-Id: Ic0f216bb871502d355a70e4b658e536a2c0976a9
This should allow FireWire charging to work on these devices.
It also adds charging state detection on the iPod Classic.
(cherry picked from commit fa86fec4fb089b47f5c2c3b1f2f3dbc97551895b)
On Classic (and probably Nano 2G), it seems that the 100/500mA limit
applies only to USB chargers, when FW is connected it supplies all the
power (even if USB is also connected) and USB current limit does not
affect to FW charging, therefore the limit is only set when USB is
connected.
Change-Id: I7c6bab1b6a0f295367999c45faeda6085c3fb091
Signed-off-by: Cástor Muñoz <cmvidal@gmail.com>
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
Remove the implementations of all exceptions handlers from the
various crt0.S files and have a single implementation in system-arm.h
The new implementation is weak so that it can be overwritten by some
specific code (like the unwinder)
Change-Id: Ib3e041ed6037376bbe0e79286057e1051640dd90
Reviewed-on: http://gerrit.rockbox.org/205
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Yeah, sizeof (void) here with GCC is 1. If something has a problem
with that, we'll set it straight.
Change-Id: I9ad3eee75dd440f6404a04a501d1533c8bc18ba9
Additional status callback is added to pcm_play/rec_data instead of
using a special function to set it. Status includes DMA error
reporting to the status callback. Playback and recording callback
become more alike except playback uses "const void **addr" (because
the data should not be altered) and recording uses "void **addr".
"const" is put in place throughout where appropriate.
Most changes are fairly trivial. One that should be checked in
particular because it isn't so much is telechips, if anyone cares to
bother. PP5002 is not so trivial either but that tested as working.
Change-Id: I4928d69b3b3be7fb93e259f81635232df9bd1df2
Reviewed-on: http://gerrit.rockbox.org/166
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Change all lcd drivers to using a pointer to the static framebuffer
instead of directly accessing the static array. This will let us
later do fun things like dynamic framebuffer sizes (RaaA) or
ability to use different buffers for different layers (dynamic
skin backdrops!)
Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
