In mountpoint selection and system info dialog show the volume name to make it
easier to identify a specific device.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30141 a1c6a512-1295-4272-9138-f99709370657
Instead of entering the mountpoint via a tree browser or manually use a combo
box that lists all available drives / mountpoints. This also allows to easily
add more information like the free and total size for each mountpoint. For
development this can still be overriden by editing the dropdown value manually.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30140 a1c6a512-1295-4272-9138-f99709370657
The proxy settings are stored as string representation in the configuration
file. If username / password contains characters used as separators parsing the
string again will cause wrong results. Percent-encode them before storing, and
parse it as percent-encoded string when reading it back.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30071 a1c6a512-1295-4272-9138-f99709370657
To have a better indication what player has been detected and to keep this
information in view make the entry for the detected player bold. This also
(partly) addresses FS#10694.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29761 a1c6a512-1295-4272-9138-f99709370657
Make sure the temporary file doesn't get destroyed before it has been played.
Fixes the "Test TTS" button not giving a test playback anymore for TTS systems
that cannot do the playback themselves.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29760 a1c6a512-1295-4272-9138-f99709370657
The configuration dialog isn't needed anymore once the finished() signal is
emitted. In that case schedule it for deletion by the event loop.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29674 a1c6a512-1295-4272-9138-f99709370657
The OS X TTS engine (and likely others) allows outputting its speech directly
to the sound system. This avoids the extra step of creating a temporary file to
play for TTS preview. Currently implemented as TTS capability reported.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29672 a1c6a512-1295-4272-9138-f99709370657
Autodetection only showed an MTP device error for e200v1 and an unspecified
error for all other players (except if the detected player is an Ipod, in which
case the error indicates a WinPod). Consider all non-Ipod errors as MTP error.
Fix wrong MTP USB ID for e200v1 which made that detection fail even for e200v1.
Should fix FS#11563.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29621 a1c6a512-1295-4272-9138-f99709370657
Disable the "Test TTS" button during a running test and on invalid TTS
configuration.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29581 a1c6a512-1295-4272-9138-f99709370657
- Use ISO codes as keys for voice languages instead of enumeration.
- Instead of trying to select a suitable voicefile language from the UI
language use the ISO codes stored as UI language and match against the
mapping.
- Always store the selected UI language. Fixes the voicefile creation
language lookup to fail if the language used is the system language.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29207 a1c6a512-1295-4272-9138-f99709370657
Move class-less functions in utils.cpp into a new Utils class and make the old
functions static. This prevents clashes with system C functions. Rename some
functions to avoid macro problems (check() is a macro on OS X). Split out the
RockboxInfo class into a separate file.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25441 a1c6a512-1295-4272-9138-f99709370657
Rockbox Utility doesn't support "proxy auto-config" (aka PAC) for system proxy
settings. This can result in users selecting system proxy and expecting it to
work even if their system uses PAC. While the configuration dialog displays the
proxy setting values retrieved from the system this is not totally obvious. Add
a message telling if the retrieved system proxy values are not useable. For now
this only checks if a proxy host and port are set which should catch the usual
cases when PAC is used.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25435 a1c6a512-1295-4272-9138-f99709370657
- reorder value retrieval (display names etc) to cut down the number of
necessary accesses. While this is not critical it cuts down the noise
generated in the trace noticably.
- match the old target by its internal name instead of the display name.
- remove two access functions in SystemInfo that are not really needed anymore.
Accessing the values via platformValue() is much more logical and in line with
the rest of the value accesses.
- try to scroll to the selected item in the device list after setup and
detection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24988 a1c6a512-1295-4272-9138-f99709370657
Previously MacPods were detected but the mountpoint can't get resolved due to
the different partition layout, thus having a MacPod would only detect the Ipod
itself but not the mountpoint. Rockbox does not support MacPods, so inform the
user as soon as possible.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24799 a1c6a512-1295-4272-9138-f99709370657
This makes it possible for native dialogs to get used on Windows and OS X. The
mountpoint selection dialog needs special handling and still uses the
BrowseDirtree class for now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24703 a1c6a512-1295-4272-9138-f99709370657
Note that disabled targets support is not intended for use by end users.
This is to make development (and testing of svn) easier and should get
disabled for releases.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24513 a1c6a512-1295-4272-9138-f99709370657
- Display the name of a detected unsupported player when running autodetection from the configuration window.
- Extend the list of known-unsupported players.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22334 a1c6a512-1295-4272-9138-f99709370657
Remove the ugly "save, change and restore platform" accesses and extend the settings class to allow accessing player specific system values.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22254 a1c6a512-1295-4272-9138-f99709370657
Move check() function out of the Detect class and place it into utils.cpp for now. Rename Detect class to System, as it now only retrieves data about the underlying system and doesn't detect anything anymore. Cleans up with the confusion between Detect and Autodetection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22238 a1c6a512-1295-4272-9138-f99709370657
- use a single member function for accessing a settings value.
- use an enum to figure the correct value in the settings file instead of functions.
- return the settings value as QVariant instead and leave converting to the caller.
- accept QVariant as value when setting values.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20823 a1c6a512-1295-4272-9138-f99709370657
If the configuration is invalid display information about the issues and don't accept the values. Fixes issue reported in FS#9944.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20100 a1c6a512-1295-4272-9138-f99709370657
