When we request a thumb build on a non-thumb-only target, we hand
compilation to a script that tries to build everything as thumb, falling
back to non-thumb arm mode if the thumb build fails. In order for
this to work, the compiler flag -mthumb-interwork is required.
Move this definition out of the thumb-cc script, and into the configure
script (ie along with the other target-specific definitions)
Change-Id: Idc1f8caa088dbbf710b169b272de61cc0b7c9ca6
Pure file move, in preparation for a second Ingenic SoC.
dma, gpio, i2c, installer, kernel, nand and the SPL NAND backend
move from target/mips/ingenic_x1000/ to target/mips/ingenic/
Drivers that cannot move as whole files, because part of each is
genuinely X1000-specific, are left alone for now: msc, uart, sfc, the
debug menu and the OST helpers in system-x1000.c.
Verified as a no-op: built at target 246 --type=b before and after from
the same source path, bootloader.bin is byte-identical, and every moved
file's object has the same instruction stream under its new name.
Builds clean with no warnings for targets 246, 260 and 247, both
--type=n and --type=b.
Change-Id: I9f67c23384df49b8c4554d695b772bcd54a4e32f
Co-Authored-By: Claude Opus 5
This commit does the following changes to the 3ds port:
- Rename the target from ctru to 3ds.
- Rename all files and functions with the ctru naming convention to 3ds.
- Created a new file and folder structure that will better integrate future console ports that share the same codebase.
- Fixed a buffer overflow bug in pcm code.
Change-Id: I17c6f86df64eb99dd2b653485d70832ff46b2ba8
Rockbox Utility currently exposes SAPI5 voice speed but not the SAPI
voice volume. The encoder volume setting is applied after synthesis, so
it cannot prevent clipping or distortion already present in the
generated wave file.
This patch adds a Volume control to the SAPI5 TTS configuration. The
value is passed to the standard SpVoice.Volume property before
synthesis.
Change-Id: Ifa43e55f716f98150e94c86e5e6a6c8bce0ca852
Keep track of the type of skin file being parsed,
in case a tag needs this info.
E.g. %Lt should be ignored in any skin other than
SBS files.
Change-Id: Ib7e52c3e6810196cb566adb65619a1b847cf20ef
This means it will end up in nightlies, get voice builds, etc.
Next up is to add it to the themesite..
Change-Id: I78dc77addebceb49773adaa3b70e9a457585fe62
HibyOS-based target: keymaps, LED, powermgmt, bootloader and sim support,
plus cabbiev2 for the new 360x640x16 screen. Opus 5 helped w/ debugging
and the initial scaffolding.
Updated name to FB_STRIDE_MISMATCH, added simulator bmp and specs.
Change-Id: If797ac6581cf75d9d1fcf36e615ee03cf6f905d6
- makes SOURCE_DATE_EPOCH affect BUILDDATE and version string
- makes wpsbuild.pl output deterministic
- omits unnecessary extended metadata from zip files
- runs strip-nondeterminism on zip files if REPRODUCIBLE_ZIP is set
Change-Id: I1617e3f5233b2bc356fcfa6457be1a7785c303f9
This covers the rockbox binary (or bootloader), which increases the zip
file by 60-80k depending on the target.
It currently *excludes* codecs and plugins, which can add over 1MB to
the zip file. We can revisit this when/if we move to distributing 7zip
files instead.
Change-Id: Iec72dd3aa634ceca716975c13b7fa8707a485d30
The existing code treated any ready-read notification from cscript as
proof that synthesis had completed. The SAPI script can emit other
output, so the Utility could check for the wave file before the explicit
SYNC reply and report that the output file did not exist.
The script also used global "On Error Resume Next" without reporting
errors from SpFileStream.Open(), SpVoice.Speak(), or
SpFileStream.Close(). Several waits had no timeout, allowing the GUI
thread to remain blocked indefinitely.
The changes:
* reports SAPI COM errors to Rockbox Utility;
* verifies that SAPI actually created the requested wave file;
* waits for the explicit SYNC reply instead of any process output;
* applies finite timeouts to vendor queries, synthesis, and shutdown;
* terminates a stuck private cscript process safely;
* restarts cscript and retries the current string up to three times when a
third-party SAPI engine stops responding during a long generation run.
Change-Id: I2cf2aefb704353c648bef0c4312f35282ac4e25d
It is always enabled, except in the following situations:
* bootloaders
* warble or checkwps applications
* devices with less than 4MB of RAM
* imx233-based devices
imx233 is a special case; that will be backed out we figure out why
it fails to boot if the binary size exceeds 1MB.
Change-Id: If4a89e389f562bb5791a565fba99c830213473d3
The simulator on macOS has been broken since macOS 26.4
was introduced. On macOS 26.4, 26.5, and the 27 beta,
thread setup fails in make_context (firmware/asm/thread-
unix.c), because sigaltstack returns an "Operation not
permitted" error. Fall back to SDL threads until this
can be fixed.
Also update GCC to keep it in sync with the latest
Homebrew formula
(https://formulae.brew.sh/formula/gcc).
Change-Id: Ib08ac81ede00c577f28a85c7886f716e7504bbe9
When a font doesn't have a glpyh for a given codepoint, the convertor
points it at the "default glyph". The plan is to replace this pointer
with a canary value so that rockbox genuinely knows this glpyh
does not exist, allowing a fallback path to be implemented.
(The plan is for the fallback path to attempt to compose a glpyh from
its decomposed codepoints, but this would make it be possible to
implement a true fallback/subsitute font mechanism)
Change-Id: If6fea29f5393a6d4b9d5747c911a36fdc8dda5ae
Formerly fixed at the first glpyh in the converted font; now it can be
explicitly set. This mirrors the functionality available from using the
DEFAULT_CHAR property of BDF fonts
Change-Id: Ibd754faff3fd4d393c4781e8faa685612e3301f0
add a plugin_ram_end symbol to plugin.lds and rewrite ovl_offset.pl
to read plugin_ram_end and plugin_load_end_addr from the elf via nm.
this removes all dependence on the linker map file format, which
differs between gnu ld and lld.
Change-Id: I66e623d9a2b44eb84ae7035155c84d8afe46df23
which is required for u"" unicode string literals used in the USB stack.
gcc allows this even in gnu99, but clang does not.
Change-Id: I1700fe503f20f31ba4704f8bef1ccca45f822620
-fstack-protector only needs a small amount of runtime
support to work on native builds. It increases code size
by ~1.5% on ARM/MIPS; -fstack-protector-strong adds 3-4%.
This is disabled by default and must be enabled by passing
'--with-stack-protector' to configure.
Change-Id: If952e711d3673c9b469895f08c7bff70b3d95df6
- Allow overriding of the smdhtool and 3dsxtool programs
- Introduce dependencies in ctru.make for 3dsx and cia packages
- Build these packages when the binary is built
- Copy instead of moving the cia package when building a zip
- Properly clean all build artifacts when make clean is used
Change-Id: I2069bcc44d6ab6031ef61ed9980f92ff9a913bc9
- Move all devkitpro includes before the Rockbox ones so that the macros which are both conflicting and unused can be undef'd
- Remove unused result variables
- Exclude an unused function from being compiled for this target
- Fix hex number formatting
- Fix the return value of dummy functions
- Fix macro redefinition in the plugins keypad config
- Remove duplicate button mapping
- Turn off -Wchar-subscripts as it's already handled in Rockbox's ctype.h
Change-Id: I3f5a3d492c585f233277a380feaea5fe877a044f
If the list of plugins given to configure did not include
a subdir-based plugin, then all subdir-based plugins would
be built (since SELECTED_PLUGINS_SUBDIRS is empty then).
To prevent this issue use an explicit value ('DEFAULT') to
signal that we want to build the standard set of plugins.
Change-Id: I42d9dc8d754ed9ac1cd4b5c62c0a106ca3dfcd91
The preprocess2file helper is mainly used to preprocess
linker scripts, but piping the preprocessor output to
'grep' masks the exit code of gcc, so if it fails (eg.
due to an #error directive) then it does not cause the
build to fail like it should.
In this particular case the grep commands don't seem to
be doing anything, since the "-P" option suppresses line
markers, which "grep -v ^$(_hash)" is probably meant to
filter out. The intent behind "grep -v ^$$" is unclear
since the preprocessor doesn't seem to output any line
beginning with '$', but in any event it seems unnecessary.
Change-Id: Ie23f5de1fe1bfb5890c7b2f3c7fa05401931d89f
Use ":" as the separator. Useful for plugin development and debugging.
Example:
../tools/configure --target=hibyr1 --type=ADS --plugins="properties.c:imageviewer"
This creates a debug simulator build for Hiby R1 with the properties.c file and the imageviewer directory plugins enabled.
Change-Id: If974cfb0c54bd2c1a53ae11cc3f942c698ef2fe4
