None of the Sony up to A15 seem to support RDS (they use either Si4702 or Si4708),
thus I did not add any code to support RDS.
Change-Id: I64838993b9705b36b94665f8470c7a89c772c961
We don't really know what those are supposed to do. They seem to change the
volume curve but it is not very clear what is the intended purpose.
Change-Id: I65f5d18aba139844c23df092277ba17ee8518f96
sonynwz: quirk for cpufreq broken driver
There was some redundancy between frequency_linux(cpu, true) and
current_scaling_frequency(), also I see no reason to compile the cpuinfo stuff
unconditionally and the scaling info only on DX since it was already printed
some partial scaling info anyway. Thus compile all the code unconditionally
and simplify the logic in the debug menu. Also avoid putting buffers of size
PATH_MAX on stack since it can be quite big and we only requires 64 bytes
for those paths.
On Sony NWZ, the cpu driver reports frequency in MHz instead of kHz thus we need
to make the cpuinfo code aware of that bug.
Change-Id: I61af45ab5f179ecc909b4841b9137a915a60193a
We still miss the model IDS for those device so scsitool won't be able to
recognize them automatically.
Change-Id: I17ae0f0d95c011cea8e289def63c7673b6c4b667
Always compile in pcm_alsa_set_digital_volume, the linker will optimize it
away on targets that don't use it.
Change-Id: Ia21c3eaa8a64b75761ab5d056361e7ed1fcf949a
This requires a few changes unrelated to the A860 because configure unsets
APPLICATION but the NWZ is an application!
Change-Id: Id91aa23193383ac95886b281653da5286edd9caf
SUPPORTED SERIES:
- NWZ-E450
- NWZ-E460
- NWZ-E470
- NWZ-E580
- NWZ-A10
NOTES:
- bootloader makefile convert an extra font to be installed alongside the bootloader
since sysfont is way too small
- the toolsicon bitmap comes from the Oxygen iconset
- touchscreen driver is untested
TODO:
- implement audio routing driver (pcm is handled by pcm-alsa)
- fix playback: it crashes on illegal instruction in DEBUG builds
- find out why the browser starts at / instead of /contents
- implement radio support
- implement return to OF for usb handling
- calibrate battery curve (NB: of can report a battery level on a 0-5 scale but
probabl don't want to use that ?)
- implement simulator build (we need a nice image of the player)
- figure out if we can detect jack removal
POTENTIAL TODOS:
- try to build a usb serial gadget and gdbserver
Change-Id: Ic77d71e0651355d47cc4e423a40fb64a60c69a80
si4700_rds_process() should only be called on the rising edge of
RDSR since it now rejects segments out of sequence. Receiving the
same segment multiple times due to rapid polling is of course out
of sequence so do no more processing until RDSR bit cycles to
avoid repeatedly sending the same data instance.
I don't have the tools installed to test compile so there could be
typos. However, I tested on gigabeat-s with YPR0 setup copied over
and it fixed the issue with PS and RT.
Change-Id: Iab511bef64030de8c07d4d22dcf338c8720e2ae2
* Remove unused bits like the radio event and simplify basic
radio interface. It can be more self-contained with rds.h only
required by radio and tuner code.
* Add post-processing to text a-la Silicon Labs AN243. The chip's
error correction can only do so much; additional checks are highly
recommended. Simply testing for two identical messages in a row
is extremely effective and I've never seen corrupted text since
doing that, even with mediocre reception.
Groups segments must arrive in order, not randomly; logic change
only accepts them in order, starting at 0.
Time readout was made a bit better but really we'd need to use
verbose mode and ensure that no errors were seen during receiving
of time and more checks would be need to have a stable PI. The
text is the important bit anyway.
* Time out of stale text.
* Text is no longer updated until a complete group has been
received, as is specified in the standard. Perhaps go back to
scrolling text lines in the radio screen?
* Add proper character conversion to UTF-8. Only the default G0
table for the moment. The other two could be added in.
* Add variants "RDS_CFG_PROCESS" and "RDS_CFG_PUSH" to allow
the option for processed RDS data to be pushed to the driver and
still do proper post-processing (only text conversion for now for
the latter).
Change-Id: I4d83f8b2e89a209a5096d15ec266477318c66925
On Windows 64-bit, the size of long is 32-bit, thus any pointer to long cast is
not valid. In any case, one should use intptr_t and ptrdiff_t when casting
to integers. This commit attempts to fix all instances reported by GCC.
When relevant, I replaced code by the macros PTR_ADD, ALIGN_UP from system.h
Change-Id: I2273b0e8465d3c4689824717ed5afa5ed238a2dc
The kernel on this device reports nonexistent key presses, in particular it
reports right presses when pressing the left button... Since when it happens,
the right press comes after the left one, the new code simply ignores any
right press when the left button in pressed.
Change-Id: Ib6ced02682d9cecf4c7f6c58834907a667419cd7
This patch enables "Settings -> Sound Settings -> DAC's filter roll-off" for the
iBasso DX50.
Confirmed working on iBasso DX50, firmware 1.6.
Change-Id: I901615541d8fa4f6550c5156cf8c6069f5bdf9d0
Depends on http://gerrit.rockbox.org/r/#/c/1043/.
This patch adds a new setting in Settings -> General -> System: USB Mode.
Usable in Quickscreen and Shortcuts.
Possible settings are:
- Mass Storage: The default, on USB connect export the internal and external
drives as usual. Rockbox will exit gracefully in this case, since the internal
drive (/mnt/sdcard) is exported as mass storage device and Android prevents
Rockbox from continued execution.
- Charge Only: USB charge only, do not export the internal and external drives.
This will not close Rockbox.
- ADB: Enable the Android Debug Bridge. This will not close Rockbox.
Charge only and ADB are actually the same, since it is not yet established if
charge only is doable without adb and major hooks into Android.
German translation provided.
This may be genric for Android based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I616247c29946c6595ebcf8f0c14b2410c9f0498b
Depends on http://gerrit.rockbox.org/r/#/c/1043/.
This patch adds a new setting in Settings -> General
-> System: Freq Scaling Governor
Usable in Quickscreen and Shortcuts.
Possible settings are:
- Conservative: Slow frequency switching.
- Ondemand or Interactive: Fast frequency switching.
- Powersave: Allways lowest frequency.
- Performance: Allways highest frequency.
German translation provided.
This may be genric for Android kernel based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I10296f5be9586ad3a409105db0cd03682a30e9c1
Reorganization
- Separated iBasso devices from PLATFORM_ANDROID. These are now standlone
hosted targets. Most device specific code is in the
firmware/target/hosted/ibasso directory.
- No dependency on Android SDK, only the Android NDK is needed.
32 bit Android NDK and Android API Level 16.
- Separate implementation for each device where feasible.
Code cleanup
- Rewrite of existing code, from simple reformat to complete reimplementation.
- New backlight interface, seperating backlight from touchscreen.
- Rewrite of device button handler, removing unneeded code and fixing memory
leaks.
- New Debug messages interface logging to Android adb logcat (DEBUGF, panicf,
logf).
- Rewrite of lcd device handler, removing unneeded code and fixing memory leaks.
- Rewrite of audiohw device handler/pcm interface, removing unneeded code and
fixing memory leaks, enabling 44.1/48kHz pthreaded playback.
- Rewrite of power and powermng, proper shutdown, using batterylog results
(see http://gerrit.rockbox.org/r/#/c/1047/).
- Rewrite of configure (Android NDK) and device specific config.
- Rewrite of the Android NDK specific Makefile.
Misc
- All plugins/games/demos activated.
- Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa.
Includes
- http://gerrit.rockbox.org/r/#/c/993/
- http://gerrit.rockbox.org/r/#/c/1010/
- http://gerrit.rockbox.org/r/#/c/1035/
Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight
interface and new option for hold switch, touchscreen, physical button
interaction.
Rockbox needs the iBasso DX50/DX90 loader for startup, see
http://gerrit.rockbox.org/r/#/c/1099/
The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If
/mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit
gracefully and the loader will restart Rockbox on USB disconnect.
Tested on iBasso DX50.
Compiled (not tested) for iBasso DX90.
Compiled (not tested) for PLATFORM_ANDROID.
Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
System -> Debug (Keep Out) -> View CPU stats
Will now show the current cpufreq scaling governor, minimum, current and
maximum cpufreq scaling frequency for each CPU.
This may be genric for Android kernel based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I53e212f8707bf2abaa557e297293fb559ac37058
The GPIO APIs for ypr0 and ypr1 targets was messy, requiring a
direct communication via several ioctls calls.
Since it is planned to add support to other devices, more GPIO are
going to be used. For that reason the functions shall be clear and
easy to use.
Change-Id: Ia2304335e1fed1305cc2c4320bd4c097e13079be
Some people reported strange charging times and
strange battery life.
Charging by OF: 25 hours; RB: 18 hours
It has been found that there are at least two issues here:
1) the way of getting battery charging status wasn't
really accurate. This attempts to fix that issue.
This patch also simplifies some code (opening a
device is no more needed, for example).
To technically explain, battery charging implies first a constant
current mode (where the voltage increases) and then a constant
voltage mode (where, obviously, the voltage reads more or less
the same). The old way the End Of Charge was detected was based solely
on the voltage, while now it is based on chip's EOC interrupt,
which should be more accurate.
2) OF explicitly sets a constant current 350 mA, while we usually had
55 mA (by as3543 default).
This wasn't discovered before since there is a caching problem
("an accurate guess") in the Samsung power mgmt Linux module,
thus its debugging dumper wasn't really working, reporting a 55 mA current.
Strangely this option should have been set by the bootloader
but apparently it does not.
Some testing is still needed, but I confirm that with this patch
I could run a benchmark for 25 hours (vs. 18 hours), by charging
within Rockbox of course.
Change-Id: I3bd921e86b9018d1cc3c720d15cc46896e8490b3
The refactoring of the audio thread in this commit
-----------------------------------------------
commit 5857c44017
Author: Michael Sevakis <jethead71@rockbox.org>
Date: Fri May 31 02:41:02 2013 -0400
Refactor audio thread to run both recording and playback.
-----------------------------------------------
moved pcm_init() next to dsp_init() in apps/main.c:init().
Before that pcm_init() was called by audio_init().
Unfortunately the maemo init code didn't properly
wait until the maemo thread was fully initialized,
leading to dangling pointers when the code called
by pcm_init() tried to access maemo's variables.
Fix it by refactoring the "very fast shutdown" semaphore
to wait until maemo is initialized in any case.
This should also fix very rare rockbox crashes
on startup that I got once a year or so.
The new code has been tested by a script that
starts and kills rockbox after one second.
Change-Id: I464efce5f2b71ca869c72a5bc578555b8022e459
7d1a47cf13 introduced a regression that broke it completely so that
it couldn't boot into the main menu anymore. It had a faulty call to
get_volume_name() which made handle_special_links() act up. This broke
every open() and opendir() (and friends) library calls.
Change-Id: I399960ca8fb6e3bcc1f25c9b4a3c19a6d28b77bd
This changes iBasso DX50/DX90 config from CHARGING_SIMPLE (Simple, hardware
controlled charging (CPU cannot read charger state but may read when power is
plugged-in) to CHARGING_MONITOR (Hardware controlled charging with monitoring
(CPU is able to read HW charging state and when power is plugged-in)).
Not really usefull at the moment, since USB connection (charging) is not (yet)
gracefully handled for iBasso devices.
Change-Id: I55da81b10637d4de88d713ea5eba08eb59bc629f
Reviewed-on: http://gerrit.rockbox.org/1010
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
